There are many people who call sweepers, sweepers, sanitation sweepers, etc. As sanitation work continues to increase, many cities have already taken advantage of mechanical sweeping instead of manual sweeping, but for sprinklers, garbage trucks For other sanitation vehicles, the operation of the sweeper is relatively complicated, that is, some small problems will be more troublesome than sprinklers, etc. In order to avoid these minor problems causing minor troubles to cause the vehicle to not work properly, it will bring sanitation work to the city. Trouble, we must understand some of the small details about the operation or use of the sweeper. 1. There are usually sweeper designs on both the left and right sides of the sweeper. The operator must adjust whether the left and right scoops work at the same time according to the actual situation. According to the working environment of different road sections, whether to spray water to reduce dust is needed. In the work, properly choose the function of the cleaning vehicle, which can save costs, save fuel and avoid waste 2. Each function button of the sanitation sweeper is on the operation panel in the cab. The transition time between the buttons is about 5 seconds. Do not press it frequently. When it is found that the hydraulic components of the sweeper cannot work properly, the oil circuit and circuit of the sweeper must be inspected. The troubles that can not be solved by the sweeper driver himself must be promptly sent to the maintenance point for professional maintenance, and they must not be operated on their own, so as not to cause artificial damage to the sweeper spare parts. 3. The sweeper driver must have a certain sense of responsibility. He must pay close attention to the abnormal work of the sweeper during the work. After the work is completed, the sweeper must be cleaned and cleaned. Some dust in the dustbin of the sweeper needs manual handling. In fact, the road sweeping vehicle is a special type of special environmental sanitation vehicle that has emerged in recent years. It uses the main and auxiliary engines to provide power for cleaning and cleaning of the sweeper. The control valve also divides the main and the auxiliary. The power of the main valve comes from The main engine manages the running of the vehicle, the tilting of the carriage and the opening and closing of the rear door, the power of the auxiliary valve from the secondary engine, the management of the sweeper, the work of the sweeper and the sucker. As operators of sweeping vehicles, in addition to mastering the operational skills of general vehicles, they must master the special function operations of the sweeper to avoid mistakes and damage the sweeper parts. Above we just briefly analyzed some points that need attention in the early operation of some cleaning vehicles and hope to be helpful to everyone.
Trafimet Type Plasma Cutting Torch have a complete range of air and water cooled plasma cutting torches. S45 Low Frequency Air Cooled Plasma Cutting Torches, A140 Air Cooled Plasma Cutting Torches, S75 Air Cooled Plasma Cutting Torches, CB150 Air Cooled Plasma Cutting Torches, AW201 Air Cooled Plasma Cutting Torches. Unique appearance, imitation hand-shaped handle, a high degree of flexible cables, accessories with low price. Plasma Consumables can be used long time.
Trafimet Type Plasma Cutting Torch Trafimet Type Plasma Cutting Torch, Air Cooled Plasma Cutting Torch, A140 Air Cooled Plasma Cutting Torch,A141 Air Cooled Plasma Cutting Torch,CB150 Air Cooled Plasma Cutting Torch EDAWELD COMPANY LIMITED , http://www.jsedaweld.com