Others Series Products
11.Die Casting Machine Capacity from 50 tons to 3000 tons.
Other Series Products Aluminium Die Casting Accessories,Mould Part Series Products,Die Casting Lamp Part,Alloy Die Casting Series Products Ningbo Bowei Mould Metal Products Co., Ltd , http://www.bwmoulds.com
â—† 0 ~ 3000A can be a long output current â—† test equipment can be synchronized operation time â—† normally open, normally closed contact automatic identification â—† can only check several series simultaneously, improve efficiency <br> <br> Performance Features:
â—†Using beautiful PVC panel â—† Directly display the test value of primary current and secondary current, which is convenient for test observation and recording.
â—† High measurement accuracy 0.2 grade â—† Long-time high-current generator has large power and strong load capacity â—† Small size, light weight, and volume is only 30% to 70% of similar products, which is very convenient to carry.
Third, the operating instructions:
(1) After wiring is complete, check it again to see if there is a wiring error and if the connector is in good contact.
(2) During the test, if there is a fire, and there is no display or other abnormal phenomenon when starting the machine, immediately turn off the power and recheck the wiring.
(3) In the actual wiring, the current output terminal should form a loop, otherwise the instrument will not output current.
(4) The current riser has a random output wire; the output external copper wire is selected according to 10A/mm2. (Standard for two 1 meter test lines)
(5) The equipment capacity is designed according to the short-term work of 5 minutes. If it is used for batch testing, the working time should be less than 2.5 minutes. After waiting for 10 minutes, the next work will be carried out. If the temperature rise (30 minutes -24 hours) should be prepared according to long-term temperature rise.
1.High Quality Die Casting Production series products.
2.Cast aluminum die cast parts in many Aluminum Die Casting for Auto Parts, Aluminium Die Casting for Communications, Lamp Part Series , Water Pump Part Series, Power Tool Series , radiator part series, anti-static flooring products and Other Series Products.
3.Die casting consulting for Aluminum Die Casting part design and die casting tooling.
4.High quality surface on your aluminum die casting products.
5.Close dimensional tolerances on products die casted in aluminum.
6.Production on aluminum die cast parts will begin in less than two weeks typically..
7.Competitively priced aluminum diecast parts.
8.Various sizes and types of aluminum diecasting capabilities for your needs.
9.A360, A380, A383 and A413, and all Aluminum Die Cast Alloy Parts comply with the EU RoHS standards.
10.Aluminum Sand Casting Parts to Aluminum Die Casting Part conversions.
First, the main function: