Model NO.: GX-75
Condition: New
Raw Material: PVC
Extruding Capacity: 1000kg-2000kg/24hrs
The Range of Diameter: 8mm-50mm
Screw Speed: 0-70 Times Per Min
Screw L/D: 28:1
Total Power: 50kw
Power Supply: 380V 50Hz
Oversize: 17mx1.65mx4m
Cooling Water: Needed
Type: Customized
Transport Package: Standard Package
Origin: China
HS Code: 8477209000
Model NO.: GX-75
Condition: New
Raw Material: PVC
Extruding Capacity: 1000kg-2000kg/24hrs
The Range of Diameter: 8mm-50mm
Screw Speed: 0-70 Times Per Min
Screw L/D: 28:1
Total Power: 50kw
Power Supply: 380V 50Hz
Oversize: 17mx1.65mx4m
Cooling Water: Needed
Type: Customized
Transport Package: Standard Package
Origin: China
HS Code: 8477209000
PVC Pipe Plastic Conical Twin Screw Extruder Machine

Machine configuration
extruder 2sets
Cooling tank 2sets
Hauling machine 2sets
Winding machine 1set
mould 2sets
Coiling pipe bender 1set
drier 1set
High speed kneading machine 1set









4 Specifications of each single part
 A. 
        Height of center 1000mm
(1) Gear Box:
             Model               173
             Reduction gears    Special for Plastic Machine
                                           ZLYJ series Hard tooth mill flour
             Shape                    Square
(2) Fan 1set (Blowback tube):Moter power       60W 
(3)Screw/Screw tube parameter
          Screw diameter    Ф65mm
          Screw quantity     single screw /extruder 
          Screw ratio        28/1
          Screw materials    38CrMoALA
          Screw structure    three stops
          Heat treatment     nitriding and hard chromium plating
          Surface hardness    HV940-1050
          Nitriding depth      0.6~0.7mm
(4)Screw tube heating
          Screw tube heating   Aluminum heater three-section 8.5KW X 2set
          Cooling Model       air cooling  fan 180W X 6sets
          Screw tube feeding mouth bring cooling device
(5)The main motor parameters
           motor power  11KW X 2set
(6)Electrical control
          Temperature control table          Fully automatic
  1. Stainless steel hopper

B. cooling water tanks (2sets)
         length      2.4M
         type of cooling  spraying
         material     stainless steel

C. Hauling machine  (2sets)
        Pulling speed      0~18m/min
        Double roller      Printing hard chromium plating and rubber roll
        Motor power       1.5KW X 2set(variable frequency motor)
        reduction gears     60type

D. winding machine 1set
        parallel      14*2
        warp         4
        motor power  level-6  1.1KW*2sets

E. Mould
        handpiece     2sets
        Mouth mode   10sets

F. Coiling pipe bender  1set
        manual operation    power-operated

G. dryer 1set
        Length  800
        heating power  4KW

H. High-speed kneading machine(100L)1set 
        Power      15KW   

  PVC Pipe Plastic Conical Twin Screw Extruder Machine

Machine configuration
extruder 2sets
Cooling tank 2sets
Hauling machine 2sets
Winding machine 1set
mould 2sets
Coiling pipe bender 1set
drier 1set
High speed kneading machine 1set









4 Specifications of each single part
 A. 
        Height of center 1000mm
(1) Gear Box:
             Model               173
             Reduction gears    Special for Plastic Machine
                                           ZLYJ series Hard tooth mill flour
             Shape                    Square
(2) Fan 1set (Blowback tube):Moter power       60W 
(3)Screw/Screw tube parameter
          Screw diameter    Ф65mm
          Screw quantity     single screw /extruder 
          Screw ratio        28/1
          Screw materials    38CrMoALA
          Screw structure    three stops
          Heat treatment     nitriding and hard chromium plating
          Surface hardness    HV940-1050
          Nitriding depth      0.6~0.7mm
(4)Screw tube heating
          Screw tube heating   Aluminum heater three-section 8.5KW X 2set
          Cooling Model       air cooling  fan 180W X 6sets
          Screw tube feeding mouth bring cooling device
(5)The main motor parameters
           motor power  11KW X 2set
(6)Electrical control
          Temperature control table          Fully automatic
  1. Stainless steel hopper

B. cooling water tanks (2sets)
         length      2.4M
         type of cooling  spraying
         material     stainless steel

C. Hauling machine  (2sets)
        Pulling speed      0~18m/min
        Double roller      Printing hard chromium plating and rubber roll
        Motor power       1.5KW X 2set(variable frequency motor)
        reduction gears     60type

D. winding machine 1set
        parallel      14*2
        warp         4
        motor power  level-6  1.1KW*2sets

E. Mould
        handpiece     2sets
        Mouth mode   10sets

F. Coiling pipe bender  1set
        manual operation    power-operated

G. dryer 1set
        Length  800
        heating power  4KW

H. High-speed kneading machine(100L)1set 
        Power      15KW   

 

LED or Metal Halide Lamp Lighting Tower Feature:


The SWT lighting tower is an economical lighting device which easy operate, compact, high performance, and affordable. This series of light tower use a number of advanced and innovative technologies:

      1. The control panel is simple with the common configuration: timer, emergency stop button, general alarm light, start switch, light pole control switch and lighting control switch. The power output adopts standard quick insertion output mode, and operation is simple and convenient;

       2. Four large-capacity batteries, the lighting system can be powered without the Generator set if power sufficiently.

       3. The Diesel Generator Set is equipped with Kubota or Perkisn Series engine with high quality control system.

       4. More humanized maintenance design, all maintenance points are unimpeded ;

       5. LED or Metal Halide Lamp lighting system, energy conservation, environmental protection;

       6. High-standard mold forming process for all tanks;

       7. Internal wiring harness adopts fast plug-in connection mode;

       8. Light tower adopts mobile trailer design. Short distance transportation can be directly operated by using tractor-assisted, convenient, fast and efficient;

      9. Using anti-rust material, and with high-temperature baking paint process surface, effectively reduce noise up to 15db or more;

     10. Using hydraulic power to drive lamp post , and making the unit easy to operate.

      11. Four supporting legs install light tower, which can make the installation and dismantling process easily.

Lighting Tower

Light Tower Genset,Light Tower Genset,Light Power Generator,Lighting Tower Generator

Guangdong Superwatt Power Equipment Co., Ltd , https://www.swtgenset.com