How often does the wiper change? The wiper is responsible for cleaning the windshield of the car and providing the driver with a driving view. When the driver of the car drives the car on a rainy day, the most needed is a wiper to clean the windshield to provide a view to the riders. Then the wiper is Isn't there also a life span? How often do you change it? Many drivers are not very familiar with this issue. The following are some of the issues that Xiaobian has compiled for the riders. The correct way is to remove the foreign matter and dirt from the wiper strip at each car wash or regularly, first wash it with water, then wipe the wiper strip with cotton cloth or paper towel, so that it is not only clean, but also used time. Still long. Some car owners like to buy a 1-2 inch long when replacing the wiper blade, and feel that the scraping area is larger and the effect is better. In fact, this is wrong. When the wiper blade is too long, it may wear the A-pillar trim or the front windshield cover, which can cause resonance and abnormal noise. The special size of the car is the correct choice. The above is some of the relevant knowledge about car wipers that Xiaobian has compiled for the riders. In the daily life, the riders need to know more about this aspect to enrich themselves. Semi-Trailer axle is placed in the vehicle center of gravity (when vehicle uniform loading), and is equipped with the horizontal and vertical force can be passed to the tractor trailer hitch. Semi-trailer is generally three axle semi-trailer, and its types are divided into 11 m warehouse bar semi-trailer, 13 meters storehouse bar, low flat-panel semi-trailer and so on many kinds. By traction pin connected to hang half a head of a heavy transport vehicles. Semi-Trailer Semi-Trailer, Tank Semi Trailer,Dump Semi Trailer,Flat bed Semi Trailer,LPG Semi Trailer,Flammable Liquid Semi Trailer,Oil Tanker Semi Trailer CLW GROUP TRUCK , http://www.clwgrouptruck.net
Generally, the life of the wiper blade is about 1-2 years, and it can be used for 3-4 years if it is well maintained. When it is found that some of the scratches are not clean, you can use a fine sandpaper to polish and renovate. If the scraping is not serious or it is a long time, it is better to replace it as soon as possible. After all, the price is not expensive, and it is relatively simple to replace.
How to repair the wiper every day?
What we call the maintenance of the wiper is mainly to keep the wiper blade clean, to avoid excessive dirt on the wiper strip, and not to mix foreign matter. If the wiper is mixed with foreign matter, it will not be cleaned, not only speeding up the aging of the wiper strip, but also easily scratching the front windshield.
1, avoid dry scraping
Glass water is very cheap, don't want to use it. Especially on sunny days, do not dry up a bit of floating soil, use it with glass water, otherwise it will seriously damage the rubber of the wiper.
2, reduce exposure
The vehicle is parked under the scorching sun. The temperature of the front windshield is very high. The wiper strips that are close to the glass will accelerate the aging due to the high temperature. Therefore, when the vehicle is parked in the outdoor parking lot, we can erect the wiper to reduce the contact between the wiper strip and the hot glass to extend the life of the wiper.
3. Don't change the wiper size at will.
Dump semi-trailer
Dump semi-trailer is applicable to coal, ore, building materials such as scattered bulk cargo transportation. Dump semi-trailer according to use can be divided into two broad categories: type belongs to the highway transportation of heavy and super-heavy tipping trailer mainly undertake large-scale mining, engineering tasks such as transportation, often and excavator. Another kind of highway transportation with light medium normal dump trailer mainly sandstone, clay, coal of bulk cargo transportation, which is equipped with loader. 1, use rear and side dump car, can effectively improve the efficiency of loading and unloading machine transportation scattered bulk cargo transport. 2, the frame and carriage longitudinal beam adopts high-quality manganese plate welding and become, a dustpan and rectangular box was two. Have high strength, strong lifting force, stiffness and toughness, good bearing capacity is strong, not permanent deformation. 3, sophisticated technology, main parts adopt advanced equipment and longitudinal beam has a fully automatic submerged arc welding, the assembly machine for accurate assembly of shaft and plate spring.
Low flat-panel semi-trailer
Low flat-panel semi-trailer vehicle parts no column board, wide range of USES, mainly used in long-haul freight transport. Series of semi-trailer frame girder structure for wear, longitudinal beam adopts flat type of gooseneck. Web height from 400 mm to 400 mm, longitudinal beam adopts automatic submerged arc welding welding, the frame adopts shot blast, beam through the longitudinal beam and the welding as a whole. Tandem dry plate spring and suspension bearing form, reasonable structure, strong rigidity and strength, is used to impact the bearing load. Low flat-panel semi-trailer is usually used to transport heavy vehicles (e.g., tractors, buses and special vehicles, etc.), rail vehicles, mining machine forestry machinery, agricultural machinery, such as excavators, bulldozers, loaders, paver, cranes, etc.) and other heavy goods, its center of gravity is lower, the better the stability and safety, transport overheight cargo and overhead obstacles by the stronger the ability. Low flat-panel semi-trailer structure and load plate semi-trailer usually adopt concave beam (or well type) frame, frame front for both gooseneck (goose segment anterior portion of traction pin connected to the tractor traction saddle, after the gooseneck end connected to the semi-trailer frame), the middle for the goods (frame the minimum section), the back-end for wheel (wheel). In low flat-panel semi-trailer loads on machinery and equipment, usually from semi-trailer back-end loading machinery and equipment, namely by moving from the rear shelf surface mechanical equipment or remove the wheel, then the mechanical device fixed on the semi-trailer. Flat plate semi-trailer walking structures, the use of high strength steel international vehicle weight is light, and to ensure its ability to resist distortion, seismic resistance, turbulence, meet different pavement bearing capacity.
