Performance Characteristic (1). The frame is a welded construction with Steel Plate, vibration to eliminate stress, with sufficient rigidity and high strength, steady and reliable performance, easy operation and maintenance. The Back Gauge The back gauge is motorized adjustable, the value is shown on the control on the front of the machine, adjusting the gap between blade is portable and prompt, the value of the gap is indicated on a dial. Cutting Time and Safety (1). The cutting times are shown in the control on the front of the machine, equipped with lighting-alignment device, protective fence and safety inter-locker to ensure the operation safety. Blade Clearance and Blade (1). The adjustment of the gap between tools can be showed on an indicating dial. Electrics and Hydraulic European key electrics and hydraulic valves. Advanced integral hydraulic system with good reliability - imported from Germany. Shearing Angle Shearing angle is variable, which can reduce the shearing deformation of sheet metal and can shear much thicker sheet metal. NC Control Front Operated Motorised Back gauge with digital readout display - Estun E10s, stroke range 10 to 750 mm. Ball Rolling plate support of the machine, this can reduce the hurt of the plates and reduce the conflict force. Besco Hydraulic Shearing Machine, CNC Cutting Machine parameter Cutting thickness (mm) Cutting width (mm) Cutting angle (°) Travel times (min-1) Back gauge range (mm) Anti-strength of plate (N/mm²) Main power (Kw) The structure Steel Pipe has hot - rolled seamless steel tube and welded steel tube.The seamless steel tube for structure is divided into two types according to the provisions of "seamless steel tube for structure" (GB/ t8162-2008) : hot rolling (extrusion, expansion) and cold drawing (rolling).The outer diameter of hot-rolled steel pipe is 32-630mm and the wall thickness is 2.5-75mm. The outer diameter of cold-drawn steel pipe is 5-200mm and the wall thickness is 2.5-12mm. Welded steel pipe is made of steel plate or steel strip after crimping and forming, which can be divided into straight welded steel pipe and spiral welded steel pipe.The outer diameter and wall thickness of the direct-welded steel pipe are 5-508mm and 0.5-12.7mm respectively, which shall comply with the provisions of GB/ t3793-2008.The welded steel pipe for low-pressure fluid transportation is also called common welded pipe, commonly known as clark pipe. The specification is expressed in mm of nominal diameter, which should comply with the provisions of GB/ t3091-2008 for low-pressure fluid transportation. Structural Steel Tube,Carbon Structural Tube,Api 5L Steel Pipe Shandong Guanzhou Iron and Steel Group Co., Ltd. , https://www.guanzhousteel.com
Besco Hydraulic Shearing Machine, CNC Cutting Machine
(2). Hydraulic drive, swing beam, the return of the knife beam is smooth and prompt by nitrogen cylinder.
(2). Protective fence and the safety interlocker to ensure the operation safety. Power supply switch that is set in the electric box will be automatically turned off when the box's door is opened or the fence is turned up. Protecting barrier with safety interlocker is mounted on the back of the machine. Another, there are travel limit protection and foot pedestal mounted emergency off switch.
(2). Adopt handwheel to rapidly and accurately adjust the blade clearance.
(3). The rectangular monoblock blades featuring long life with 4 cutting edges, quality high-carbon high-chrome blades D2 quality.
(4). Light alignment device eases drawing line for cutting, standard front support sheet frame, a set of standard blades.
Model
QC12Y-4*5000
4
5000
1.5
10
20-500
450
7.5
QC12Y-6*2500
6
2500
1.5
18
20-500
450
7.5
QC12Y-6*3200
6
3200
1.5
14
20-500
450
7.5
QC12Y-6*4000
6
4000
1.5
12
20-500
450
7.5
QC12Y-6*6000
6
6000
1.5
8
20-500
450
11
Besco Hydraulic Shearing Machine, CNC Cutting Machine picture
Â
Besco Hydraulic Shearing Machine, CNC Cutting Machine