Except the Plastic Mould Heater and Mold Thermoregulator ,Plastic Mould Temperature Controllers are the most important equipment during plastic molding industry. During plastic molding production, using the heating and cooling unit of the mould temperature comtroller to adjust and provide a certain stalbe temperature of the plastic mould.
We can provide two types of plastic mold temperature controller, they are water type mould temp. controller and oil type mold temp. controller. The Water Type Mould Temperature Controller can provide maximum 120℃, and Oil Type Mould Temperature Controller can get 200℃ for plastic mould. The machine will reduce the mold cycle time to increase production efficiency and ensure a perfect end products quality.
Mould Temperature Controller,Water Type Mould Temperature Controller,Oil Type Mould Temperature Controller,Plastic Mould Temperature Controller,Plastic Mould Heater,Mold Thermoregulator Ningbo Rainbow Plastics Machinery Co., Ltd. , https://www.injection-machine.com
1. After closing the quantitative packing scale, it is necessary to clean the measuring part of the equipment first. For example, if the package is dusty material, then it is necessary to clean the turntable and the feeding port in time, so that the next operation will not be affected. Guarantee the accuracy of measurement;
2, for the quantitative packaging scale sealing device, but also to clean in a timely manner to ensure the appearance of the seal;
3, for the quantitative packaging scale cigarette lighters also need to be cleaned in time to ensure that the cursor tracking error does not occur;
4, in the bagging material falling on the tray must also be cleared in time to ensure the cleanliness of the machine;
5, for the control box should also be cleared in time, so as not to fall into the dust to control the electrical box bad contact; 
With regard to the maintenance of quantitative packaging scales, the following aspects must be noted:
1, should pay attention to whether the electrical parts of the water, or the phenomenon of corrosion, always keep it clean and tidy, in case of electrical failure;
2. Lubricate the components of the quantitative packaging scale regularly to ensure the normal operation of the packaging scale;
3. Regularly check the amount of the packing scale to check for loose fasteners.
Where does the cleaning of the quantitative package scale begin?