Instructions for use of high-speed rotary tablet press 1. Repeat the inspection of the quality of the die before use, whether there are missing edges, cracks, deformation and looseness, and whether the device is intact and good. 2. Check whether the powder of the granular material is dry and the powder content in the granules is preferably not more than 10%. If it is not qualified, do not press hard, otherwise it will affect the normal operation and service life of the machine and the loss of raw materials. 3. For the first test run, place the indicator needle controlled by the pressure regulator on the 6th, pour the powder into the bucket, turn the test wheel by hand, adjust the filling and pressure, and gradually increase the weight and hardness of the tablet. Finished product requirements, then start the motor, then open the clutch, for the official operation of production, in the production process, the quality of the tablet must be checked regularly, whether it meets the requirements, if necessary, adjust. 4, the choice of speed has a direct impact on the life of the machine. Because the nature of the raw material viscosity and the size and pressure of the material can not be uniformly defined in use, the structure of the machine is a stepless speed change device, which is suitable for suppressing minerals at a slow speed. Plant grass, large diameter, viscosity difference, etc. and materials that are difficult to form quickly. Fast for press bonding, good slip and easy to mold materials. Therefore, the user must be determined according to the actual situation. 5. The management personnel must be familiar with the technical performance of the machine, the internal structure, the use principle of the control mechanism and the work place during the operation, to prevent damage to the machine parts, so as to ensure safe production. 6, in the use should always pay attention to whether the machine sound is normal, in case of screams and strange sounds to stop the inspection to eliminate, do not use barely. Leisuwash specializing in manufacture Automatic Car Wash Machine, Touchless Car Wash , automatic touchless car wash, Touchless Car Wash Equipment, robot car wash, smart car wash system, Leisuwash 360 , Leisuwash Leibao 360 , laserwash 360, leisuwash Touchless Car Wash Machine, Leisu Wash touchless car wash automatic, leisu wash 360 high pressure touchless car wash equipment, robo car wash, touch free car wash, leisuwash 360 touch free car wash, leisuwash 360 price, automatic car wash price, leisuwash in malaysia, no touch automatic Car Wash Machine .
Leisuwash 360 touchless car wash machine high intelligent high quality, with car wash + car care + drying process totally, each car wash takes time 1 minute to 5 minutes which depends on the car wash mode.
Automatic Car Wash Equipment more and more popular in car wash business market, as can save employee fees and wash time mostly, bring investor much more benefit profit return. That's why choose the automatic car washing system. Automatic Car Wash Machine Hangzhou Leisu Cleaning Equipment Co.,Ltd , https://www.leisuwashtouchless.com