â— National II Â Â Â From July 1, 2004, the second phase of the National Vehicle Pollutant Emission Standard (Gbl8352.2, referred to as the National 2 Standard), which is equivalent to the European No. 2 Standard, has been implemented nationwide. All new fixed-type light vehicles must comply with Standard requirements, and stop reporting and approval of light vehicles that meet the first phase of the National Vehicle Pollutant Emission Standard (equivalent to the European Standard No. 1 or simply No. 1 Standard). The so-called National II standard means that the emission limits for carbon monoxide and hydrocarbons, nitrogen oxides and particulate matter are 2.2 g/km and 0.5 g/km. The so-called "National III Standard" refers to the third-phase limit of the national vehicle pollutant discharge standard (GB18352.3-2005, hereinafter referred to as the National III standard). According to reports, China's "National III Standard" is equivalent to the European III standard, and vehicles that meet the "National III Standard" can significantly reduce the pollutant emissions of bicycles, and its total discharge of pollutants to the "National II standard" vehicles About 40% reduction. The so-called National III standard refers to gasoline vehicles: HC: 0.66%; CO: 2.1%; NOx: 5%; PM: 0.1%. Diesel vehicles: HC+NOx: 0.56%; CO: 0.64%; PM: 0.05%. Â Â Â The National IV emission standard is the national fourth-phase vehicle pollutant discharge standard. The vehicle emission pollutants mainly include HC (hydrocarbon), NOx (nitrogen oxide), CO (carbon monoxide), PM (particles), etc. The application of technologies such as active layers of good catalytic converters, secondary air injection, and exhaust gas recirculation systems with cooling devices controls and reduces the standards for emissions of pollutants from cars to below specified values. The National IV standard is called "National Phase IV Motor Vehicle Emission Standard" and it is equivalent to the European "Euro IV Standard". In terms of emission control, the National IV standard motor vehicles need to further reduce 30%-50% of pollutants on the basis of State III to achieve compliance. At present, only Beijing, Shanghai, and the Pearl River Delta region in the Mainland have explicitly implemented the standard. In the future, the national IV standards will be implemented one after another. Research shows that an automobile pollutant that meets the national IV standard can be reduced by 50% compared with the same type III country standard. At the same time, the use of National IV vehicles in conjunction with National IV oil will reduce the total amount of pollutants emitted by the entire Pearl River Delta motor vehicle by 15%-20%.
At our factory outlet, we offer a wide range of hot-selling graphite moulds for casting. These moulds are manufactured using high-quality graphite materials, ensuring durability and long-lasting performance. Our graphite moulds are designed to withstand high temperatures and provide excellent dimensional accuracy for producing high-quality castings.
Some of our popular graphite moulds for casting include:
1. Graphite Ingot Moulds: These moulds are used for casting metal ingots, such as gold, silver, and other precious metals. They come in various sizes and shapes to accommodate different casting requirements.
2. Graphite Crucibles: Crucibles are essential for melting and pouring molten metal into moulds. Our graphite crucibles are highly resistant to thermal shock and have excellent heat retention properties.
3. Graphite Dies: Dies are used for casting complex shapes and intricate parts. Our graphite dies are precision-machined to ensure accurate and repeatable casting results.
4. Graphite Plates: Plates are used for casting flat or thin metal parts. Our graphite plates are available in various thicknesses and sizes to meet different casting needs.
5. Graphite Rings: Rings are commonly used for casting cylindrical or round-shaped metal parts. Our graphite rings are highly durable and can withstand high temperatures and pressures.
All our graphite moulds are carefully crafted to meet the highest quality standards. They undergo rigorous quality checks to ensure they are free from defects and can provide consistent and reliable casting results.
If you are looking for high-quality graphite moulds for casting, visit our factory outlet to explore our wide range of hot-selling products. Our knowledgeable staff will assist you in finding the right moulds for your specific casting requirements.
Graphite Mould,Graphite Bar,Graphite Plate Sheets,Graphite Ingot Mould Yixing Xingfeng Carbide Mould Co.,LTD , https://www.xfcmould.com