It is still necessary to prepare a pair of cotton gloves before driving a medical waste transfer vehicle in the snow. If you need to replace the tires in a stormy weather, you can keep your hands cold. The rainy days of winter can't use wet rags to wipe the windows. This will only make the ice on windows shine more and more. In winter, one or two dry rags will be prepared in medical waste transfer vehicles . necessary. In the north, the winter air is relatively dry, and the wind is still relatively large. Those who do not have the quality are not required to inject unburned cigarette butts into the engine compartment or blow the dead branches into the engine compartment to cause a fire. Preparing a fire extinguisher is also an urgent need. 1. The description of the use of medical waste transfer vehicles should be based on a detailed introduction to the method of defogging. One of them is to adjust the air outlet of the air conditioner to the position of the window, and then turn on the cooling switch of the air conditioner. Compressors work so that dehumidification can be achieved. However, it should be noted that at this time, the driver should adjust the temperature knob to the warm air position. This is not only to achieve the purpose of defogging but also to keep warm. 2. If some vehicles are snow models with automatic transmission belts, driving in the snow is simply too convenient. It is certainly correct to press the snow days. If the vehicle is not in the snow mode manual auto gearbox, you have already tried the D-block start but it is still not OK, then you can try to change to the second gear manually, because the torque of the engine at this time It is not as big as a 1st gear, so it is also very useful for tire grip. Using a manual gear, you can hover the first gear slowly. If you feel that the tire has started to slip and the body has moved forward, this is a case where you can immediately mount the 2nd gear. Next, we can not consider the situation where the speed is low to allow the body to appear jittery. As long as we continue to refuel, the smooth start will be one after the other. 3. When driving a medical waste transfer vehicle on a snowy day, using a big foot brake is a foolish act. Even if your car has an ABS system, it will not guarantee you to brake properly on a slippery road. The trajectory approach. The most correct way is to lightly lift the brakes. Practical and convenient! (Text / Sun Ni)
The Plate Flange is a kind of the flange,which weld with the end of the pipe through inserting the pipe into the plate flange hole.The sealing surface of plate flange is flat face.
Production Size:DN10-DN3000
Pressure range:PN2.5,PN6,PN10,PN16,PN25
Production Standard:BS,JIS,GOST,ANSI,DIN,GB
Main Material of parts:
A105,20#,Q235,16Mn,A350 LF1,LF2,CL1/CL2,LF3 CL1/CL2,A694 F42,F46,F48,F50,F52,F56,F60,F65,F70;A182 F304,304L,F316,F316L,321,18-8,A182F1,F5a,F9,F11,F12,F22,F91,A182 F12,F11,16MnR
The cost of Plate Flange is very low,it is very easy to produce,So it is widely used to many industries.
Plate Flange Plate Flange,Carbon Steel Plate Flange,Alloy Steel Plate Flange,304L Plate Flange CANGZHOU HENGJIA PIPELINE CO.,LTD , https://www.hj-pipeline.com
