Optical Components and Accessories, including a wide selection of Laser Diode , Laser Crystal, Optical Lenses, Optical Filters, Optical Mirrors, Windows, Prisms, Beam splitters, Beam combiner, Beam expander, Temperature controlled Heatsink , etc.. They are integrated into a limitless number of applications, such as microscopy, imaging, or interferometry for industries ranging from the life sciences to testing and measurement.
405-1550 nm, output power up to 250 W.
Precision optical components.
Optical fiber from visible to near IR.
2 to 5 wavelengths combiner.
Variable Attenuator
Laser Components,Blue Laser Goggles,Cheap Laser Printer,Articulated Arm Series Changchun New Industries Optoelectronics Technology Co., Ltd. , https://www.cnioptics.com
Laser Diode
Laser Optics
Free space laser diodes
Fiber Coupled Laser diodes module
Laser crystal
Frequency doubling crystal
Lens and Filter
Fiber Coupler & Fiber & Fiber Optic Collimator
Line Generator
Fiber coupler
Multi-mode/ Single-mode fiber
Fiber optic collimator
Powel lens is available with fan angles of 5°, 7°, 10°, 30°, 45°, 60°, 75° 90° and 100°
Fiber Beam Combiner
Beam Combiner
Combines up to 4 fibers into 1 beam.
(single mode or multimode optional)
Multi-combiner
Polarization beam splitter/combiner
Multi-function Optical System
Beam Expander
Complete solution of optical system with multi-function.
Expansion ratio of 2X, 3X, 5X, 10X beam expanders.
AOM & Shutter
Heatsink
AOM (Acousto-optic modulator) with repetition rate up to 1MHz.
Shutter with minimum exposure as low as to 5ms.
It can provide a constant temperature for laser to make the laser more stable
LCD Electronic Timer Multi-pulse Generator
Multi-pulse Generator
Used for cumulatively recording the working time (life time) of lasers. Cumulative time deviation ≤0.02%
Generate pulse signal, high and low electronic level 0-10000/ms variable.
Articulated Arm
Used in conjunction with various types of CO2, YAG, and other wavelengths Laser Systems as a means of delivering the laser energy from the laser launch to the process point.
Circular and square attenuators which can vary the output power from 0.1%-100%.
Laser Safety Protective Housing
Laser safety is the key important thing during laser operation. CNI can offer proper laser goggles that protect from laser damage.
Laser safety is the key important thing during laser operation. CNI can offer laser safety protective housing that protect from laser damage.
Laser Viewing Card
Laser Rangefinder
Hand-held infrared viewers for observation and alignment, wavelengths available from 800 to 1550 nm.
Laser rangefinder has a long lifetime with low power consumption, easy to assemble and use.
Control valves are used to regulate the flow, pressure and level of the medium. According to adjust the position of the signal, the valve automatically control the opening, so as to achieve the media flow, pressure and liquid level adjustment. Regulating valve sub-electric control valve, pneumatic control valve and hydraulic control valve. Regulating valve by the electric actuator or pneumatic actuator and control valve of two parts. Regulated and usually divided into two types of direct-through single-seat and direct two-seat, the latter has the ability to circulate large, uneven and small operation stability characteristics, it is generally particularly suitable for large flow, high pressure drop and leakage less occasions. Flow capacity Cv is one of the main parameters to select the control valve, the control valve flow capacity is defined as: When the control valve is fully open, the pressure drop across the valve is 0.1MPa, the fluid density of 1g / cm3 hourly flow path The number of flow control valve, known as the flow capacity, also known as flow coefficient, in Cv, said t / h, liquid Cv value calculated according to the following formula. According to the size of flow capacity Cv check the table, you can determine the nominal valve DN. Flow characteristics of the control valve, the pressure drop at both ends of the valve to maintain a constant condition, the medium flow through the control valve and the relative flow of its relationship between the opening. Regulating valve flow characteristics of linear characteristics, such as percentage characteristics and parabolic characteristics of three. The significance of the three kinds of fluency features are as follows: (1) Equal Percentage Characteristics (Logarithmic) The relative and relative flow rates of equal percentage characteristics do not have a linear relationship, and the change of the flow rate caused by the unit stroke change at each point of the stroke corresponds to this point Of the traffic is proportional to the percentage of traffic changes are equal. So it has the advantage of small flow, small changes in traffic, traffic flow, the flow changes, that is, in different degrees, with the same regulation accuracy. (2) Linearity (Linearity) Relativeness and linearity of linearity are linear. Changes in unit stroke caused by changes in the flow is unchanged. When the flow rate is large, the relative value of the flow rate changes little, and when the flow rate is small, the relative value of the flow rate changes greatly. (3) Parabolic characteristics The flow rate varies in proportion to the two sides of the travel, and generally has the intermediate characteristics of the linear and equal percentage characteristics. From the analysis of the above three characteristics can be seen, in terms of its regulatory performance, with equal percentage characteristics for the best, stable regulation, good regulation performance. The parabolic characteristics than the linear properties of the regulatory performance is good, according to the different requirements of the occasion, select any one of the flow characteristics.