CangShan type semi-trailer
CangShan type semi-trailer truck parts adopt the fence structure design of semi-trailer. It is mainly used for agricultural and sideline products and other light bubble is the transportation of the goods. 1, models and combining user goods category fence structure design process, the reasonable design, satisfy the load cases sufficient to reduce car weight, simple structure, convenient disassembly, for users reduce the investment cost, create more profit value. 2, the frame: the longitudinal beam and the whole throughout the beam compound and into a space frame structure. Can balanced frame strength, stiffness, toughness, carrying capacity is strong, not permanent deformation. 3, series CangShan type semi-trailer frame are all wear girder structure, the longitudinal beam adopts flat type or gooseneck. Web height from 400 to 500, longitudinal beam adopts automatic submerged arc welding welding, the frame adopts blasting treatment, beam through the longitudinal beam and the welding as a whole. 4, suspension system: a new type of suspension system, high strength, impact resistance is strong; Rod shaft axis load balance, system design, in the process of running frequent turbulence, reduce the friction and sliding distance tire and ground, effectively reduce the tire wear, adjustable lever at the same time, can adjust the wheelbase, effectively avoid partial running-in chew wheel tires phenomenon.
Container semi-trailer
Container semi-trailer semi-trailer container loading parts of structure. Is mainly used in ships, ports and routes, roads, hubs, Bridges, tunnels, multimodal transport logistics system matching. 1, dedicated to all kinds of container transportation. Can be long-term repeated use, have enough strength. 2, use container transport goods, can be directly on the shipper's warehouse loading and unloading, shipped to the consignee's warehouse midway replacement car, ship, the goods do not need to change from the inside out. 3, can undertake rapid loading and unloading, and can conveniently change directly from a transport to another transport. 4, to facilitate full and empty, meet the personalized needs of customers. According to the customer need to tooling to ensure, stable quality, reliable performance. Container semi-trailer is a special transport container transport trailer. Container transport development initial period, because of less container load, quantity is not big, use normal truck carrying. Since the 1960 s, with the rapid development of container transportation, countries have developed into a specialized shipping container car. The size of the container trailer loaded parts according to the standard container size, and in the position of the corresponding to the four corners at the bottom of the container is equipped with fixed container twist lock device. Special transport trailer carrying container. In the corners of loading station is equipped with fixed container twist lock device. Usually takes half hanging, hanging and double hung, with half a hanging. Half hanging type and plate type and framing, the former has a flat goods, also can be used to a common grew up cargo; The latter is not available, the container loaded on the chassis frame, by the twist lock device fixed as the strength of the semi artifacts.
Tank semi-trailer
Tank semi-trailer cargo semi-trailer parts structure for the tank structure. Mainly used to transport the liquid, bulk cargo and bulk cement, etc. 1 series is divided into a tanker, tank car, Concrete Mixer Truck, powder materials, Bulk Cement Truck, water supply and so on. 2, tanks through the 3 d design, advanced processing technology. Chassis of various manufacturers use special chassis, advanced technology, reliable in performance. Equipped with canned container truck. Advantages: high efficiency of loading and unloading transportation. Ensure the quality of goods. To transportation safety. Reduce labor intensity, improve the conditions of loading and unloading. Packaging material saving, save Labour. Reduce the transportation cost. Tank car: shipping fuel oil, lubricating oil, acid, alkali, water, food and beverage, etc. Powder tank car: shipment cement, flour, powder, etc. Tank car: shipment such as nitrogen, argon gas, liquefied petroleum gas (LPG), particle tank car: shipment of granular grains, beans, plastic and other granular materials. Other special tank car: concrete mixer truck, water sprayer, sweeper, etc. Tank car according to the working pressure of the container can be divided into: the low pressure tank (tank under internal pressure generally below 0.09 Mpa. The main water, light fuel oil, etc.) in medium pressure tanker, tank under internal pressure is commonly 0.147 0.294 Mpa. The main pack caustic, asphalt, etc.) high pressure tank (tank under internal pressure is commonly 1.177 3.532 Mpa).