Sauer-Danfoss has developed the first load-sensing valve for low flow range. The new PVG16 valve facilitates the integration of load sensor system design and electro-hydraulic actuator technology. Developed from Sauer Danfoss' existing PVG technology and components, the PVG16 is rated for up to 17.2 gallons / minute and working port pressures up to 5800 psi. Sauer-Danfoss said the hydraulic valves are mainly used in municipal vehicles, agricultural equipment, small cranes and construction machinery. Sauer-Danfoss PVG product marketing manager, said: "to meet the emission control and functional safety requirements under the premise of the hydraulic equipment to achieve higher efficiency, you need advanced system design and performance to achieve.Therefore, the use of load transfer The advantages of sensing the valve are obvious, that is more durable, more energy efficient, superior controllability and safety. Sauer-Danfoss The new PVG16 is a low-flow, load-sensing hydraulic valve rated at 17.2 gallons / minute with a working port pressure of up to 5800 psi for municipal vehicles, agricultural equipment, small cranes and construction mechanical. Sauer-Danfoss sees the PVG16 valve as the next step in a PVG technology platform development strategy. With the modular PVG16 valve design, valves can be designed using established modules in the PVG design database. For example, PVG16 valve pump inlet module and end plate the same size and PVG32 PVG16 valve through the custom valve manifold integration, from simple to complex to achieve all the features. Clausen said: "From a cost and efficiency point of view, the valve banks need to be set up to meet the flow requirements for each function of the machine." The modularity of the low-flow PVG16 valve allows for more precise functional matching than ever before. " PVE6 is a new type of actuator that provides an electrically controlled hydraulic platform for the control valve. The actuator incorporates a microcontroller closed-loop control that enables spool valve control and embedded fault monitoring and high temperature resistance monitoring of temperature changes. Sauer-Danfoss PVG valve series also includes PVG32, PVG100 and PVG120, providing flow rates up to 63.4 gallons / min. Asphalt mixing plant is one of the key equipment for road construction. It is mainly used in the production of asphalt mixture for paving road surfaces. Asphalt mixing plant consists of a number of parts, including dosing system, dryer, agitator, dust removal system, fuel system and so on. Asphalt Mixing Plant,Mixer Plant,Asphalt Mixing Bitumen Equipment,Asphalt Paving Equipment BituRock Science & Technology (Jiangsu) CO., LTD , https://www.biturockequipment.com
The batching system is one of the core parts of Asphalt mixing plant. It is responsible for adding various raw materials to the blender in a certain proportion. These raw materials include asphalt, sand, gravel and other additives. The batching system usually consists of a weighing sensor, a batching bucket and a batching transfer device.
The dryer is another important part of the Asphalt mixing plant. It is mainly used for drying raw materials such as sand and stones. There are heating elements and rotating agitators inside the dryer, which can make the raw materials fully heated and mixed evenly.
Mixer is one of the core parts of Asphalt mixing station. It is responsible for mixing various raw materials together to produce a high quality asphalt mixture. The agitator usually consists of multiple mixing blades, which can fully mix the raw materials to ensure the stable quality of the asphalt mixture produced.
Dust removal system is one of the important components of Asphalt mixing plant. It is mainly used to collect dust and exhaust gases generated during the production process. The dust removal system is usually composed of multiple filters, which can effectively filter out dust and exhaust gas to ensure a clean working environment and air quality.
Fuel system is one of the key parts of Asphalt mixing plant. It is responsible for providing the fuel to power the Asphalt mixing plant. The fuel system usually consists of a fuel pump, a fuel filter and a fuel injector.
Asphalt mixing plant is a kind of high efficiency asphalt mixture production equipment, widely used in road construction field. It has the advantages of high automation, high production efficiency, stable product quality and so on, and provides a strong support and guarantee for road construction.
ã€Print】 ã€Close】