Concrete mixer truck operation and use procedures 1) Inspection must be performed before operation to ensure that the steering, braking, lighting, and signal systems are sensitive and effective. No cracks and serious damage are caused to the drums and chutes of the mixer truck. The blades are worn within the normal range, and the U between the chassis and the subframe is The bolts are well connected. 2) Understand construction requirements and site conditions. Select driving directions and parking locations. 3) Driving on social roads must obey the traffic rules. The turning radius should meet the requirements of the instruction manual, and the speed should not exceed 15 km/h. The speed of entering the station shall not exceed 5km. 4) It is forbidden to touch the rotating rollers and rollers by hand. 5) When reversing the unloading, it must obey the command, pay attention to the surrounding personnel, and immediately stop the vehicle if any abnormality is found. 6) It is forbidden to perform cleaning under the high voltage line. Concrete mixer truck loading and maintenance procedures 1. During the running-in of new equipment, please do not load it at full capacity. It is recommended that 70%-80% of the loading capacity be loaded and the running-in period should be 3000km. 2. Before switching between positive and negative rotations, the operating handle must be returned to the neutral stop position, that is, the can body stops rotating and then changes direction, otherwise the reducer may be seriously damaged. Third, in the high-speed or full-load climbing, the tank should stop turning to ensure traffic safety. Fourth, all the connection screws should be regularly checked and fastened; all the lubrication points must be regularly filled with lubricating oil, regular inspections to replace the hydraulic oil, gear oil. 5. It is not advisable for the vehicle to load a slug with a slump of less than 12cm. Do not load a slug with a slump of less than 10cm. 6. Clean the inside and outside of the tank and keep the tank clean. Seven, other maintenance details, please follow the "user's manual" implementation. The scientific name of the PVC material of the inflatable product is polyvinyl chloride, abbreviated as PVC. The inflatable castle is a large inflatable toy for children. The materials generally used in children's Inflatable Toys are high-polymer fiber double-layer weaving and PVC coating. This is a high-strength air-tight cloth or PVC air-tight cloth with a mesh. The thickness of the cloth is generally: 0.45-0.8 mm.
5. High temperature and low temperature resistance, can be used at minus 28 degrees and high temperature above 30 degrees.
Pvc Material,Pvc Film,Pvc Film Roll, Rigid Pvc P&D Plastic Manufacture Co., Ltd , https://www.jmInflatableboat.com
The characteristics of this material are:
1. It has strong tensile force and strong tear resistance.
2. Strong anti-fouling ability, the surface can be kept clean for a long time and easy to clean.
3. Strong anti-fracture ability, the surface is not easy to open glue.
4, and strong anti-corrosion, not easy to oxidize.
