Working Principle
Chenwei Series Vibration Polishing Machine has a ring chamber to hold media (abrasive stones) and work pieces.When the machine start working,it makes three-D high frequency vibration.This motion makes the media work on surface of work pieces upward &downward;leftward and rightward;frontward and backward.The process is similar to handwork of surface polishing.
The machine structure
Vibratory Polish machine is composed of inertial vibrator, vessel, electrical cabinet and basement.
Polishing Machine Polishing Machine,Car Polishing Machine,Wheel or Polishing Machine,Car Alloy Wheel XINXIANG CHENWEI MACHINERY CO.,LTD , https://www.sieves.nl
1. PIC control
2. Multiple switch protected
3. Blade material Cr12MOV
Descripition of shredder single shaft for plastic
1.The shredder single shaft for plastic with big feeding mouth, it can put the big plastic or rubber product freely.
2.The rotary and cutting blade with edge of special design, it can get very high efficiency and high capacity.
3.The shredder single shaft for plastic is control by PLC system; the blade can rotate inopposite direction and close automatically if something unexpected happens; with very high safety service.
4.The shredder single shaft for plastic runs slowly with low noise and less dusty.
5.The blade material with special alloy steel made, with long life.
Advantages of shredder single shaft for plastic
1. The shredder single shaft for plastic can shred various bulk materials, basket materials, pipe, plate, sheet, tire, big roll film, which are difficult to be shredded by single shaft shredder.
2. The frame is combinational structures, made from precision machined extra-thick sheet, slewing axis is forced, Lange-angle, hexagonal prism, the hopper is large-caliber, and substantial, so good-sized material is practicable.
3. Revolving knife is designed and processed particular in thickness, shape, arrange order and so on.
4. PLC control system, forward and reverse operate and stop automatically can protect the machine when the materials is too big and much. Operate safely, low-speed running, low noise, little dust.
5. The knife is made from special alloy steel, sturdy and durable.
Technical Parameters
Model
Main Power(kw)
Hydraulic Power(kw)
Shredding Diameter(mm)
Shredding Rotor Length(mm)
Rotating&Fixed Blades QTY (PCS)
End Plastic Scrap Size(mm)
PNDS-600A
15-22
2,2
320
600
32+2*2
30-50
PNDS-800A
30-45
3
400
800
38+2*2
30-50
PNDS-1000A
37-55
4
400
1000
58+2*2
30-50
PNDS-1200A
55-90
5.5
400
1200
95+2*3
30-50
PNDS-1500A
75-132
5.5
480
1500
110+2*3
30-50
 
production process
Any question,please call me:
MOB&waspp: +8613773240086
Â
The grinding stones are rolling forward and they are grinding each other during .this makes the work pieces ,polished and clean.
To replace the traditional cloth-wheel polishing, the Vibratory Finishing Machine for Metal Working can save a lot of spending on manpower, and lower the cost of production. It can also be matched up with mass production, improve and stabilize the quality of the products.
Inertial vibrator: This is the vibrating source of the machine, it is composed Of vibratory motor, springs and eccentric blocks.
Vessel: The vessel is welded of annular steel plate. It is lined with high quality wearable Polyurethane, to weaken the noise and the bump of workpieces on vessel. (For CWP series, there is a separator on the vessel to seperate the workpieces from the stones. )
Electrical cabinet: Operate the machine by buttons on the control panel.
Basement: It is weld of steel, and it has springs to hold the vessel
Computerized: Non-Computerized
Certification: Ce, ISO9001, SGS
Production Name: Double Shaft Shrdder Machine
Second Name: Plastic Shredder
Motor Power: 22kw-75kw
Crushing Capacity: 300-400kg/H
Blade Material: SKD-11
Shaft Design: Single Shaft
Bearing: SKF
Motor: Wn
Main Electrical Part: Siemens and Schneider
Trademark: Sino-tech
Transport Package: Wooden Case
Specification: CE, ISO
Origin: Made in China
HS Code: 84778000
Industrial Cardboard/ Home Plastic/ Medical ink cartridge Waste Shredder Machine