The subway and bus fare adjustments are imminent, and the rules for the use of bus tickets will soon be introduced. It is proposed that the time limit for card-carrying passengers to pick up and get off (outbound) in the same direction of the same line as the passengers in the same line shall not exceed 4 hours. If it times out, according to the incomplete transaction processing, the system will automatically deduct the fare from the station to the farthest station at the end of the station.


Over 4 hours is considered an incomplete transaction


The relevant person in charge of the transportation department introduced that the new ticket system will be implemented on December 28, 2014. The biggest change for the bus is that all the lines must be swiped on and off, and there will definitely be some problems in use, such as The car did not swipe, this situation is an incomplete transaction. At present, it is estimated that there are 1.5 incomplete transactions for every 100 passengers. “Beijing will introduce the use of subway bus ticket cards according to the new ticket fare, but before this is introduced, we will deal with the illegal use of ticket cards in accordance with internal regulations.”


According to the ticket usage method and the implementation rules, if the card is not picked up on the segmented charging line vehicle when it is boarded (inbound) and off (outbound), it is considered as incomplete transaction. On the segmented billing line, the time interval for card-carrying passengers to pick up and get off (outbound) on the same line in the same direction as the operation of the line can not exceed 4 hours. This timeout situation is also considered an incomplete transaction. In the above two cases, the system will automatically deduct the fare from the station to the farthest station at the end of the station.


Forgery card card to pay 150 yuan


For the evasion of the ticket, the implementation rules stipulate that if the passenger holding the one-way ticket exceeds the valid mileage, the ticket shall be replenished at the mileage fare. If you use someone else's student card, free card (certificate) or altered forged card (certificate) to take the bus, pay the ticket fee of 150 yuan, and collect the card (certificate).


The method indicates that the operating unit should establish a ticket inspection system and be equipped with auditors to conduct inspections on ticket sales and ticket inspections of passengers and station personnel, as well as ticket purchases and credit card checks. Malicious evasion tickets are twice the amount of the full fare, and are the actual price, do not enjoy any credit card offers. If you cancel your card in advance but have not got off the bus, you will be paid a full ticket in addition to the ticket.


In case of large traffic jam passengers can swipe in advance


What if the passengers take a long time because of a big traffic jam or a broken car? According to the regulations, if the passengers take longer time due to special reasons such as weather and roads, the flight attendants and station personnel should promptly notify and organize the cardholders to swipe the card first to avoid the loss of the ticket. In the case of special circumstances, the vehicle can not continue to operate in the middle, the passengers who have swiped the card can transfer to other vehicles under the guidance of the crew.


The relevant person in charge of the transportation department said that “taking more than 4 hours by car and dealing with incomplete transactions” is a continuation of the current “old rules”. As early as the municipal card was put into use throughout the city, the card pricing system has set a time limit of 4 hours. However, due to the normal operation of the existing bus lines, the one-way time will not exceed 4 hours, so the passengers are not deducted due to overtime.

Needle Valve

High Pressure Needle Valve Stainless Steel

A needle valve is used to accurately control flow rates of gasses or fluids. The adjustments are gradual and smooth for controlling the flow rate. Needle valves allow for the slow and partial opening of the valve, it is used to regulate flow and pressure.

Can be used for liquids, gases and steam in hydraulic, pneumatic, heating and steam systems, water technology system, chemical and food industries application.

Suitable for applications where fine flow control is required Ideal for pressure control and isolation of liquids and gases in instrument and hydraulic installations.

Needle valves can be used in many different applications with a need for flow or pressure regulation, in water-maker, reverse osmosis and water treatment industry.

Orifice - 1/4", 3/8", 1/2", 3/4",1"

Bar stock body with compact design, with T-handle

PTFE Packing and Stainless Steel T Bar Handle.

Pressure rating: 414bar (6,000psi).

Temperature rating: -54°C to +232°C.

Connection: BSPP, BSPT, NPT, 1/4", 3/8", 1/2", 3/4" and 1".

Can be panel and inline mounted.

Marine quality 316 stainless steel.

Heavy duty pattern design, 100% factory tested.

High Pressure Needle Valve Stainless Steel, water-maker reverse osmosis and water treatment industry,Swagelok, Parker, Hoke, liquids, gases and steam in hydraulic, pneumatic

NINGBO AIHUA AUTOMATIC INDUSTRY CO.,LTD , https://www.iwapneumatic.com