If the dump truck is running at a high speed for a long period of time and is running for a long period of time, it will cause great wear on the Brake pads of the vehicle. Therefore, in order to be able to better protect the dump truck that often runs long distances, The safety of the driver is the need to make regular replacements for the brake discs of the dump truck on a regular basis. How do you judge correctly that the brake pads of the vehicle need to be replaced? The normal thickness of the new dump truck's brake pads is about 1.5 cm in thickness. Then, in the course of continuous use in the future, different friction levels will occur, and the thickness of the brake pads will gradually begin to thin. When we use the visual method to watch the brake pads of the dump truck, if the remaining thickness is only one third of the original thickness, then the dump truck driver needs to be ready to replace the brake pads. Of course, this method is only limited to the way the wheels are designed to be viewed with the naked eye. If they cannot be directly viewed, they still need to be disassembled. In fact, the replacement of the brake pads of the dump truck is still judged by the driver's operation and the condition of the road surface being driven. At present, there is no specific replacement time. In general, when the dump truck is driven, When it is about 60,000 kilometers, it needs to be taken into account immediately. There are still some errors in the use of visual inspection of the brake pads of the dump truck. It is best to go to a professional maintenance station. The use of calipers for accurate measurements is the best. In fact, when the brake pads of the dump truck gradually become thinner, we can feel the effect of the brakes. If it is during the stepping on the brake pedal of the dump truck, it takes a lot of effort to get the braking effect when the original light is pressed. Obviously, the braking effect of the dump truck is absolutely reduced. When some of the driver's friends feel that their brake fluid is becoming soft, the sudden feeling is a bit unpredictable. Then, no doubt, or go to a good check of the wear of the vehicle brake pads. There are drawbacks to determining the wear condition of the brake pads because of their feelings, because they feel that this is also unclear, so the driver of the tipper truck still needs to develop a good habit of regularly checking and maintaining the vehicle. Elevator Cable with a special structural design, long service life, to maximize the
elevator production enterprises operating efficiency. Cable Elevator Cables, Cable Elevator, Cable For Elevator,Elevator Cable Realever Enterprise Limited , https://www.cnelevator-parts.com
Application scope
Elevator
Cable with a special structural design, long service life, to maximize
the elevator production enterprises operating efficiency. The elevator control cable provides overall electrical control with long suspension length and mechanical stress. Elevator cable due to the use of wire bearing cable, can be used for long-distance suspension use occasions.
characteristic
The use of new cold special flexible jacket, can be low temperature at -15 ℃ still remain soft.