Nitrogen Generator For Heat Treatment Nitrogen Generator For Heat Treatment,Industry Nitrogen Generator,Nitrogen Generator Installations,Nitrogen Psa Generators Laser Cutting Jiangsu Minnuo Group Co.,Ltd , https://www.jsmngroupcn.com
The main function:
The “Technical Measures for Preventing Capacitor Installations from Being Accidents†stipulates that, for high-voltage shunt capacitors, the capacitance of a single capacitor in a capacitor bank should be regularly measured. It is recommended to use a measurement method that does not remove the connection cable, and to avoid the occurrence of bushing due to the disassembly and connection of the connection cable. The failure of the casing to leak oil due to stress.
Specially developed for the substation site to measure the capacitance of a single capacitor in parallel capacitor banks and SCV devices, it has the following functions:
* Do not take off the wire and measure the capacitance of the parallel capacitor or the collective capacitor.
* Do not take off the line to measure the inductance of the reactor and the wave trap.
* Do not remove the transformer's inlet capacitance, generator inlet capacitance, etc.
* With a parallel (discharge) resistance measurement function * can compensate for the low output voltage of the capacitor table and cause a low failure detection rate.
* Simultaneous display of voltage and current waveforms and phases, calculation of measured capacitor power loss.
One hundred test card - fully automatic capacitive inductance tester due to the use of standard capacitors, synchronous capacitor sampling technology, can be subject to power supply voltage fluctuations; plus the measurement process is fully automatic, to avoid the error caused by manual operation, so it has a stable Good, repeatable, accurate and reliable features.