• Model NO.: CS1070T
  • Pressure: High Pressure Mechanical Seals
  • Temperature: Temperature Mechanical Seal
  • Standard: Standard, Nonstandard
  • Balance: Balanced
  • Working Temperature: 200deg
  • Recovery: >40%
  • Trademark: ClingSeal
  • Specification: 500*1000-1500*1500
  • HS Code: 8484100000
  • Structure: Single End
  • Speed: General Speed Mechanical Seal
  • Performance: High Pressure
  • Type: CS1070t
  • Density: 2.1-2.2g/cm3
  • Compressibility: 8-18%
  • Thickness: 1.0-3.0mm
  • Transport Package: Ply-Woode Case
  • Origin: China
1/16

From this page you can purchase reinforced non asbestos sheets from 1.0 to 3mm thickness. Remember that as a general rule you should select the thinnest material possible for your application.General Properties of non asbestos gasket sheet is made from two sides non asbestos beater sheet with 0.2-0.25mm perforated metal insert. It generally used in high temperature and high pressure environments, and commonly finds applications in steam cycling or exhaust applications.If you can't find what you're looking for, of require a bespoke material, please do not hesitate to contact us.Is reinforced non asbestos gasket sheet the Best Material for My Application? If you are unsure as to which material is best for your application then you can consult our gasket material selector, or our guide to rubbers. Material specifications can be downloaded from the link on the left of this page.Alternatively, we are always happy to offer technical help and advice and so if you require assistance then please do not hesitate to contact us.

Product Formation:

It made from two sides non asbestos beater sheet with perforated metal insert. Metal usual be 0.2-0.25mm carbon steel, called tinplate. It also can be ss201, 304,316.

Product Features:

·Good adaptability and durability, good sealing, no delamination, high yield

·An economical sealing gasket and exhaust, manifold gasket material

·Good oil-resistance. Notice: Can't suitable for water

·Proved by ISO9001 UKAS,100% no asbestos

Product  Application:

It suitable for oil sealing and gasket, cylinder head gasket

Product Size:

Thickness-------1.0-6.0mm Notice: While thicker, it can be 3+2 type(Product section from top to bottom in order are Paper-Metal-Paper-Metal-Paper) and Multi paper bonding technology

Size---500*500mm;500*1000mm;500*1500mm;1000*1000mm;1000*1500mm

Size can be customized by clients.

Physical Property:

Item 

 

 

Compressibility 

%

8-18

Recovery 

%

≥40

Tensile Strength 

MPa

≥30

150ºC,At IRM903# for 5hours

Weight Increase

%

≤10

Thickness Increase

%

≤15

At 21ºC~30ºC,ASTM B Fuel for 5hours

Weight Increase

%

≤10

Thickness Increase

%

≤15

Product Technical Details
As a general rule, non asbestos gasket sheet is:
• Good for use with oil
• Good ozone resistance
• Good with natural gas

Customer Service
We are happy to answer any questions that you might have about this product. Please contact us for more information.

Product Shows1/16


About Us

Cling-Seal Manufacturing co.Ltd. is a factory of manufacturing & export various gasket material and exhaust gasket in China. We have been sold our products for 12 years in China market, and 9 years in global market. We have more than 12 years experience in producing deferrent reinforced seal gasket paper.

  Ours main products are non-asbestos reinforced sheet, graphite reinforced sheet, double steel non asbestos (graphite) composite sheet, high quality reinforced perforated metal cylinder head gasket materials, flexible graphite gasket materials, compressed sheet jointing gasket materials, gasket filler materials etc. It is easy to cut gaskets at very cheap prices for a wide range of industries. Inserted metal could be tinplate or stainless steel. Thickness of tinplate is 0.18mm to 0.25mm. Thickness of stainless steel is 0.10mm (SS304,SS316),0.15mm (SS201). 

  All of our products are extensively applied in petroleum, chemical industry, electrical power, metallurgy, automobiles, motorcycle, ship building, food, paper, mining, steel and pharmacy etc. which help user to solve the leak problem, now our products have been sold to Europe, Japan, South Korea, Taiwan, Singapore, South America, Middle-East and Africa etc. many countries and regions.
1/16

Pulse Solenoid Valve
The pulse signal is input into the coil of the solenoid valve through the wire, and the pulse valve is controlled by the output signal of the pulse injection control instrument. The pressure change of the two gas chambers of the front and back of the valve can make the deformation of the rubber diaphragm open and close the pulse valve. The diameter of the rubber diaphragm determines the size of the rubber diaphragm and the speed of opening and closing. The larger the diameter of the diaphragm, the larger the stroke and the better the injection performance.
Definition:
The pulse solenoid valve is also called the diaphragm valve. It is the "switch" of the compressed air in the dust cleaning and blowing system of the pulse bag type Dust Collector. It is controlled by the output signal of the pulse injection control instrument, and blows the dust in the filter bag (room), so that the resistance of the dust collector is kept within the set range, so as to ensure the handling capacity and the dust collecting efficiency of the dust collector.
Working principle:
The coil of the solenoid valve is input into the forward pulse signal through the wire, and the working flux generated by the coil causes the moving core to pull in and open the valve. When the forward pulse signal is stopped, the moving core is released, the moving core is returned to the initial state under the effect of spring force, and the valve is also kept in the form of self holding, and it can be kept after the forward pulse or power break, and the negative pulse signal is needed to reset. The principle of the pulse solenoid valve is to use the pulse of the electrical apparatus. The impulse is transformed into a mechanical pulsation, which makes the strong energy of the pulsating gas become momentum, and produces a huge force in a short time. The interval of the pulse is controlled by PLC to be determined according to the recovery time of the rated gas pressure, L.
Use:
Usually installed in the main oil road or the shock absorber back pressure oil road, the oil pressure drops when the transmission is automatically raised and lowered, or when the lock stop and the lock stop are started, in order to reduce the shift and lock the unlocking impact and make the vehicle run more balanced.
Its function is to control the oil pressure in the oil road.
Effect:
It is to control the size of oil pressure in the oil road. It is usually installed in the main oil road or the back pressure oil road of the shock absorber to reduce the oil pressure shock when the shift and lock are unlocked, so that the operation of the equipment is kept stable.
According to the angle of valve inlet and outlet and the form of air inlet, it can be divided into three types.
1. right angle electromagnetic pulse valve: the diaphragm valve is directly controlled by electrical signals at the right angle of the inlet and outlet of the valve body.
2. straight through electromagnetic pulse valve: diaphragm valve is directly controlled by electrical signals at 180 degrees of inlet and outlet of valve body.
3. Submerged Electromagnetic Pulse Valve: diaphragm valve which is directly submerged by the valve inlet and is directly controlled by electrical signals.

Pulse Solenoid Valve

Pulse Solenoid Valve,Submerged Electromagnetic Pulse Valve,2 Inch Pulse Solenoid Valve,Rectangular Pulse Solenoid Valve

Botou Youjian Environmental Protection Equipment Co. LTD. , http://www.btdustmachine.com