Shackles, rings, eye hooks, rope cards, clamps, etc. are the main end fittings that make up the slings and spreaders. Correct use or not directly relates to the carrying safety of spreaders and riggings.
The final product will be 40%-45% tire oil (fuel oil), carbon black and 35% carbon black, 10% steel and another 5-10% recycled gas (CH4-C4H10). Small Scale Plastic Recycling Plant Tyre Pyrolysis Plants,Waste Pyrolysis Solutions,Waste Pyrolysis Equipment,Reactor Plate Pyrolysis to Oil Machine Henan Lanning Technology Co., Ltd , https://www.lanningrecycling.com
Accessories requirements:
â— Must be manufactured by a professional manufacturer according to the corresponding standards
â— Technical parameters should have a rated load
â— According to the provisions of the safety factor of not less than 4
Shackle (U-shaped card, snap ring)
Shackles are divided into two types: D-type and bow-type. They can be used as end fittings to directly lift items, and also can be used as flexible rigging connectors. More product specifications, generally based on the actual use of the situation, according to the shackle's rated load selection. WII indicates the rated load.
Shackle models are manufactured according to the national standard, and some are manufactured according to American, Japanese, and Australian standards.
The national standard model is directly marked with the rated load.
American standard models directly mark the inch and rated load. For example, the model number is 1 1/2 and the rated load is 17 tons.
Shackle scrapping standards:
1. There is obvious permanent deformation or the shaft pin can not rotate freely.
2. The wear amount of the cross-section of the buckle body and the shaft pin is more than 10% of the original size.
3. Any cracks appear on the shackle.
4. The shackle cannot be locked.
5. Unqualified after shackle test.
6. If there is a large area of ​​corrosion or rust on the shackle body and shaft pin, it should be scrapped immediately.
The main process is to pyrolyze the tire into oil and gas by directly heating the reactor;
The condenser or cooling tube will cool the gas to a liquid oil with the aid of circulating water;
Then, the remaining gas that cannot be cooled into liquid oil is recycled to the reactor heating system; after the oil and gas is completely discharged, the reactor is stopped to be cooled, and the reactor below 70 degrees is cooled; then the door can be automatically opened and the carbon black can be discharged. .
The capacity of each batch of products ranges from 5 tons to 20 tons.
LN-2200-6000 capacity 5-6 tons
LN-2200-6600 has a capacity of 7-8 tons
LN-2200-8000 has a capacity of 9-10ton
LN-2600-6600 has a capacity of 10-12ton
LN-2600-8000 has a capacity of 12-14ton
LN-2800-6000 capacity is 10-12ton
LN-2800-6600 has a capacity of 12-14 tons
LN-2800-8000 capacity is 15-20ton
If cut into small pieces, it can handle more.