1. The valve path must be blocked at both ends, there is dry and ventilated room. Such as long-term storage, should always check anti-corrosion. 2. The valve should be clean before installation and eliminate the defects caused during transportation. 3. Installation must be carefully checked on the valve signs and nameplate meets the requirements. 4. The valve installed in the horizontal pipe, valve cover up.

Tower Crane Telescoping Hydraulic System

Tower Crane telescoping hydraulic system is the important system used for tower crane Mast Section telescoping. It includes the telescoping cage, telescoping yoke, cylinder, and Hydraulic Pump Station.

The main components of hydraulic system of tower crane are hydraulic cylinder, control element, oil pipe and pipe joint, oil tank and hydraulic oil filter, etc.
The hydraulic pump and the hydraulic motor are the most complex parts of the hydraulic system.
The hydraulic pump inhales the oil and transpotrs it through pipes to the hydraulic cylinder or the hydraulic motor, so that the cylinder or the motor can operate normally.

Hydraulic Pump Station,Telescoping Cage,Telescoping Yoke,Tower Crane Cylinder,Axial Plunger Pump

SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.bq-cranes.com