We can often see it running heavyweight goods for people on the street. It seems like the Sun Wukong is the same as the Sun Wukong. The name of this Hercules is called. We come under simple science. It is a kind of equipment that can lift, rotate and lift the goods by hydraulic lifting and telescopic system. Usually it can be seen to be assembled on the truck. The total components are: truck chassis, cargo box, power take-off, crane. Therefore, we also take it as usual: Hang with the car. However, there are many local customs will be called car cranes, self-cranes and so on. In short, it is a car that can be used to hang goods. Many people will certainly want to know how the truck crane works. After all, it can replace the power that people can't give. How does it work? Mainly through the hydraulic transmission principle to achieve a variety of mechanical actions. A lot of commonly used is the power of the car, through the power taker to drive the hydraulic oil pump, connect the hydraulic valve to achieve work. Of course, if there is no car power, we can only provide the power source through the pump motor unit. The pump motor unit is driven by the 380V voltage to drive the motor in the field, in docks, ships, workshops and other vehicles without the power of the vehicle . The troublesome use of an oil pump motor unit is that it requires the generator to generate electricity before it can work, and the motor is used to drive the pump. At present, the truck-mounted cranes in our country are mainly in the form of rack rotation and slewing ring. The two main differences between them are that rack rotation is the crane's cylinder driving the rack movement to rotate the column. We all know that the rack is a straight line, so after it has been rotated to a certain position, it cannot move forward. Therefore, the rack rotation has a range. According to the truck crane described above, do you know a lot about the basics, at least not wanting to be intimidated when you want to operate the truck crane in the future? MORGAN series steel rolling guide is a kind of equipment used in the steel rolling process, it helps to guide and control the rolling direction and position of steel in the rolling mill. This equipment usually consists of a set of rolling guide wheels that can be adjusted as needed to ensure the correct position and orientation of the steel in the rolling mill. Morgan Series Rolling Guide,Cast Steel Guide Plate Non-Standard Customization,Various Series Of Rolling Equipment Guides,Steel Rolling Equipment Rolling Guide Accessories JINGJIANG EASTSUN METALLURGICAL MECHANICS CO.,LTD , https://www.jesguide.com
MORGAN series rolled steel rolling guides have the following features and advantages:
1. High precision: The guide wheel adopts high-precision bearings and transmission devices to ensure the smooth and accurate movement of the guide wheel, thereby improving the rolling accuracy of steel.
2. Wear-resistant and durable: The surface of the guide wheel has been specially treated, which has good wear-resistant performance, and can be used for a long time without damage during high-speed rolling.
3. Flexible adjustment: The guide wheel can be adjusted according to different rolling requirements, including adjusting the position, angle and spacing of the guide wheel to suit steel products of different sizes and shapes.
4. High efficiency: The design and movement of the guide wheel can minimize the sliding and deflection of the steel, and improve the rolling efficiency and output.
5. Safe and reliable: The guide wheel is equipped with a safety protection device, which can prevent the steel from falling off the guide wheel or the guide wheel fails, ensuring the safety of operators and equipment.
In a word, MORGAN series steel rolling guide is a key equipment, which can effectively guide and control the rolling of steel in the rolling mill, improve rolling precision and efficiency, and ensure the quality and safety of steel.