Hard turbine speed door: set energy-saving insulation and efficient wind environmental seal in a new metal industrial doors , opening speed of up to 1.5meters per second , For applications that require frequent rapid opening of the logistics channel , Insulation thickness 0.7mm aluminum door intermediate polyurethane foam , total thickness 40mm door wide 185mm per meter weight 1.63KG, Having good thermal insulation and light weight impact strength and other characteristics , wind rating of greater than 12 and theft , The door is suitable for indoor and outdoor fast-track logistics and production , The door type for enterprises save a lot of energy due to air flow generated loss than ordinary industrial sliding doors shutter doors save energy about eighty percent , Rapid opening and closing of the door so that enterprises in the rotational speed of the production and logistics of the door is greatly improved enterprise logistics and production must pass through the channel selection and its use is directly related to the efficiency of production and logistics , This product has high reliability , practicality and easy operation and quick fix for me , Drive control using a stable energy-effcient and accurate hard to guarantee fast and reliable operation of the door system the door to ensure trouble-free operation every year more than 250,000 times
Turbine Hard High Speed Door, high speed spiral doors, aluminum high speed door, Aluminum Rapid Door, Aluminum Fast Door SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfahsrud.com
1.  Products Introduction
V-shaped return cleaners are mainly used for cleaning the belt around the bend pulley
 in return strand, which can insure the belt in clean condition and prevent bigÂ
materials adhered between pulleys and belts to damage the equipment.
 
 Â
2. Technical performanceÂ
² Unique design of scraper, 20°leading edge can remove scrap and water out ofÂ
the belt quickly and effectively;
² The scraper is made of Polyurethane, which is of abrasion resistance, longÂ
service life and low replacement cost;
² High-strength and anti-corrosive rigging turn buckles can adjust the cleaners precisely, freely and quickly,Â
which can be insured to work in optimized condition.
 Â
3. Model NumberÂ
          Â
For instance:  QSV-80 represents V-shaped non-load belt cleaner for belt width of 800mm.
4.  Selection Chart &Technical Parameter
Technical parameter table
Type
B
(mm)
L1
(mm)
L2
(mm)
L3
(mm)
L4
(mm)
L5
(mm)
H
(mm)
QSV-65
650
1200
950
365
940
434
200-400
QSV-80
800
1400
1150
365
940
434
200-400
Type
B
(mm)
L1
(mm)
L2
(mm)
L3
(mm)
L4
(mm)
L5
(mm)
H
(mm)
QSV-100
1000
1600
1350
365
1093
434
200-400
QSV-120
1200
1850
1600
450
1298
460
250-450
QSV-140
1400
2050
1810
450
1485
460
250-450
QSV-160
1600
2310
2060
630
1760
550
300-500
QSV-180
1800
2540
2280
630
1967
550
300-500
QSV-200
2000
2720
2480
823
2134
665
300-520
QSV-220
2200
3050
2800
823
2339
665
300-520
Â
Product DescriptionÂ
V-shaped non-loaded cleaners are mainly used for cleaning the belt around the bend pulley in return strand, which can insure the belt in clean condition and prevent big materials sticked between pulleys and belts to damage the equipment. This kind of cleaners have been widely used in kinds of industries, such as metallurgy, mines, cement and chemical engineering.Â
Technical
 performance 1.Unique design of scraper, which can clean scrap and water out of the belt;
2.The scraper is made of Polyurethane, which is of abrasion resistance, long service life and low replacement cost;
3.High-strength and anticorrosive rigging turn buckles can adjust the cleaners precisely, freely and quickly, which can be insured to work in optimized condition. 
 
Â
1.  Products Introduction
V-shaped return cleaners are mainly used for cleaning the belt around the bend pulley
 in return strand, which can insure the belt in clean condition and prevent bigÂ
materials adhered between pulleys and belts to damage the equipment.
Â
 Â
2. Technical performanceÂ
² Unique design of scraper, 20°leading edge can remove scrap and water out ofÂ
the belt quickly and effectively;
² The scraper is made of Polyurethane, which is of abrasion resistance, longÂ
service life and low replacement cost;
² High-strength and anti-corrosive rigging turn buckles can adjust the cleaners precisely, freely and quickly,Â
which can be insured to work in optimized condition.
 Â
3. Model NumberÂ
          Â
For instance:  QSV-80 represents V-shaped non-load belt cleaner for belt width of 800mm.
4.  Selection Chart &Technical Parameter
Technical parameter table
Type
B
(mm)
L1
(mm)
L2
(mm)
L3
(mm)
L4
(mm)
L5
(mm)
H
(mm)
QSV-65
650
1200
950
365
940
434
200-400
QSV-80
800
1400
1150
365
940
434
200-400
Type
B
(mm)
L1
(mm)
L2
(mm)
L3
(mm)
L4
(mm)
L5
(mm)
H
(mm)
QSV-100
1000
1600
1350
365
1093
434
200-400
QSV-120
1200
1850
1600
450
1298
460
250-450
QSV-140
1400
2050
1810
450
1485
460
250-450
QSV-160
1600
2310
2060
630
1760
550
300-500
QSV-180
1800
2540
2280
630
1967
550
300-500
QSV-200
2000
2720
2480
823
2134
665
300-520
QSV-220
2200
3050
2800
823
2339
665
300-520
Â
Product DescriptionÂ
V-shaped non-loaded cleaners are mainly used for cleaning the belt around the bend pulley in return strand, which can insure the belt in clean condition and prevent big materials sticked between pulleys and belts to damage the equipment. This kind of cleaners have been widely used in kinds of industries, such as metallurgy, mines, cement and chemical engineering.Â
Technical
 performance 1.Unique design of scraper, which can clean scrap and water out of the belt;
2.The scraper is made of Polyurethane, which is of abrasion resistance, long service life and low replacement cost;
3.High-strength and anticorrosive rigging turn buckles can adjust the cleaners precisely, freely and quickly, which can be insured to work in optimized condition.
Â
Â
Model NO.: QSV-80
Color: Blue, Orange, According to Your Requirement
Class: 1, 2, 3
Application: Belt Cleaning
Package: Oversea Package
Trademark: LBHI
Specification: CE, SGS, ISO9001, ISO14001, OHSAS18001
Origin: China, Taian
HS Code: 84313900
Model NO.: QSV-80
Color: Blue, Orange, According to Your Requirement
Class: 1, 2, 3
Application: Belt Cleaning
Package: Oversea Package
Trademark: LBHI
Specification: CE, SGS, ISO9001, ISO14001, OHSAS18001
Origin: China, Taian
HS Code: 84313900
V-shaped Belt Cleaner, V plough belt cleaner
5. Related products-- long distance belt conveyor system design, manfaucture, installation, maintenance, etc.
6. Â Certificates
V-shaped Belt Cleaner, V plough belt cleaner
5. Related products-- long distance belt conveyor system design, manfaucture, installation, maintenance, etc.
6. Â Certificates