Chrome iron slag treatment process Description: The ferrochrome slag treatment process in a gravity separation method for recovering from ferrochromium slag chromite alloys, the use of two sorting jig, respectively ferrochrome coarse and fine particles, so that the recovery benefit ferrochrome maximize. First, the large chromite ore slag is broken into small pieces by a coarse jaw crusher , and the small piece of chromite ore slag enters the fine jaw crusher for fine breaking, so that the final particle size is controlled within 30 mm, and then enters the silo, below the silo. Electromagnetic vibrating feeder is set, and the crushed ferrochrome slag is evenly fed into the AM30 jig for coarse jigging sorting to obtain coarse ferrochrome and tailings. The tailings are embedded with fine chrome For ferroalloys, the AM30 jig tailings should be ground by a rod mill to obtain sand-like chromite ore slag. The LTA1010/2 jig is subjected to secondary jigging to obtain fine-grained ferrochrome and waste. The process has a total recovery rate of more than 90% for ferrochrome alloy, and is a process for recycling and recycling ferrochrome slag widely used in China. List of ferrochrome treatment equipment configuration: After the ferrochrome alloy has been recovered, the ferrochrome content in the ferrochrome is extremely low, and it is in the form of fine granules. It can be sold again to cement plants, new building materials factories and other enterprises to make new building materials. The whole process has realized the solid waste of chrome iron slag. The entire recycling, not only reduces the waste of useful resources, but also reduces the occupation of land by solid waste residue, the harm to the environment and human health. I plant has a wealth of experience and unique insights disposal and recycling slag ferrochrome, ferronickel slag, stainless steel slag, slag silicon manganese and other metals smelting slag, welcome customers and friends to visit our factory to discuss.
Hydraulic Valve Contain Main Control Valve, Pilot Valve on Pump, Relief Valve on Control Valve and Solenoid Valve.
Fuction:
(1) when the single boom is lifted, the two pumps supply oil together to improve the lifting speed of the boom. (only when the boom is raised)
(2) when the bucket rod moves separately, the two pumps supply oil to the platform and speed up the action speed of the bucket.
(3) the boom is preferred. When the boom and other actions are carried out at the same time, the action of the boom will be given priority.
(4) priority is given to rotation, and when rotary and bucket move simultaneously, gyration will be given priority.
(5) Negative flow control, to provide a negative flow signal to the main pump, so that the valve stem in the middle, the main pump displacement becomes minimum.
(6) Walking in a straight line, when the excavator is moving forward or backward, other actions can be taken at the same time to ensure the needs of special working conditions.
(7) electrical sensors can be configured to meet the needs of electronic control.
Hydraulic Valve,Hydraulic Control Valve,Hydraulic Solenoid Valve,Hydraulic Check Valve Jining Tongderui Construction Machinery Co., Ltd. , https://www.tdr-excavatorparts.com name model Power (KW) amount) Crude jaw crusher PE400*600 30 1 Fine jaw crusher PEF250*1000 37 1 Jig AM30 3 1 LTA1010/2 3 1 Rod mill Φ1200*4500 55 1 Conveyor Model 600 5.5 —— feeding machine GZ3 0.35 1 Silo 20m3 —— 1
