Car Jack,Trolley Jack,Scissor Jack,Car Jack Lift jinyunzhaoshigongjuyouxiangongsi , https://www.zscarjack.com
wash, classifying and de-watering various sands.This sand washer adopt inclination of 15° , under the water
tub, three weir plates form the sediment pool, the screw head is immersed in this pool, the screw is driven by
electric motor through reducer rotating continuously, the fresh water is feeding from porous plate at bottom of
sediment pool, this machine have three functions of washing, de-watering, classifying.
Washing: The sand is feeding into the sediment pool from the feeding box, acting by rotating screw blade, the
sand is turning and rolling and grinding each other to eliminate impurity and water-air layer around sand to
facilitate de-water. The fresh eater rising current from the porous plate carry foreign matter to water surface
and overflow the weir plate, to finish washing processing.
Spiral Classifier-Product improvement
An automatic elevating apparatus is added to the discharge opening. The scoop in ball mill is eliminated
bringing more stable operation.
Spiral Classifier-Product Application
The overflow spiral blade is higher than overflow level, and the overflow spiral center is lower than overflow
surface. The high wire spiral classifier is applied in the classification of ore with particle size 0.83-0.15mm
Spiral Classifier-Working Principle
The grinded pulp is fed into tank from the inlet in the middle of settlement region, and the slurry classification
sedimentation area is under the inclined tank. The spiral with low speed rotation stirs the slurry, so that the fine
particles rise, and the coarse particles sinks to the bottom of tank. Overflow weir is above the bearing center
which is under screw shaft, and is underneath overflow end.
Spiral Classifier-Product Structure
High weir spiral classifier as the ancillary equipment of grinding to pre-classifying and check classifying is also
applied in de-mudding and dewatering.
Our spiral classifiers are widely used in the distribution of ore in closed circuits with ball mills, grading ore and
fine slit in gravity mills, grading granularity and flow of metal ore- dressing, and de-sliming and dehydrating in
washing. 
This product features simple structure, reliable working conditions and convenient operation. Because different
grains have different specific gravity and sedimentation rates in liquid, this product allows the fine ore to flow in
the water, while coarse ore sinks to the bottom.Â
Â
Model
Spiral diameter
 (mm)
Trough length
 (mm)
Spiral rotation
 speed
Production capacityÂ
(t/d)
Motor power
(kw)
Machine weight
 (t)
(r/min)
Back to sand
Overflow
ForÂ
driving
For
 lifting
FG7.5
750
5500
6-10
340-570
65
3
HM
2.7
FG10
1000
6500
5.0-8.0
675-1080
110
5.5
HM
4.43
FG12
1200
6500
5.0-8.0
1170-1870
155
5.5
1.5
8.7
FG15
1500
8400
4.0-6.0
1830-2740
235
7.5
2.2
12.5
FG20
2000
8400
4.0-6.0
3240-5400
400
11
2.8
20.5
FG24
2400
9210
3.6
4650-7450
580
15
3
25.6
FG30
3000
1250
3.2
11625
890
22
4
37.7
2FG12
1200
6500
5.0-8.0
2340-3740
310
5.5×2
1.5×2
14
2FG15
1500
8400
4-6.0
3660-5480
470
7.5×2
1.5×2
21.1
2FG20
2000
8400
3.0-5.5
7780-11800
800
11×2
2.8×2
36.5
2FG24
2400
9210
3.6
13600
1160
15×2
3×2
46.8
2FG30
3000
12500
2.0-3.2
14600-23400
1785
22×2
4×2
73
This product is mainly used for sand factory, electric pole factory, work-site of building and concrete dam to
wash, classifying and de-watering various sands.This sand washer adopt inclination of 15° , under the water
tub, three weir plates form the sediment pool, the screw head is immersed in this pool, the screw is driven by
electric motor through reducer rotating continuously, the fresh water is feeding from porous plate at bottom of
sediment pool, this machine have three functions of washing, de-watering, classifying.
Washing: The sand is feeding into the sediment pool from the feeding box, acting by rotating screw blade, the
sand is turning and rolling and grinding each other to eliminate impurity and water-air layer around sand to
facilitate de-water. The fresh eater rising current from the porous plate carry foreign matter to water surface
and overflow the weir plate, to finish washing processing.
Spiral Classifier-Product improvement
An automatic elevating apparatus is added to the discharge opening. The scoop in ball mill is eliminated
bringing more stable operation.
Spiral Classifier-Product Application
The overflow spiral blade is higher than overflow level, and the overflow spiral center is lower than overflow
surface. The high wire spiral classifier is applied in the classification of ore with particle size 0.83-0.15mm
Spiral Classifier-Working Principle
The grinded pulp is fed into tank from the inlet in the middle of settlement region, and the slurry classification
sedimentation area is under the inclined tank. The spiral with low speed rotation stirs the slurry, so that the fine
particles rise, and the coarse particles sinks to the bottom of tank. Overflow weir is above the bearing center
which is under screw shaft, and is underneath overflow end.
Spiral Classifier-Product Structure
High weir spiral classifier as the ancillary equipment of grinding to pre-classifying and check classifying is also
applied in de-mudding and dewatering.
Our spiral classifiers are widely used in the distribution of ore in closed circuits with ball mills, grading ore and
fine slit in gravity mills, grading granularity and flow of metal ore- dressing, and de-sliming and dehydrating in
washing.Â
This product features simple structure, reliable working conditions and convenient operation. Because different
grains have different specific gravity and sedimentation rates in liquid, this product allows the fine ore to flow in
the water, while coarse ore sinks to the bottom.Â
Â
Model
Spiral diameter
 (mm)
Trough length
 (mm)
Spiral rotation
 speed
Production capacityÂ
(t/d)
Motor power
(kw)
Machine weight
 (t)
(r/min)
Back to sand
Overflow
ForÂ
driving
For
 lifting
FG7.5
750
5500
6-10
340-570
65
3
HM
2.7
FG10
1000
6500
5.0-8.0
675-1080
110
5.5
HM
4.43
FG12
1200
6500
5.0-8.0
1170-1870
155
5.5
1.5
8.7
FG15
1500
8400
4.0-6.0
1830-2740
235
7.5
2.2
12.5
FG20
2000
8400
4.0-6.0
3240-5400
400
11
2.8
20.5
FG24
2400
9210
3.6
4650-7450
580
15
3
25.6
FG30
3000
1250
3.2
11625
890
22
4
37.7
2FG12
1200
6500
5.0-8.0
2340-3740
310
5.5×2
1.5×2
14
2FG15
1500
8400
4-6.0
3660-5480
470
7.5×2
1.5×2
21.1
2FG20
2000
8400
3.0-5.5
7780-11800
800
11×2
2.8×2
36.5
2FG24
2400
9210
3.6
13600
1160
15×2
3×2
46.8
2FG30
3000
12500
2.0-3.2
14600-23400
1785
22×2
4×2
73
Model NO.: FG-10
Energy Saving: Energy Saving
Warranty: 5 Years
Color: Grey
Customized: Customized
Condition: New
Model: Fg-10
Capacity: 150-600 T/H
Screw Diameter: 1000
Trademark: TSDC
Transport Package: Plastic Film
Specification: FG-10
Origin: Tangshan
HS Code: 84742020
Model NO.: FG-10
Energy Saving: Energy Saving
Warranty: 5 Years
Color: Grey
Customized: Customized
Condition: New
Model: Fg-10
Capacity: 150-600 T/H
Screw Diameter: 1000
Trademark: TSDC
Transport Package: Plastic Film
Specification: FG-10
Origin: Tangshan
HS Code: 84742020
This product is mainly used for sand factory, electric pole factory, work-site of building and concrete dam to