Ndfeb Magnets,Formwork Magnets,Rare Earth Magnets,Rare Earth Filter Magnets Anfeng Industrial Co.,Ltd , https://www.afmagnets.com
Type (wet separator)
drum diameter (mm)
drum length (mm)
Magnetic intensity (Gauss)
Rotating speed (r/min)
Capacity (T/H)
Motor Power (kw)
CTB-609
600
900
≥1500
35
8-15
>100
CTB-612
600
1200
≥1500
35
10-20
>100
CTB-618
600
1800
≥1500
35
15-30
>100
CTB-718
700
1800
≥1500
28.6
20-45
>100
CTB-918
900
1800
≥1500
25.6
25-55
>100
CTB-921
900
2100
≥1500
25.6
30-60
>100
CTB-924
900
2400
≥1500
25.6
35-70
100~150
CTB-1018
1050
1800
≥1500
22
40-75
150~200
CTB-1024
1050
2400
≥1500
22
52-100
200
CTB-1030
1050
3000
≥1500
22
65-125
200
CTB-1224
1200
2400
≥1500
20
58-110
150~200
CTB-1230
1200
3000
≥1500
20
70-140
150~200
Dry separator
CTB-9018
900
1800
≥2000-5000
25
40-60
200
CTB-9024
900
2400
≥2000-5000
25
50-80
200
CTB-1021
1050
2100
≥2000-5000
25
60-100
200
CTB-1024
1050
2400
≥2000-5000
21
80-120
200
CTB-1030
1050
3000
≥2000-5000
21
90-130
200
CTB-1224
1200
2400
≥2000-5000
21
100-150
300
Model NO.: CTB-924
Energy Saving: Energy Saving
Warranty: 3 Years
Color: Black
Customized: Customized
Condition: New
Min Magnetic Induction Intensity: 1200
The Maximum Feed Size: 18-450mm
Model: CTB-924
Capacity: 150-600 T/H
Trademark: TANGSHAN DACHENG MACHINERY MANUFACTURING CO, LTD
Transport Package: Plastic Film
Specification: CTB-924
Origin: Tangshan, Hebei
HS Code: 84741000
Model NO.: CTB-924
Energy Saving: Energy Saving
Warranty: 3 Years
Color: Black
Customized: Customized
Condition: New
Min Magnetic Induction Intensity: 1200
The Maximum Feed Size: 18-450mm
Model: CTB-924
Capacity: 150-600 T/H
Trademark: TANGSHAN DACHENG MACHINERY MANUFACTURING CO, LTD
Transport Package: Plastic Film
Specification: CTB-924
Origin: Tangshan, Hebei
HS Code: 84741000
Overview: A magnetic separator is a device used to separate materials based on their magnetic properties. It can be categorized into dry and wet types. This equipment is widely utilized in the mining industry due to its simple structure, ease of operation, and maintenance. Magnetic separators are commonly applied for removing iron particles and are also used in resource recovery, timber, mining, ceramics, chemicals, and food industries. They are suitable for wet magnetic separation of magnetite, pyrrhotite, roasted ore, and ilmenite with particle sizes below 3 mm, as well as for iron removal from coal, non-metallic minerals, and building materials.
Structure: The magnetic separator consists of components such as a drum, roller, brush roller, magnetic system, tank, and transmission parts. The cylinder is fabricated by rolling 2-3 mm stainless steel plates, and the end cover is made of aluminum casting connected with stainless steel screws. The motor regulates speed through a reducer, driving the cylinder and magnetic roll to rotate. The magnetic system is open, installed inside the cylinder, and fully exposed. Magnetic blocks are secured to the yoke plate using stainless steel bolts, and the yoke shaft extends out of the cylinder. The end shaft is fixed with a turning arm, allowing adjustment of the magnetic system angle. The trough area is constructed from stainless steel, while the frame and other body parts are welded with ordinary steel.
Application: Drum magnetic separators are ideal for separating materials with different magnetic properties. They operate under both magnetic and mechanical forces. Benefits include a short magnetic circuit, minimal magnetic flux leakage, high magnetic intensity, low energy consumption, fine beneficiation results, and a simple structure that is easy to maintain.
Technical Specifications Table: