The Elastic Warping Machine, also known as spandex warping machine, is a textile machine used to produce elastic fabrics. It is designed to warp a wide range of elastic materials, including spandex, Lycra, and other stretchable fibers.
The Elastic Warping Machine is widely used in the production of a variety of elastic fabrics, including swimwear, athletic wear, lingerie, and medical garments. It is a highly efficient and cost-effective way to produce high-quality elastic fabrics with consistent performance and durability.
Elastic Warping Machine,Horizontal Warper Advantage,Vertical Warper Advantage,Spandex Warper Specification suzhou cotex international Co.,Ltd , https://www.cotexmill.com
Plastic or metal housing, cylindrical, square, fork, glass or plastic optical fiber direct detection system, long detection distance, maximum 100m, accurate and reliable detection of opaque objects, good resistance to adverse conditions (dust, scattering light guide) reflective system detection distance is medium , 15m maximum, easy to install, detect opaque objects or non-reflective transparent objects; Polar reflection system can detect reflective objects Diffuse system detection distance is short, up to 2m, depends on the reflection coefficient of the object, installation and setup is simple, detectable transparent , reflective or translucent objects, requiring a clean environment Diffuse system with background suppression function is insensitive to background objects, the detection distance is independent of the color of the object relay or solid state output, there are analog (4-20mA) The output of the special series of products can be selected: three types of time delay, separation amplifier, sensitivity adjustment wiring: screw terminals, connectors, cable leads, the highest degree of protection for the IP67Design18 the most widely used standard in the market, the first generation Ø18 and background suppression.
Step/method 1, self-adjustment. When using the photoelectric switch of the winding machine, please check whether the switch itself is intact and the appearance is good.
2. When the EL130 photoelectric switch is used to avoid shields, for some goods such as colored goods, less reflective goods, goods with large gaps between small parts, transparent goods, or under sunlight or halogen light irradiation, photoelectricity The switch will have no effect.
Photoelectric switch working principle:
3, height adjustment when the top of the ITRA8402-A trough width of 6mm trough type photoelectric switch sensing goods, the photoelectric switch can be properly corrected to direct the direction of the goods; if not effective, can open the photoelectric switch shell Adjust the sensing distance, adjust the sensitivity knob clockwise, and rotate clockwise until reliable sensing is achieved.
4, direction adjustment, photoelectric switch sensing goods or motor outside the dial, the counter-clockwise adjustment sensitivity knob, counterclockwise rotation, until it reaches the sensing of foreign objects, and then it is worth noting that is strictly prohibited live operation ! be careful!
The machine consists of a creel, a warp beam, a tension control system, and a warping section. The creel holds the spools of elastic yarn, which are then fed into the warping section. The tension control system ensures that the yarn is evenly distributed and maintains a consistent tension throughout the process.
The warping section consists of a series of rollers that pull the yarn through a series of guides and onto the warp beam. The elastic yarn is then wound onto the warp beam, creating a tightly-woven fabric that can stretch and recover without losing its shape.
Photoelectric switch instructions: