Long Working 500m2/16 Working Hrs Capacity Lxm-20 Polishing Machine
Â
| Â | Â | LXM-8 | LXM-12 | LXM-16 | LXM-20 | LXM-24 |
|---|---|---|---|---|---|---|
| Polishing Heads number (optional) | pc | 8 | 12 | 16 | 20 | 24 |
| Working width (optional) | mm | 500-1300 | 500-1300 | 500-1300 | 500-1300 | 500-1300 |
| Thickness | mm | 15-50 | 15-50 | 15-50 | 15-50 | 15-50 |
| Air Consumption | m³/h | 10 | 14 | 19 | 24 | 29 |
| Main motor power | KW | 6x7.5+2x9kw | 9x7.5+3x9kw | 12x7.5+4x9kw | 15x7.5+4x9kw | 18x7.5+6x9kw |
| Dimensions (L x W x H) | mm | 5320*2200*2200 | 6600*2200*2200 | 7900*2200*2200 | 9200*2200*2200 | 10500*2200*2200 |
| Main motor power | KW | 74 | 105 | 135 | 162 | 202 |
| Total weipht | m³/h | 11 | 13 | 16 | 20 | 24 |
Advantages
1, Auto Lubrication System for Polishing Heads and Key Bearings!
2, PLC Intelligent Control System! Warning Device for Polishing Material Wearing!
3, Imported Electric Parts: SIEMENS Motor and Switch, FUJI Contactor, Japan Yaskawa Inverter
5, Auto Detector for Slab Size
6, Unique Damping Device for Polishing Heads
7, AIRTEC Air Cylinder, Germany Technology, TAIWAN Produced
8, Independent Switch Gear for Each Polishing Head Pressure Adjustable for Each Head
9, TAIWAN Linear Guide Rail for Crossbeam Back and Forward Movement.Â
10, Anti-collision Device for Crossbeam Back and Forward Movement While Limit Switch be out of order
11, With Slab Loading and Unloading Trolley! Cleaning Head and Dryer
Â
LXM-16 Output: 30-35m2 per hour for 85 degree Shinning!
LXM-20 Output: 35-40m2 per hour for 85 degree Shinning!
Â
| Â | Â | LXM-8 | LXM-12 | LXM-16 | LXM-20 | LXM-24 |
|---|---|---|---|---|---|---|
| Polishing Heads number (optional) | pc | 8 | 12 | 16 | 20 | 24 |
| Working width (optional) | mm | 500-1300 | 500-1300 | 500-1300 | 500-1300 | 500-1300 |
| Thickness | mm | 15-50 | 15-50 | 15-50 | 15-50 | 15-50 |
| Air Consumption | m³/h | 10 | 14 | 19 | 24 | 29 |
| Main motor power | KW | 6x7.5+2x9kw | 9x7.5+3x9kw | 12x7.5+4x9kw | 15x7.5+4x9kw | 18x7.5+6x9kw |
| Dimensions (L x W x H) | mm | 5320*2200*2200 | 6600*2200*2200 | 7900*2200*2200 | 9200*2200*2200 | 10500*2200*2200 |
| Main motor power | KW | 74 | 105 | 135 | 162 | 202 |
| Total weipht | m³/h | 11 | 13 | 16 | 20 | 24 |
Advantages
1, Auto Lubrication System for Polishing Heads and Key Bearings!
2, PLC Intelligent Control System! Warning Device for Polishing Material Wearing!
3, Imported Electric Parts: SIEMENS Motor and Switch, FUJI Contactor, Japan Yaskawa Inverter
5, Auto Detector for Slab Size
6, Unique Damping Device for Polishing Heads
7, AIRTEC Air Cylinder, Germany Technology, TAIWAN Produced
8, Independent Switch Gear for Each Polishing Head Pressure Adjustable for Each Head
9, TAIWAN Linear Guide Rail for Crossbeam Back and Forward Movement.Â
10, Anti-collision Device for Crossbeam Back and Forward Movement While Limit Switch be out of order
11, With Slab Loading and Unloading Trolley! Cleaning Head and Dryer
Â
LXM-16 Output: 30-35m2 per hour for 85 degree Shinning!
LXM-20 Output: 35-40m2 per hour for 85 degree Shinning!
Product Introduction:
MG serie pumps are suitable for delivering slurries in mining, explosive sludge in metal melting, dredging and so on. MG series gravel pumps are designed for continuously handing the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. The pumps The advantages of the pump are easy installation and operation, good performance of NPSH and abrasion resistance. Our MG pump is including: Sand Pump , Dredge Pump , Sand Suction Pump, Coarse Sand Pump, Pulp And Paper Gravel Pump, Sugar Beet Handling Gravel Pump.
Product Features:
-Single casing
-Wide wet-passage
-Wear resistant metal wet end part, long service life
-Discharge direction can be oriented at any degrees
-Good performance of NPSH
Application Range:
Size: 4 inch to 14 inch
Capacity: up to 4320 m3/h
Maximum head: up to 80m
Coarse Sand Pump,Sand Dredge Pump,Wear Resistant Pump,Centrifugal Dredge Pump
SHIJIAZHUANG MUYUAN INDUSTRY & TRADE CO., LTD. , https://www.cnmuyuan.com