With the continuous popularization and promotion of new energy vehicles, in order to ensure that new energy vehicles can run better, the problem of charging new energy vehicles must be solved. The construction of the new energy electric vehicle charging station is to ensure that the charging of the electric vehicle can be more convenient. Then the charging station needs to pay attention to the following issues when it is built. First, the choice of construction sites. The location of the car charging station should be chosen to maintain a proper distance because the distance traveled after a single charge of the electric car is limited, and the distance between the two charging piles must be able to ensure the distance the car is charged once. In some special road sections, a certain number of charging piles will be added to ensure the convenience of charging electric vehicles. The construction of charging stations is different from that of gas stations. There are no specific requirements for site selection. As long as there are enough open spaces to meet the requirements of construction, the most important consideration in the selection of construction sites is the consideration of distance. Second, the construction of the charging system must comply with the relevant technical standards. The construction of new energy electric vehicle charging stations must meet certain technical standards. For example, the output voltage and current of charging piles should be able to meet the requirements of car charging. Unlike refueling cars, charging takes a certain amount of time. If charging piles cannot be charged within a certain period of time due to technical standards, then the use of cars has a great influence. Therefore, when designing the charging station, it is necessary to fully consider the relevant design standards and specifications, so as to meet the charging requirements of the new energy electric vehicle. Third, the construction of charging stations must ensure safety. The construction of the charging station must fully consider the safety, the charging equipment and the system should be safe, the configuration of the monitoring equipment should be well done, and the charging environment and charging data should be mastered in time, and abnormal situations should be handled in time. The safety of the charging station is very important. Once a danger occurs, it not only affects the safety of the charging vehicle and the owner, but also has a great influence on the safety of the surrounding people and buildings. Copper conductive rate is very good,Machining Copper(including Machining Brass,machining bronze) is the use of CNC machining out, including turning, drilling, cutting, and screw teeth, etc.. Machining copper commonly used materials: copper, brass, bronze, beryllium copper. the surface treatment is generally silver plating, gold, some laser LOGO, we have a special inspection department to carry out inspection, and ensure that each size to meet the requirements of the drawings, including machining copper applied in various industries: household appliances, conductive slip ring, communications, medical equipment, industrial automation equipment. Machining Copper Machining Copper,Machining Beryllium Copper,Micro Machining Copper,Electrical Discharge Machining Copper,Copper Machining Buildre Group Co., Ltd. , https://www.bldcncmachining.com