As a special type of vehicle, aerial work vehicles are characterized by the following aspects: One is manned aerial work. Therefore, the safety requirements for its operations are higher than those of general construction vehicles, which is called “high security”; the second is the construction site environment. Non-structural, that is, the unpredictable and changeable working environment of the work environment requires that the high-altitude vehicle has “high adaptability” to the environment; because it is often used in repair work, and the aerial work vehicle is mostly used outdoors or in the field. Poor environmental conditions, so it is required to have a "high efficiency." In order to meet these requirements, high-altitude trucks will inevitably move toward the miniaturization of intelligence, light weight, and the same working height.

Scissor lift trucks are widely used special equipment for aerial work. Its scissor-type mechanical structure makes the lifting platform have a higher stability after lifting, a large working platform and a high carrying capacity, which allows a larger range of aerial work and is suitable for many people to work at the same time. It makes high-altitude operations more efficient and safer. Features: The lifting mechanism is made of high strength manganese steel pipe. It is equipped with a safety device that prevents the lifting platform from overloading. With safety valve to prevent rupture of hydraulic lines. There is an emergency descent device in case of power outage. The product is suitable for high-altitude equipment installation, maintenance and other high-altitude operations in various industries. According to different requirements can choose different power forms (such as: three-phase AC power supply, single-phase AC power, DC power supply and internal combustion power, etc.), plus with manual hydraulic devices, can be in the power or no power supply place as usual lifting work, and can be increased .

The vehicle-mounted aerial work vehicle is converted from a lifting platform and a car. It takes the power of the car's engine and realizes the lifting and lowering functions of the lifting platform. H-type hydraulic legs are used to ensure the stability of the machine and the safety of the operation. DC DC independent power source can be used to realize the rotation and lifting functions of the elevator. Applicable to the wide work area and high amplitude of the high-altitude operation products have a wide range of operations, long working hours and other characteristics, especially suitable for field maintenance, street lamps and other maintenance.

The battery vehicle-mounted aerial work platform is a high-altitude operation-specific equipment that is converted from a lifting platform and a battery car. It uses the original DC power of the battery car, and does not require an external power supply to achieve the lifting of the lifting table and the movement of the entire machine. It is easy to move, has a wide range of job flow, products have no pollution, no tail gas, a wide range of operations, and strong mobility. Especially suitable for cold storage, crowded areas (train stations, bus stations, airports) and so on.

There is diesel self-propelled, battery self-propelled, trailer-type, with telescopic arm, can overhang operation, across a certain obstacle or in a lift can be multi-point operations; 360-degree rotation, platform load, available for two people or Many people work at the same time and can carry certain equipment; the lifting platform has good mobility and convenient transfer of the venue; it is beautiful in appearance and suitable for indoor and outdoor operations and storage. Applicable to stations, docks, shopping malls, stadiums, residential properties, factories and mines and other large-scale operations. The crank-type aerial work platform is called an aerial work platform vehicle and is mainly used in a relatively high working environment. It carries between one person and two people. The fire brigade generally uses this type of lift. The boom type aerial working vehicle can be divided into two kinds of straight arms and crank arms according to an arm-stand type. It is mostly used in high-demanding places such as shipyards. Such machines are safe and easy to move, but the cost is high.

Traction boom type aerial working vehicle: easy to move, compact structure of crank arm, adopts new high quality steel, high strength, light weight, direct access to AC power or use its own power to start, erecting speed, with telescopic arm, worktable can be Elevated and extendable, it also rotates 360 degrees, making it easy to reach obstacles and reach working positions. It is ideal for high-altitude operations.

Boom-type aerial work platform vehicle: Using JMC, Dongfeng XBW car chassis, using folding work arm (two arm, three arm), working height 12-18 meters, platform rated load 200kg, lift arm can rotate 360o, Turntable, work bucket can be operated in two places. This product is simple in operation structure, easy to operate, safe and reliable, and beautiful in appearance. It is an aerial work equipment with the best safety and work efficiency. Four hydraulic legs are assembled on the vehicle, and the type of the outrigger is H, so as to ensure the stability and safety of the entire vehicle during operation.

The boom-mounted aerial platform trucks are widely used in the installation, maintenance, and ascent operations of municipal, power, street lighting, advertising, communications, photography, gardens, transportation, terminals, airport ports, and large-scale industrial and mining enterprises.

