The soil compactness measuring instrument was developed by Top Instrument. The main models are TJSD-750 and TJSD-750-II. The same type of GPS soil compactness measuring instrument, which has a built-in GPS positioning and depth measuring system, can simultaneously display the soil compactness, measuring depth and geographical location, and can automatically generate the soil tightness of each measuring point after connecting with the computer. Solid curve. The current soil compaction tester can be used to measure soil compactness in the field. Compact soil can prevent the infiltration of water, reduce the utilization of chemical fertilizers, affect the growth of plant roots, resulting in reduced crop production.

There is an old saying in the countryside, which roughly means: sowing cotton and kicking a pit. The pits and pits mentioned here are not to say that the geographical soil is soft and that one foot can step on a pit, but because the cotton sowing needs to compact the above soil after the soil is buried, otherwise it is not conducive to growth. This is the most convenient nature. It is to step on one foot. This is the source of one foot and one pit.

In Xinjiang, there are large areas of cotton cultivation. In recent years, Top Cloud Yunnong has done a lot of agricultural production projects in Xinjiang. Naturally, our soil compactness analyzer has applications there, and even we have one. The customer is cotton, and the customer places special emphasis on our soil compactness tester. In order to obtain higher product and crop quality, modern agricultural production often requires the best possible control of all aspects of crop growth, so our soil compactness tester is also used by customers to sow cotton seeds. Some people may question, do I have to test each pit seed sowing? In fact, this is not the case. We only need to put a certain amount of soil in a container with a unit area, then sow the seeds, and then use different weights to press the same amount of time on the soil surface per unit area. After this test, record the data and observe. In the latter stage of the seed germination, it is possible to determine how much tighter the soil is most conducive to the production of the cotton seed. After that, our cotton planters can directly use the forceful tool to compact the soil on the seed pit. In order to ensure the correctness of the work, a certain amount of spot checks should be performed after sowing.

Through this example also let us understand that the soil compactness tester can not only determine the soil physical properties including soil texture, structure, porosity, etc., involving soil solidity, plasticity, permeability, drainage, impoundment Ability, difficulty of root penetration, etc. It can also be used on the sowing of cotton, which is another new use of the product.

LED Light Aluminum Die Casting Parts

As one of the leading die casting manufacturers with over 10 years of experience, Zheke Mould Company has been offering superior die casting parts for LED lighting manufacturing and other indudustries. With our professional technicians and cutting-edge die casting process, every piece of our parts comes out with reliable quality and cost effectiveness.

Our die casting services for LED Light Aluminum Die Casting Parts include the use of aluminum alloys. A key advantage of using aluminum in the die casting process is its low cost - aluminum parts are much less expensive than parts produced by other manufacturing processes. From a functionality perspective, aluminum die cast parts typically weigh one-third less than steel parts, while still offering the strength and durability that is essential for any lighting fixture.

Benefits of aluminum die casting for LED Light Aluminum Die Casting Parts include:

  • The ability to configure parts into various shapes and sizes.
  • The ability to incorporate features such as stand offs for assembly, side holes, flatness as required without secondary operations.
  • Excellent electrical conductivity
  • Superior thermal properties, making it suitable for use in high-temperature lighting applications.
  • The ability to easily be powder coated for enhanced aesthetic appeal.
  • Customization to accommodate the needs of low- and high-volume manufacturing operations.


Our capabilities encompass precise high-pressure die casting for a wide range of lighting parts including:


We're a Full-Service Lighting Parts Manufacturer.

LED Light Aluminum Die Casting Parts,Light Aluminum Die Casting Parts,Household Appliance Aluminum Die Casting Parts

Zheke Mould Technology Co. Ltd. , https://www.zkdiecasting.com