Gravity Separator
Introduction
The product processed by the gravity separator is
separated into layers of different specific weight according to the [fluid bed"
principle. For the grading by specific weight of products with very slight
differences in size and/or weight, which cannot be separated by screening
(width), aspiration (weight) or by indented cylinders (length), so the
materials after processing they will have the optimal physical quality and
strongest germinating power. The separator effectively removes partially eaten,
immature and broken seeds to ensure maximum quality of the final product which
consume the most time of masses. They may be used to separate and standardize
coffee, peanuts, corn, peas, rice, wheat, sesame and other food grains.
These Gravity Separators have a rectangular shaped
deck so that the product travels a longer distance resulting in cleaner
separation of light and heavy particles and the lowest percentage of middlings.
The processing of the Gravity Separator is accurate and smooth where the
product flows over the vibrating deck in which pressurized air is forced
through causing the material to stratify according to its specific weight. In
which, the heavier particles travel to the higher level and the lighter
particles travel to the lower level of the deck.
To accomplish the goal of managing efficient
separation by specific weight, this is necessary that the pressurized air
supply needs to be accurately adjusted by having individually adjustable air
fans to control the volume of air distribution at different areas of the
vibrating deck. And to make sure the functioning, the table inclination, speed
of eccentric motion and the feed rate can be precisely adjusted with ease and
minimum of operator training.
With backing from our skilled group of experts, we
have the capacity offer a premium quality Gravity Separator for Agriculture
Industry which comes pressed with an elite set of peculiarities. The offered
gravity separator is reachable in various details to pick. This gravity
separator is fabricated from the best material as per the business guidelines.
Our gravity separator is tried by quality masters on different parameters to
make certain the faultlessness.
Model No.
Capacity
(T/H)
Power(kw)
Weight(kg)
Sieve Size(mm)
Dimensions(mm)
5XZ-3
Gravity separator
3
7.45
1300
2250×1150
2600×1500×2100
5XZ-6
Gravity separator
5
8.95
2000
3000×1200
3440×1630×1900
5XZ-10
Gravity separator
10
15
2500
3900×1550
4300×1960×2500
5XZ-3A
Gravity Separator
3
5
1200
2000×325
4000×1800×2750
5XZ-5A
Gravity Separator
5
9.75
1600
2000×475
4000×1900×3100
5XZ-3B Gravity Separator
3
4.25
1100
2000×325
4000×1800×2900
5XZ-5B Gravity Separator
5
9
1550
2000×625
4000×2050×3100
5XZ-10B Gravity Separator
10
17.3
2150
2000×1250
3800×2100×2600
Gravity Separator,Specific Gravity Separator,Grain Separator,Seed Separator Machine SHIJIAZHUANG SYNMEC INTERNATIONAL TRADING LIMITED , https://www.seedgraincleaner.com
Take a two-layer plastic locker as an example, you need tools: rubber hammer
The first step: the base to give up side by side, insert single and double side plates, the board has marked down, forward, the direction must not be wrong, with a rubber hammer hit back in place.
Part 2: Insert the alignment plate into the backplane.
The third part: install the connector, first snap the connector onto the side board, pay attention to the up and down direction, and knock the connector forward.
Part 4: Refer to step 1 to install the single and double side plates and then install the top plate. The top plate is knocked into place by the back.
Step 5: Install door panels, multi-function boxes, top seals and other accessories. This step is very simple. After installation, the effect is as shown below.
How is the plastic locker installed?