Sc200 Anti-Fall Hoist Safety Device (SRIBS SAJ30 SAJ40 SAJ50)

We are prefessional supplier of building hoist in China, well know mainand local brand whose load capacity is as much as 4000kg, lifting speed can reach up to 90m/min, and the erection height reaches up to 500m(With reinforced Foundation Sections)., our products have been widely used for transportation for both men and cargo in field of general buildings, but also industry, electric power, mining well, oil, chemical industry etc.
SC200TD, SC200/200TD building hoist:

SAJ30 SAJ40 SAJ50 SAJ60 SAJ70 Reverse Brake Construction Elevator Parts Anti Falling Safety Device For GJJ Baoda Passenger Hoist

 

A.Brand :SRIBS.

1.Internal system drum and centrifugal speed limiting device adopt forging die processing, which can prevent the hidden danger brought by traditional pouring process.

2.Using domestic leading enterprises of sliding bearings and the Great Wall high-quality grease, The gear shaft increases the oil groove, and increasing silencing shock absorber, so greatly reducing the incidence of noise

3.It adopts the spring parts and friction pieces professionally produced in China to ensure the stable braking moment and opening speed of the products.

 

If you need please contact us, looking forward to your inquiries!

Reducer



Our Advantage

1.High quality of motor, low noise NORD Brand ,Schneider Control

2.Strong load ability, low voltage start

3.Reasonable optimization design, compact structure, convenient installation and debugging

4.Running the lift elevator before the delivery

5.Driving mechanism refueling debugging, customer without refueling

6.Selects the high quality gear reducer and anti dropping device

 

 

PCCM hoist is provided with reliable safety interlock devices, safety switch, breakage protection switch, upper and lower limits and limit switches etc. Progressive dropping safety device and safety protection hook are provided. The safety design and configuration fully comply to national standards.

Adopting advanced technology both at home and abroad, SC series construction elevator is novel in design, reasonable in structure, simple in operation, convenient in assembly and disassembly, safe an reliable in working.

The construction hoist incorporates famous brand electric components and main parts in transmission mechanism. The steel structure is made of high-quality steel materials and welded with CO2 gas shield welding. Surface paint is made with imported raw materials in brilliant, long lasting colors.




HD Galvanised Mast Section with G350 Top Quality Steel

The Mast section (color is variable) is made of seamless tube or HF welded tube.

 

1. Steel plates are bented of U-shape to strengthen the mast section.

2. Mast section with galvanized coat or heat spray coat can be chosen.

3. High quality steel plate Q345B bended by special machine: Thickness 4.5mm.  

4. Welded steel tube Q345B and seamless steel tube 20# are also available: Ø76*4.5mm or Ø89*4.5mm 

(Thickness of 6mm or 8mm is also available).

5. 650*650*1508mm is the most common size fits for clients. Other model of mast section can choose: 

    450*450*1508mm, 650*900*1508mm,800*800*1508mm

 

 

Completed safety measures for  construction materials hoist lift

1. Equipping with Anti-falling governor  

2. Electrical an Mechanical interlock: Door safety switches, Slack rope switch

3. Safety hook

4. Upper and bottom limit switches, trap door limit switch

5. Overload protector

6. Bottom Buffer

7. Level Calling system and auto leveling device to be choose.

8. Ramp door for (Ex.door of cage).

Why Choose Us

1.We are group company but also manufactuer,which have more than 10 years export experiance
2.We can direct sale the construction lift for you with high quality and competitive price

3.Our factory is near with sea port, the land freight is cheaper than other suppliers.

4.We can customized for you, the working height, working radius, max load capacity and so on

 

Our Service

Pre-sale Service

1.We can customize products according to client's demand. Various types of construction lift for your choice.

2.Good Quality & Factory Price & Quick Response & Reliable Service, are what we are trying best to offer you.

3.All of our products are produced by our professional workmen and we have high efficiency sales team, you can totally trust us.

4.We have more than 20 years experience in designing and manufacturing, we cherish every order from our honored clients.
 

After Your Selection

1.We will count cheapest shipping cost and make invoice to you at once.

2.Test each machine before delivery to ensure their quality, then send out to you after your payment.
 

After-sale Service

1.Our engineers are available to guide the operators abroad.

2.We are very glad that customer give us some suggestion for price and products.

3.If you have any question, please contact us freely by E-mail or Telephone

 

 

FAQ

 

If you are interested in our Construction Hoist Lifts, please no hesitate ton contact us with following parameters:

1.Load Capacity: 1 ton or 2 tons?

2.Building height/ working height:?m

3.Double cages or single cage?

4.Other Special request?