The boom type aerial work vehicle is a new generation of folding arm lifts. Can be widely used in stations, docks, airports, hotels, post and telecommunications, municipal gardens, grain storage, cleaning companies, public buildings facade decoration, decoration or power system installation and maintenance, and so on. The elevator has the advantages of light weight, self-propelled running, electric starting, self-supporting legs, simple operation, large working surface, free rotation of 360 degrees, and especially high-altitude operations that can overcome obstacles. Can be suitable for outdoor operations, using diesel as a power. It is also possible to use batteries as the walking and working power of the machine as required.

Standard configuration: Articulated aerial work platform with intelligent bus control, proportional control, emergency pump, horn, work meter, tilt alarm, 360 degree non-continuous rotation of turntable, automatic leveling platform, circuit fault code display, platform hydraulic swing, Engine restart protection, engine glow plug preheater, rotary strobe light, 4*2 drive, Euro III emission engine, overload limit, foot switch.

The lifting platform itself has a walking and steering drive function, no manual traction, no need for external power supply, flexible and convenient, so that high-altitude operations more convenient and efficient, is an ideal high-altitude operation equipment for modern enterprise efficient and safe production. Self-propelled self-propelled series elevator Self-propelled self-propelled lifter, with automatic walking function, able to work under different working conditions, no external power supply, no need for external power traction, flexible movement, easy operation, and free movement, only one person can complete forward, backward.

Self-propelled aerial work platform, which has the function of self-propelled walking, can walk quickly and slowly under different working conditions, and can perform all actions such as up and down, forward, backward, and steering continuously in the air with only one person's operation. Especially suitable for airport terminals, stations, terminals, shopping malls, stadiums, residential properties, factories and mines and other large-scale operations.

The aluminum alloy aerial working plane adopts high-strength and high-quality aluminum alloy material, which has the advantages of beautiful appearance, small size, light weight, stable lifting, safety and reliability. Its lightweight appearance can exert the highest lifting capacity in a very small space. Aluminum alloy mobile type: The product represents single column aluminum alloy elevator, double column aluminum alloy elevator, three column aluminum alloy elevator, four column aluminum alloy elevator. It is generally suitable for 1-2 people to climb. The single column height is less than 10 meters, the double column is generally less than 12 meters, and the multi-column height can reach about 20 meters. The new design of the new generation of products, the overall use of high-strength aluminum profiles refined, due to the high profile strength, so that the lift deflection and swing minimal. It adopts a stern column structure, large load capacity, large platform area, excellent stability, flexible operation, and convenient implementation. With four-wheel movement, it has the advantages of beautiful appearance, small size, light weight, balanced lift, safety and reliability, and can be operated up and down. It is widely used in factories, hotels, restaurants, railway stations, airport theaters, exhibition halls and other places. It is a maintenance machine. , paint decoration, exchange of lamps, electrical appliances, cleaning and maintenance purposes such as the best safety partner.

The use of aerial vehicles for aerial work is an advanced way of climbing. Its development is closely related to the level of development of the national economy. According to reports from foreign professional media magazines on aerial work, statistics are shown in Table 1. The more developed the economy, the greater the demand. Large, and the greater the unit GDP demand. From Table 1 and Table 2, we can see the gap between China's demand for the industry and developed countries or regions. Compared with developed countries and regions, China not only has a small unit GDP demand, but also has a low ratio of unit GDP demand to GDP. This shows that the market demand for work baskets is related to the economic scale and to the degree of economic development. This also precisely shows that high-altitude vehicles have very broad prospects for development in China.

As an engineering vehicle, aerial work vehicles are characterized by the following particularities: First, they are operated at high altitudes, their operational safety requirements are higher than those of general construction vehicles, which is called “high security”; and second, the environment of construction sites is “unstructured”. ” That is, its working environment is unpredictable and changeable, so it requires a high degree of adaptability to the environment; Third, it is often used for repair work, and is mostly outdoor or in the field, and the working environment is poor, so it is required to have work. The "high efficiency".

Due to the wide range of applications of high-altitude vehicles, involving many industries, and the content of operations in each industry is different, according to incomplete statistics, only 5,000 people are killed each year due to the fall of the use of high-altitude working baskets. The mode of operation has basically disappeared in developed countries and replaced by aerial vehicles. Therefore, the maintenance of urban buildings in the future will make heavy use of aerial vehicles.

Our company can use different materials to make pump grade according to the well condition. The pump for high sand content and high gas well can be provided completely according to customer requirements. Our company has a professional design team, advanced production equipment, first-class service team, and continuous quality assurance for customer service.

513Series Petroleum Submersed Pump

513Series Petroleum Submersed Pump,Petroleum Submersed Pump,Water Pump,Electric Pump

Tianjin RongHeng Group LLC , https://www.ronghenggrouppump.com