Torque Torque is the force that rotates an object. The engine torque refers to the torque output from the crankshaft side of the engine. In the condition of fixed power, it is inversely proportional to the engine speed. The faster the speed, the smaller the torque, and vice versa, it reflects the load capacity of the car within a certain range. On some occasions, it can truly reflect the "natural" color of the car. For example, when starting or when driving in the mountains, the higher the torque, the better the car's response. Compared with the same type of engine cars, the larger the torque output, the greater the carrying capacity, the better the acceleration performance, the stronger the climbing ability, and the less the number of shifts, the less the wear on the car. Especially when the car is started at zero speed, it also shows the superiority of the high torque increase speed. The engine torque is expressed in Nm. As with the power, the maximum output torque of the engine is generally indicated at the same time as the rotational speed per minute (r/min). The maximum torque generally occurs in the middle and low speed range of the engine. As the speed increases, the torque will drop instead. For Tube&Sheet With Safety Cover The laser beam can easily be programmed to precision cut a diverse range of thicknesses and materials (e.g. metals (including reflective metals such as copper, silver and aluminium) – brass, tungsten, steel, pewter and titanium etc.), gemstones (e.g. diamonds), ceramics, graphic composites, silicon and many types of plastics. Laser Cutting With Safety Cover,Laser Pipe Cutting,Laser Cutting Metal Machine,Optical Fiber Laser Cutting Machine JINAN XUANLIN MACHINERY CO., LTD. , https://www.jinanmachinery.com
Even the most complex, awkward and intricate of shapes can be accurately cut through a Fiber Laser as the user has total control over the beam intensity, duration and heat input. Laser cutting has some similarities to other laser-based processes such as engraving and drilling, which also use a focused laser beam to effectively make designed cuts into a material.