 

We are prefessional supplier of building hoist in China, well know mainand local brand whose load capacity is as much as 4000kg, lifting speed can reach up to 90m/min, and the erection height reaches up to 500m(With reinforced Foundation Sections)., our products have been widely used for transportation for both men and cargo in field of general buildings, but also industry, electric power, mining well, oil, chemical industry etc.
SC200TD, SC200/200TD building hoist:

SAJ30 SAJ40 SAJ50 SAJ60 SAJ70 Reverse Brake Construction Elevator Parts Anti Falling Safety Device For GJJ Baoda Passenger Hoist

 

A.Brand :SRIBS.

1.Internal system drum and centrifugal speed limiting device adopt forging die processing, which can prevent the hidden danger brought by traditional pouring process.

2.Using domestic leading enterprises of sliding bearings and the Great Wall high-quality grease, The gear shaft increases the oil groove, and increasing silencing shock absorber, so greatly reducing the incidence of noise

3.It adopts the spring parts and friction pieces professionally produced in China to ensure the stable braking moment and opening speed of the products.

 

If you need please contact us, looking forward to your inquiries!

Reducer



Our Advantage

1.High quality of motor, low noise NORD Brand ,Schneider Control

2.Strong load ability, low voltage start

3.Reasonable optimization design, compact structure, convenient installation and debugging

4.Running the lift elevator before the delivery

5.Driving mechanism refueling debugging, customer without refueling

6.Selects the high quality gear reducer and anti dropping device

 

 

PCCM hoist is provided with reliable safety interlock devices, safety switch, breakage protection switch, upper and lower limits and limit switches etc. Progressive dropping safety device and safety protection hook are provided. The safety design and configuration fully comply to national standards.

Adopting advanced technology both at home and abroad, SC series construction elevator is novel in design, reasonable in structure, simple in operation, convenient in assembly and disassembly, safe an reliable in working.

The construction hoist incorporates famous brand electric components and main parts in transmission mechanism. The steel structure is made of high-quality steel materials and welded with CO2 gas shield welding. Surface paint is made with imported raw materials in brilliant, long lasting colors.




HD Galvanised Mast Section with G350 Top Quality Steel

The Mast section (color is variable) is made of seamless tube or HF welded tube.

 

1. Steel plates are bented of U-shape to strengthen the mast section.

2. Mast section with galvanized coat or heat spray coat can be chosen.

3. High quality steel plate Q345B bended by special machine: Thickness 4.5mm.  

4. Welded steel tube Q345B and seamless steel tube 20# are also available: Ø76*4.5mm or Ø89*4.5mm 

(Thickness of 6mm or 8mm is also available).

5. 650*650*1508mm is the most common size fits for clients. Other model of mast section can choose: 

    450*450*1508mm, 650*900*1508mm,800*800*1508mm

 

 

Completed safety measures for  construction materials hoist lift

1. Equipping with Anti-falling governor  

2. Electrical an Mechanical interlock: Door safety switches, Slack rope switch

3. Safety hook

4. Upper and bottom limit switches, trap door limit switch

5. Overload protector

6. Bottom Buffer

7. Level Calling system and auto leveling device to be choose.

8. Ramp door for (Ex.door of cage).

Why Choose Us

1.We are group company but also manufactuer,which have more than 10 years export experiance
2.We can direct sale the construction lift for you with high quality and competitive price

3.Our factory is near with sea port, the land freight is cheaper than other suppliers.

4.We can customized for you, the working height, working radius, max load capacity and so on

 

Our Service

Pre-sale Service

1.We can customize products according to client's demand. Various types of construction lift for your choice.

2.Good Quality & Factory Price & Quick Response & Reliable Service, are what we are trying best to offer you.

3.All of our products are produced by our professional workmen and we have high efficiency sales team, you can totally trust us.

4.We have more than 20 years experience in designing and manufacturing, we cherish every order from our honored clients.
 

After Your Selection

1.We will count cheapest shipping cost and make invoice to you at once.

2.Test each machine before delivery to ensure their quality, then send out to you after your payment.
 

After-sale Service

1.Our engineers are available to guide the operators abroad.

2.We are very glad that customer give us some suggestion for price and products.

3.If you have any question, please contact us freely by E-mail or Telephone

 

 

FAQ

 

If you are interested in our Construction Hoist Lifts, please no hesitate ton contact us with following parameters:

1.Load Capacity: 1 ton or 2 tons?

2.Building height/ working height:?m

3.Double cages or single cage?

4.Other Special request?

 

For our double side end face grinder machine, various grinding materials such as super hard abrasive: Diamond grinding plates, CBN(cubic boron nitride) grinding plates; Conventional abrasives: Cast iron plates, GC plates, etc can be adopted for different requirements of various products, so as to achieve double side precision grinding on work pieces made from various materials. 

Double side end face grinder machine SKFJX-GMM720

GMM720 Double Side Surface Grinding Machine

Double Disc Grinding Machine,Plastic Parts Surface Grinding Machine,Cooper Parts Surface Grinding Machine,High Efficiency Surface Grinding Machine

Xinxiang SKF machinery Co., Ltd. , https://www.grindingmachine.nl