During the use of the grouting pump, certain conditions will surely occur. If some faults can be found in time and corrected in time, it will have a very positive effect both on the life cycle protection of the injection pump and the protection of the use effect. What are the solutions to the problem of pump injection when the pump is in a condition? Environmental Protection Equipment Cutting Machine
Metal Laser Cutting Machine is a metal cutting equipment mainly produced by our company. It is specially used for cutting and processing metal materials such as sheet metal, stainless steel and carbon steel. The high-power metal laser cutting machine can be transformed by light energy. The heat of the beam heats the material to vaporization quickly, removing the deformation of the workpiece, plus the auxiliary gas (such as oxygen, carbon dioxide, etc.) adapted to the material to avoid the oxidation reaction during heating, making the steel plate black and yellow, and blowing The slag that may remain in the cutting seam when cutting.
Electronic Element,Environmental Protection Equipment Cutting Machine,Laser Metal Cutting Machine Equipment,Closed Fiber Laser Cnc Cutting Machine Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachines.com
Fault 1: The pressure pump is damaged
Cause: The voltage is too high and the pressure is too high.
Fault solution: Replace the pressure pump.
Failure 2: high pressure injection pump can not increase
Cause: The bucket was blocked.
Fault solution: Remove the residue from the barrel, remove the obstructions in the barrel, and loosen the joint at the end of the pump to remove the pump interior and the ball spring.
Fault 3: Loose connection between the drill holder and the fuselage
Reason: The high pressure injection pump will cause the drill to loosen due to body vibration during the operation.
Fault solution: Take out the drill, use the electric drill to remove the internal gear, and lock it.
The failure of the pressure pump, the looseness of the drill holder and the joint of the fuselage, and the inability of the high-pressure injection pump to increase are common failures during the use of the injection pump. With the development of the injection pump, these failures have been well received. Solution. The use of each device must meet some difficulties, but as long as it is corrected in time, it is believed that this will minimize work injuries.
High-power metal laser cutting machine advantages:
The cutting precision is high and there is no problem with the deformation of the workpiece.
The cutting product is flat and beautiful.
Fast cutting speed, easy operation, safe and stable.
The cutting drawings are freely customizable, flexible in processing and adaptable.
