The biomass burning machine needs to work under negative pressure. At the same time, the ID fan must be installed to ensure the negative pressure. If it is applied to aluminum melting furnace, greenhouse heating, drying room and other working conditions, it can be operated at slightly positive pressure. However, it is necessary to ensure the smooth flow of the flue; the cross-sectional area of the exhaust outlet and the power of the induced draft fan will be carried out according to the requirements specified by the engineering department of our company.
It must be equipped with a special operator to operate, the operator must be guided by the machine can operate the machine. If the product is used in a boiler, it should be submitted to a qualified boiler installation company for installation. If there is a size deviation due to the size of the burner mouthpiece, the size of the boiler's crater must be corrected. The product must be reported to the local boiler inspection office for approval. Qualified boiler maintenance unit. Biomass Burner,Biomass Granule Burner,Biomass Burning Furnace,Biomass Fuels Furnace Jinan Shanghangda Machinery Co., Ltd. , https://www.jnwoodmachine.com
According to the statistics of the Japan Forging Machinery Industry Association (Japan Forging), in June Japan's forging machinery manufacturers' orders increased by 1.4% year-on-year, totaling 26.865 billion yen, and export orders 13.931 billion yen, a year-on-year increase of 17.3%.
In terms of product categories, the stamping category was 17.154 billion yen, up 12.1% year-on-year; the sheet metal category was 5.18 billion yen, down 13.9% year-on-year. Among them, small-sized stamping machines surged 64.1% year-on-year. In the sheet metal products, punches decreased by 22.8% year-on-year, press brakes decreased by 19.4% year-on-year, and lasers and plasmas increased by 3.3% year-on-year.
Geographically, orders from Japan were 8.403 billion yen, a decrease of 11.0% year-on-year, and negative growth for six consecutive months. On the export side, orders from China increased by 75.7% year-on-year, and orders from Europe increased by 63.1% year-on-year, both significantly increasing. Orders from North America increased slightly by 1.4% and Southeast Asia grew by 17.1%.