Guangdong high altitude equipment, Caster aerial working platform, aerial platform rental

Custer tells you about work at heights

1. Check if there is any sign of sinking or standing water in the foundation part; check whether the grounding system meets the requirements; then check the high-altitude operation in the high-altitude operation project. (The spring) shall be complete and effective; the bottom cage shall be tightly closed without damage; The bottom entrance and exit should have protective sheds.

2. Check the frame structure of the aerial work, should check the foundation and the standard section connection bolt fastening, the bolt according to the provisions of the set of double nuts or spring pads; all parts of the weld intact without cracks; attachment rods should be in accordance with the requirements of the specification Material and specifications settings should not be arbitrarily changed.

3. The mechanical transmission system of the lifting platform can be divided into closed and open type. Its speed change part and the centrifugal brake part of the conical speed governor are closed, and the other parts are open type.

4. Work at height always pays attention to every detail. Especially from time to time to check.

Continuous Foaming Machine

CNC CONTINUOUS HORIZONTAL Foaming Machine can be used for continuous producing Flexible Polyurethane Foam(maxfoam),
which density is 9~50KGS/M³. It can be automatic cutting the foam into difference sizes
which is according to client`s requirement. It can be realized numerical control with accurate
and convenient ration during the whole production. It becomes more easily and stable to
operate the machine.
ï‚  Computerized control system
It can be realized numerical control during the whole production. It is very easy to
operate with its humanization consideration design. It is able to store 100 formulations in
advance.
ï‚  Automatic formulation function
The computer can be automatic to generate formulation for your reference and
calculate the dosage of material if you input the density and color which you need. The
computer can be automatic to check if the formulation is correct when you give the input of
material.
ï‚  Costing function
The computer can be automatic to display the input of chemical material and the output
of foams in each foaming produce.
ï‚  Printing function
All information including the formulation, the input of chemical material and the output of
foams can be printed. The exact data can be used to strengthen management.
ï‚  Electronic metering system
The metering system is adopted the advance electronic metering pumps from U.S.A.
and the monitoring equipment. Through computer, it can display formulation`s dosage of 12
groups` chemical material and actual supply in figure or diagram. The metering system can
be automatic to adjust it with great precision when the actual supply cannot meet the
formulation requirement. It is the base to produce the good foam and to reduce the
unnecessary wastage with this function.
ï‚  High speed mixing system
It adopts two steps mixing with low-pressure and high-speed. This can make the
foam`s air hole fine and smooth. It presets cycle cooling and automatic cleaning functions.
ï‚  Adjustable oven system
The width of two moving side wall can be adjusted for producing difference width foam.
The height of six steps raising platform can be adjusted for producing difference density
foam.
ï‚  Automatic cutting system
It is computerized control. It can be changing the cutting length in any time. The degree
of accuracy can be equal or less than 1mm.