Sandwich Panel Machine is a integrated production line consisting of a Roll Forming Machine and a sandwich panel laminating system. The roll forming machine and the laminating system can be operated separately. The roll forming machine consists of decoiler, main body and post-cut equipment. The laminating system consists of feeding, glue, heating, laminating and post-cutting.
The line can produce single corrugated sheet, and can also produce the sandwich panel with rabbet joint and sandwich panel.
The sandwich panel machine has two different systems: Pu sandwich panel machine and EPS sandwich panel machine according the different laminating Technology.
Related Products:pu sandwich panel machinery.
Sandwich Panel Machine Sandwich Machine,Sandwich Panel Machine,Automatic Sandwich Making Machine,Sandwich Panel Roll Forming Machine HangZhou Roll Forming Machinery Co.,Ltd , http://www.m-rollformingmachine.com
K series: Pneumatic ball vibrator
GT series: Pneumatic turbine vibrator
R series: Pneumatic roller vibrator
SK series: Impact air hammer
1)Turbine type pneumatic vibrator
2)No lubrication only clean air is required
3)Low noise 60~75dBA
Feature:
1)Turbine type pneumatic vibrator
2)No lubrication only clean air is required
3)Low noise 60~75dBA
4)Compact size
Description:
A high speed range and eccentric working moments are combined in these Vibrators to produce a powerful vibration. The body is made from an extruded stove enamelled aluminium section and the hard coated
End plates enables the vibrator to be used in the food and pharmaceutical industries. The GT-turbine vibrators comply to current international noise regulations under factory test contitions.
Design:
The vibration is produced by the centrifugalforce of the postive and negative unbalance moments in the rotor, the rotor is supported on two heavey duty, prelubricated, matched shielded ball bearings, A special
Long life grease ensures a long working life. The inner and outer raceways of the bearings are designed so that the bearings can be easily replace using only a pin-wrench. The end plates are fitted with right-andleft-hand threads and self-locking.
Technical Parameters
Type
Frequency(V.P.M)
Vibration Power(N)
Air consumption(/min)
0.2Mpa
0.4Mpa
0.6Mpa
0.2Mpa
0.4Mpa
0.6Mpa
0.2Mpa
0.4Mpa
0.6Mpa
GT-10
27.500
35.000
37.500
0.840
1.390
2.400
46
80
112
GT-13
26.000
30.000
33.000
1.400
2.440
3.730
120
200
290
GT-16
17.000
21.500
24.000
1.220
2.090
3.160
120
200
290
GT-20
17.000
20.000
23.000
2.170
4.040
5.520
185
325
455
GT-25
12.000
15.500
17.000
2.120
3.510
5.070
185
325
455
GT-32
13.000
14.000
16.000
3.380
5.430
7.540
330
530
745
GT-36
7.800
10.000
13.000
3.300
5.000
7.150
330
530
745
GT-40
7.500
8.800
9.500
4.350
7.350
9.850
408
428
680
GT-48
5.800
7.500
9.700
4.950
7.750
10.6007
408
428
680
GT-60
4.758
6.530
8.515
5.700
9.800
11.150
505
600
920
Â
We have the following types:
K series: Pneumatic ball vibrator
GT series: Pneumatic turbine vibrator
R series: Pneumatic roller vibrator
SK series: Impact air hammer
1)Turbine type pneumatic vibrator
2)No lubrication only clean air is required
3)Low noise 60~75dBA
Feature:
1)Turbine type pneumatic vibrator
2)No lubrication only clean air is required
3)Low noise 60~75dBA
4)Compact size
Description:
A high speed range and eccentric working moments are combined in these Vibrators to produce a powerful vibration. The body is made from an extruded stove enamelled aluminium section and the hard coated
End plates enables the vibrator to be used in the food and pharmaceutical industries. The GT-turbine vibrators comply to current international noise regulations under factory test contitions.
Design:
The vibration is produced by the centrifugalforce of the postive and negative unbalance moments in the rotor, the rotor is supported on two heavey duty, prelubricated, matched shielded ball bearings, A special
Long life grease ensures a long working life. The inner and outer raceways of the bearings are designed so that the bearings can be easily replace using only a pin-wrench. The end plates are fitted with right-andleft-hand threads and self-locking.
Technical Parameters
Type
Frequency(V.P.M)
Vibration Power(N)
Air consumption(/min)
0.2Mpa
0.4Mpa
0.6Mpa
0.2Mpa
0.4Mpa
0.6Mpa
0.2Mpa
0.4Mpa
0.6Mpa
GT-10
27.500
35.000
37.500
0.840
1.390
2.400
46
80
112
GT-13
26.000
30.000
33.000
1.400
2.440
3.730
120
200
290
GT-16
17.000
21.500
24.000
1.220
2.090
3.160
120
200
290
GT-20
17.000
20.000
23.000
2.170
4.040
5.520
185
325
455
GT-25
12.000
15.500
17.000
2.120
3.510
5.070
185
325
455
GT-32
13.000
14.000
16.000
3.380
5.430
7.540
330
530
745
GT-36
7.800
10.000
13.000
3.300
5.000
7.150
330
530
745
GT-40
7.500
8.800
9.500
4.350
7.350
9.850
408
428
680
GT-48
5.800
7.500
9.700
4.950
7.750
10.6007
408
428
680
GT-60
4.758
6.530
8.515
5.700
9.800
11.150
505
600
920
Â
The whole machine is under control of PLC.
Model NO.: GT-10
Trademark: SMT
Transport Package: PP Bag + Box +Carton
Origin: China
Model NO.: GT-10
Trademark: SMT
Transport Package: PP Bag + Box +Carton
Origin: China
We have the following types: