Main features: Core Drilling Machine,Core Bit,Core Hole Drill,Core Bit Set JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.xitecdrillingwx.com
1. The drilling machine has high input power, high output torque and strong drilling capacity.
2. The output speed range of the drilling machine is wide, which is suitable for both engineering geological investigation and diamond core drilling.
3. The drilling machine is equipped with an open box rotator for easy operation of the orifice.
4. The utility model has an oil pressure feeding mechanism and a ball clamp type clamping mechanism at the upper end of the vertical shaft, which can improve the drilling efficiency and reduce the labor intensity of the workers.
5. The drilling rig is equipped with active drill pipe, which can realize non-stop reversing, with high efficiency, safety and reliability.
6. The drilling rig adopts the double plate normally closed friction clutch, which is flexible in opening and closing and convenient in operation and adjustment.
7. The gear box of the drilling rig adopts the structure of automobile gear box, with single handlebar speed change and interlock mechanism, which is convenient for operation.
8. The drilling machine is separated from the water pump, and the pump and the drilling machine are separately equipped with power, which can improve the output torque of the drilling machine, especially when entering the deep hole for drilling, there will be no contradiction in the use of the water pump due to the decrease of power, so as to avoid accidents in the hole.
9. The drilling rig is compact in structure, small in volume, light in weight, and the largest part is less than 100kg, which is convenient for disassembly and handling, and suitable for working in hills or mountains.
Part of the sewage suction truck is different from other ordinary vehicles when turning. First of all, the tank of the sewage suction truck is loaded with liquid or semi-liquid substances, and in order to facilitate unloading, the suction tank of the sewage suction truck generally has no anti-wave plate. However, when the sewer truck is steering, the sewer water will be concentrated on one side due to inertia and centrifugal force, causing the gravity center of the sewer truck to change. If the suction truck drastically turns at high speeds, it is prone to rollover. How to avoid the sewage suction car rollover? Let the technical personnel of Dongfeng Sewage Sewage Vehicles give everyone a talk.
Don't try to combine the line when the suction truck is in a bend or turn. Because the body of the sewer car itself is in an unstable state, this instability will be exacerbated if the line is attempted. If the sewer truck is driving on a mountain road, it is especially necessary to avoid this situation.
If the curve is wide enough, you can follow the principle of “cutting outside and insideâ€, or you can call it outside and inside. The radius of the arc that passes through in this way is greater than the radius of the actual curve, that is to say a more sleek turn. The specific method of operation is:
1. Sewage suction truck If the vacuum suction truck is turning right, you can try to stick to the middle of the road before entering the bend, and stick to the roadside as much as possible in the bend. Of course, there is no non-motorized vehicle or pedestrian on the roadside. When you come out of the corner, you slowly drive to the right.
2. Sewage suction truck If the vacuum suction truck is turning left, you can stick to the roadside before entering the bend. When you enter the bend, you can stick to the middle. The premise is that there is no non-motorized vehicle or pedestrian on the roadside. At the corner, they leaned to the right again.
In short, when the sewage suction truck turns, when the situation permits, it is necessary to enlarge the turning radius angle as much as possible. The larger the radius is, the better, and the slower the speed is, the better the steering wheel is. In this way, it is possible to effectively reduce the sewage contained in the sewage suction truck because the inertia and centrifugal force are concentrated to one side, so as to ensure the stability of the vehicle body of the sewage suction truck and avoid the risk of side rollover.
Xiagong Chu Sheng Special Vehicle
Contact: Manager Wang Tel.