What problems should be paid attention to when using and maintaining the flotation machine?

Black flotation machine is suitable for non-ferrous metal sorting, but also for non-metallic such as: coal fluorite, talc sorting. The flotation machine drives the impeller to rotate by the motor triangle generation, and generates centrifugal force to form a negative pressure. On the one hand, the air is mixed with the slurry, and on the other hand, the slurry is mixed with the medicine, and the foam is refined to make the mineral bond foam. , floating to the pulp surface to form mineralized foam. Adjust the height of the shutter and control the liquid level so that the useful foam is scraped off by the scraper.

The flotation machine is the most commonly used method for beneficiation . Generally, the material is crushed to the separation degree of the crystal body by the crusher ball mill and other equipment, and then selected by a flotation machine and the like.

What problems should be paid attention to when using and maintaining the flotation machine:

1. The working capacity and working period of the flotation machine are the same as those of other machines. The maintenance and maintenance of the main parts are normal. All the working parts should be carefully checked in 3-4 months, and the new flotation Regular inspections of the machine for the first few months of work;

2. Only qualified personnel can carry out inspections;

3. In order to replace the wearing parts in time to shorten the downtime, it is necessary to regularly reserve a full set of wearing parts in the warehouse to determine the date of use and the organization such as reserve amount according to the specific conditions.

4, must ensure that the operator of the flotation machine has a certain technical know or training to force him to fully understand the machine.

5. In order to avoid the mixing of waste and useless materials into the oil, there should be a filter when filling the oil. When the flotation machine is working, the oil cover should be sealed.

6, after driving to check, and contact with the upper and lower process can be started.

7. The order of driving is: press the upper switch and press the start button.

8. After driving, strictly touch the rotating part with your hand.

Graphited Packing