At present, Taiwan Chain Injection Molding Machinery Co., Ltd. has successfully developed the LF30MT double-cylinder direct-pressure micro plastic injection molding machine, which is characterized by double-cylinder direct-pressure mold reduction, uniform force on the die face, stable and rapid low-pressure closing mode, and adoption Energy-saving oil pump.

According to reports, the machine is a single cylinder injection piston rod, injection molding accuracy, injection speed of 165mm per second, injection pressure of more than 3000kg per square centimeter, and the use of Japan STAR64 bit computer, responsive, simple operation, stable production, is a Tailor-made plastic molding machines for electronics and telecommunication micromolding parts can accurately control the quality of each molded part as long as it is less than 3g.

This equipment is divided into vertical and horizontal structure, used for roughing steel ball blank, high rigidity, The rotation of main shaft and turntable adopt frequency conversion speed regulation;Hydraulic drive pressure, mechanical pressure preservation by compression spring and constant pressure nut locking;Adopt end face bearing with high capacity;The main shaft bearing adopts the mechanical seal structure, which eliminates the hidden danger of the main shaft oil leakage;Horizontal layout, large cycle machining;L type low gravity structure is adopted, and the rotating plate is moving pressurization;Adopt the separate structure of positioning, pressuring and sliding of rolling linear guide rail.The rotation of main shaft and turntable adopt frequency conversion speed regulation;Hydraulic drive pressure, normally open type hydraulic station;

Ball Flashing Machine

Alloy Steel Ball,Ball Flashing Machine,Steel Ball Processing,Horizontal Ball Flashing

Xinxiang Sunrise CNC Bearing Equipment Co., Ltd. , https://www.cncsunrise.com