Fiesta,Party, accesories, headband, key chain, pinata AMERICA DIVISION OF TOP SHINE CO.,LTD. , https://www.fiestasupplier.com
This copper wire recycling machine is used for recycling scrap copper wires and cables, such as automobile wires, telecommunication wires, and other types of copper wires, to recover copper. The machine consists of a Crusher, Crushed Material Channel, Vibrating Separator, Air Blower, Dust Collector, and the Underbed, etc.
Scrap Copper Wire Granulator Main Features:
1. No water needed, just put cable wires into the plant
2. Turnkey and compact type, PLC controller, only 1-2 workers to operate, occupy small area
3. Purity of copper granules much more than 99%
4. Applications: Communication cables, Civilian wires, filament wires, all single-branch wires
Final Copper & Plastic Granules Output:
Copper Separator Machine Working Process:
Â
Model
Processing Capacity
(kg/h)
Processed Wire Dia.
Total Power
Voltage
Dimension
Weight
FC-400-1
80-120
0.3-20mm
11.92KW
customized
1.5*1.5*1.9m
750kg
FC-400
200-250
23.12KW
2.7*1.9*2.3m
1200kg
FC-600A
300-400
48.36KW
4*1.85*2.4m
3400kg
FC-600
300-400
52.36KW
4.3*1.95*2.4m
3400kg
FC-800
600-800
0.1-40mm
75.4KW
9.1*2.3*3.54m
8000kg
FC-1200
1000-1200
129.6KW
16*10*3m
12000kg
Different Models of Scrap Wire Shredder:
Contact us freely for more detailed quotation.
Model NO.: FC
Function: Scrap Copper Wire Recycling
Structure: Compact
Recycling Method: Dry Type
Applicable Wire: All Kinds of Copper/Aluminum Cable
Working Principle: Crushing & Separating
Processed Wire Diameter: 0.3-40mm
Voltage: Customized
Trademark: FORCHEN
Transport Package: Ply Wooden Case
Specification: weight: 800-12000kg
Origin: Henan, China
HS Code: 8479
Scrap Copper Wire Granulator General Introduction1. Put wires and cables into the crusher, where they are crushed and the plastic sheath and copper are completely separated. The length of the crushed material depends on the mesh size of the sieve. A larger mesh results in longer crushed material and higher output. The mesh should be selected based on the type of material during production.
2. The crushed material (a mixture of copper granules and plastic pieces) is conveyed to the separator via a conveyor. During this process, dust and some lightweight plastic pieces (including fiber, rope, or tapes mixed in the wires) are collected by the pressure-reducing blower. The opening of the pressure-reducing blower is connected to the dust collector, which uses a dust COLLECTION bag to prevent dust emissions for environmental protection. Dust and some lightweight plastic pieces are collected in this bag and will be discharged when the bag is full.
3. The separator is used for separating plastic pieces and copper granules. Due to differences in physical properties and specific gravity between different materials, there is a deviation in specific gravity under the influence of aerodynamic forces and vibration friction. By adjusting the conveying speed and amplitude parameters, copper granules (with higher specific gravity) move to the bottom of the sieve and move from down to up, while plastic pieces (with lower specific gravity) move to the top of the copper granules and move from up to down, eventually being discharged through separate openings.
4. All units are installed on the Underbed to form a whole structure. The machine is pre-adjusted for production before shipping, so the customer only needs to connect it to the power supply.
Copper Cable Granulator Technical Parameters: