Since the lithium battery has significant performance advantages, in recent years, the proportion of lithium in the battery industry to continue to improve. According to relevant statistics, China's lithium battery production in the first half of 2016 was 28.15GWH, an increase of 30.5%. Looking forward to the second half of the year, the demand for lithium-ion power batteries will continue to grow rapidly. It is expected that the annual output of lithium batteries will reach 62.34GWH. The proportion of China's power lithium batteries will be expected to exceed the 3C battery as the largest application. It is expected that China's lithium ion will be 2018. The battery market will reach 102.68GWH and will grow by 25% in the next three years. The lithium battery market is very broad, with high added value, and electrode materials account for more than 70% of the cost, which determines the performance of lithium batteries. The main equipment for the production of lithium battery materials: mixing equipment, calcining equipment, crushing equipment, packaging equipment and testing equipment, the process is as follows: The crushing and grading equipment is at the end of the process, which has a great influence on the performance of the final product. Therefore, the processing of the electrode material is an important link. Because the price of the positive electrode material of the battery is very high, if the crushed product is unqualified or over-pulverized, the yield rate It will be greatly reduced, and the loss will be very large. Therefore, whether the product produced by the crushing equipment can reach a narrow particle size, no over-grinding and large particles, and the requirement of low fine powder rate is particularly important! The pulverization of the electrode material can be carried out using a number of pulverizing equipment such as a grinder, a pin-type sand mill, a jet mill, and the like. Among them, the airflow pulverizing equipment, the airflow pulverizing equipment has large production capacity, high degree of automation, fine product size, narrow particle size distribution, high purity, high activity, good dispersibility, etc., which fully meet the requirements for preparation of electrode materials, and thus are widely used. application. So what are the manufacturers of airflow smashing equipment? The editor has carefully organized it and it is listed below: Potassium Formate,Ammonium Formate,Calcium Formate,Powder Calcium Formate Jiangsu Kolod Food Ingredients Co., Ltd. , https://www.kolodchem.com