-
Model NO.: Z41H
-
Material: Carbon Steel
-
Pressure: Ordinary Pressure
-
Seal Surface: Wedge Gate Valve
-
Usage: Flow Control
-
Application: Industrial Usage, Water Industrial Usage
-
Class: 150lb to 2500lb
-
Application Fields: Metallurgy,Light Industrial,Electric Power,Petroch
-
Trademark: NAIBANG
-
Specification: API, ANSI, DIN, Bs, JIS
-
HS Code: 8481804090
-
Type: Straight-through
-
Connection Form: Flange
-
Actuator: Manual
-
Thread Position of Valve Rod: Outside Gate Valve
-
Standard: ANSI
-
Size: 1/2" to 36"
-
Certificates: API 6D, Ce, ISO9001
-
Delivery Detail: 20~45 Days According to The Specific Quantities
-
Transport Package: Standard Export Wooden Case
-
Origin: China
Pressure Seal Gate ValveMain Features:
The pressure seal valves are designed for service of high temperature and high pressure and are widely used in fossil fuel power plant. Compared with bolted bonnet joint valves,
it provides absolute reliable sealing of the bonnet joint, so that the pressure seal valves are more compact and rigid as well as maintenance cost-effective at high temperature and high pressure service.
This kind of gate valve is not only characterized as simple structure and reliable usage, but also able to create slight flexible deformation to compensate the deviation of the sealing face angle generated during processing, thus improving the process performance. In addition, at seat and gate disc seal surface are over-lay with iron-base alloy or Co-base alloy or carbide alloy for long duration.
Main Parameter Specification
Design and Manufacture:Cast Steel Gate Valve to API 600(ISO 10434),API 6D;Cast Stainless Steel Gate Valve to API 603,API 600
Inspection and Test:API598,API600 or API 6D
End Flange Dimension:ASME B16.5(for NPS≤24,ASME B 16.47 series B,API 605,ASME B16.47 A Series,MSS SP-44(for NPS>24)
BW end Dimension:ASME B16.25
Face to Face and End to End:ASME B16.10
Pressure-temperature ratings:ASME B16.34
Product Range
Body material: carbon steel, stainless steel, alloy steel
Nominal diameter:2"~36"(DN50~DN900)
End Connection: RF,RTJ, BW
Pressure range: Class150~2500(PN16~PN420)
Working temperature:-29ºC~+560ºC
Operation: Hand wheel,Gear,Electric Actuator,etc.PRODUCTS
 WORKSHOP
INSECTION
We welcome all the world customers to contact us for more cooperation.
With our years of technical knowledge and experience, we assure you,
Naibang will be one of your best parters in China.
Â
| Specifications |
| Applicable Standards |
 |
| Design |
ASME B16.34, API6D |
| Fire safe |
APIÂ 607Â |
| Anti static |
API 608, API6D |
| Face to face |
ASME B16.10, API6D |
| Welding ends |
ASMEÂ B16.25 |
| Inspection and test |
API 598, API 6D  |
Dock Ramp
stationary adjustable loading dock leveler ramp main role is a bridge between the cargo table and transport vehicles, makes forklift load and unload quickly .One end of the dock ramp is as high as the cargo table; the other side is on the rear edge of vehicle. it can automatically adjust height according to different car models and wagon box change in the process of loading and unloading.
There are stationary hydraulic dock leveler, dock leveler, stationary Loading Dock Ramps, dock leveler ramp, mobile dock ramp yard ramp,hydraulic loading ramp
Features
System: The free maintenance designing for the long run
Safety: Structural safety legs provide supporting and below-dock loading. 10 Amp motor, hydraulic pump, Motor-runs off 220V single-phase electrical outlet
Structure:50,000 PSI high-tensile steel deck;
lip assembly depending on selected dock levler capacity;
Integral maintenance struck for deck spporting;
lip extension extends lip at full height;
clean-frame design for easy clean-up,maintenance and inspction;
Operation:push-botton desinging for operating
Working range:-250MM to + 300 MM; -300MM to +450 MM
Capacity: 25000LBS to 35000LBS
Size: 6''x8'';7''x8'',6.5''x8'';6.5''x8''(Ft.)
|
Dimensions and specifications
|
|
Length mm
|
2000/2500 /3000/3500/4500 mm
|
|
Width mm
|
1800/2000/2200 mm
|
|
Operating range mm
|
up
|
304 365 425
|
|
down
|
300 300 300
|
|
Thickness of the top sheet on the platform cover
|
Standard* 8/(0,8-2,4)* mm
|
|
Thickness of the lip
|
16mm
|
|
Color**
|
Blue RAL 5005
|
|
Number of lift cylinders
|
Standard
|
1
|
|
on request
|
2
|
|
* In the brackets is the height of the embossing.
|
|
** stoven baking, pre-treated in shot blasting chamber.
|
|
Technical specifications
|
|
Load capacity
|
6000 kg (60 kN)/10000 kg (100 kN)
|
|
Maximum point load
|
top sheet 8 mm
|
6,5 N/mm²
|
|
Motor hydraulic unit
|
1.1KW
|
|
Supply voltage
|
380V,3 phases
|
|
Control voltage
|
24V
|
|
Control unit protection class
|
IP54
|
|
Working fluid
|
Mobil DTE10 EXCEL
|
|
Class of surface cleaning before painting
|
Sa2
|
|
Thickness of painted layer
|
60-90μm
|
|
Operating temperature
|
-30 -- +50℃
|
|
Configuration and accessories
|
|
|
Standard
|
Optional
|
|
Mounting type
|
Embedded/suspended
|
Other upon request
|
|
Colour
|
Signal blue (RAL 5005)
|
Other upon request
|
|
Lip
|
Length - 400 mm
|
Length - 500 mm, segmented lip, tappered lip
|
|
Hydraulic system
|
1 lift cylinder, 1 control cylinder
|
2 lift cylinders, low temperature oil –50°C
|
|
Seal
|
PVC-seal or brush along perimeter
|
|
Heat insulation
|
Polyurethane foam insulation under upper deck
|
Detailed image
Components
Application
Other dock level ramp
Dock Ramp
Dock Ramp,Loading Dock Ramps,Portable Loading Dock Ramps,Loading Dock Ramps For Sale
Jiangxi Mide Industrial Co., Ltd. , https://www.midecrane.com