The gas generator is now also an indispensable energy saving and environmental protection device in the future coal consumption industry. In the production and use of gas furnaces, we must also pay attention to safety. Then we must first understand the gas furnace precautions, understand the characteristics of the gas furnace in order to better use the gas furnace. In accordance with the operation of the gas furnace, the family members are still at ease. Today, Xiao Bian talks about the daily safety regulations for gas furnaces.
(1) In any operating area, the carbon monoxide content in the air should not exceed 0.03 mg/l.
(2) The oxygen content in gas generator gas should not exceed 0.8%.

(3) Systematic drawings of production processes, system diagrams of gas, air, steam, and hydropower and brief and clear technical safety regulations should be hung in place.

Gas production
Two-stage gas generation

(4) When the gas producer is in normal production, especially when it is switched on, and the gas generator or gas cleaning equipment is cut off, it should be noted that the gas equipment and the gas pipeline must maintain positive pressure, in order to prevent air from entering the gas equipment through a tight place, In any case, the gas pressure should not fall below 10 mmH20.
No matter what you do, follow the rules. Only the correct use of gas furnace equipment can ensure the safety during the production process and the efficiency of the gas furnace.
The parameters of the blast gas volume of the gas generator lay the foundation for the heat balance in the furnace. For a mixed gas furnace, it is directly linked to the composition of the final gas. Saturation temperature is a customary term in the gas furnace industry and essentially refers to the mixing temperature of the gasification agent (air and water vapor).

Fin Press Line

Fin lines contain uncoiler, Oil tip tank for materials lubrication, Material guide device, high speed precise press, good quality fin die, and mechanical progession changer for single or double swtiching, Suction system with function of adjustment, stacker system. which allows you to make fin fabrication automatically.There are many different types:c type fin press,mechanical fin press,c type high speed fin press line

Fin Press Lines, Fin Press Line, Fin Press Lines, Fin Press, Mechanical Fin Line,C Type Fin Press,Mechanical Fin Press,C Type High Speed Fin Press Line

Satis Products Co., Ltd. , https://www.satismachinery.com