The bearing body machine and the thrust bearing are made of brass, and the bushing is made of TSQ-A, which can avoid the accidental friction with the main shaft and burn out. Each radial bearing is supplied by two rows of small holes with a hole diameter of 0.35 mm; the thrust bearing adopts a ring-shaped air supply form of the air bag groove, and has 16 air supply holes of 0.35 mm.

The requirements for bearing gas are: (1) clean. (2) The pressure above 0.4 MPa can be maintained for a period of time after the intake valve is closed. The pipelines matched with the bearings of the machine should be subjected to strict cleaning and purging. The pipelines matched with the organization of the machine are equipped with a nickel sheet fine filter, which can effectively prevent the mechanical impurities of the card machine from entering the bearing interior.

Since the air bearing expander is lubricated with air, the rotor speed can reach 60,000 rpm, which greatly increases the cooling capacity and shortens the oxygen production time. At the same time, it is effective in preventing the contamination of the working medium and safely operating the equipment. of.

The air bearing turbo expander not only facilitates operation, reduces maintenance, but also prolongs the life cycle of the whole unit, shortens the oxygen production time, improves the oxygen production, saves a lot of energy, and saves the total value of the whole year. Ten thousand yuan.

(Finish)

Our company advantages:

1. we are honest and reliable, and we hope we could be long-term partners.

2. We are professional, because there are a good team of engineers and designers in our factory.

3. We always stick to provide our customers high quality goods, best service, and sincere attitude to all our business partners.

4. We will guide every customer that how does our machine works, and welcome you come to visit our factory.


Technical Parameters:

1. Weight: 1500kg

2. Planting method: Round wire

3. Production speed: 500 rpm

4. Planting peak: 65mm

5. Planting pore size: φ1.6-φ4.0

6. Storable procedures: 1000 models

7. X-axis travel: 400mm;

8. Y-axis travel: 320mm;

9. Z-axis travel: 160mm;

10. Air input pressure: 0.8MPa

11. Rated voltage frequency single phase: 220V, 50Hz

12. Machine power: 2.0kw

13. Machine dimensions: 1.14 meters long, 1.84 meters wide and 1.75 meters high

14. Packing size: 1.8 meters length, 2.1 meters width, 2.1 meters height (conforming to standard container requirements).


More details, please contact us as soon as possible.

5 Axes 3 Heads Drill And Tuft Brush Machine

5 Axis 3 Heads Brush Machine,Brush Drilling And Tufting Machine,Drilling and Tufting Super Brush Machine,Broom Brush Tufting Making Machine

Yangzhou Blue State Digital Control Brush Equipment Co., LTD. , http://www.lbbrushmachine.com