Our glass drinkwares are including Tumblers , winde glasses, Mixed Drinkware Sets, Shot Glasses, Goblets And Chalices, Beer Glasses , martini and whisky glasses, Snifters and mixting glasses and their carafes, they're lead-free, and are safe and healthy for your drinking. Our glass drinkwares could satisfy your diffrent drinking such as water, wine, beer, brandy, cocktail, whisky, champagne, vodka and juice.
We have thousands of diffrent molds for your selection, we also could customize glass drinkwares according to your design, and we could do diffrent effects including solid color, spraying color, electroplating, ion-plating, logo engraving and printing, liquid luster and hand-drawing.
Glass drinkwares
Glass Drinkwares,Water Glass Drinkwares,Glass Transparent Drinkwares,Promotional Glass Drinkwares Hebei Better Refined Gift And Craft Co., Ltd. , https://www.brglasswares.com
1ã€Before setting up, check the sound. Lift the wheel with a rope and tap the wheel. The sound should be crisp and free from vibrato or murmur.
2. The diameters of the two flanges must be equal so that the grinding wheel does not break due to bending stress. The minimum diameter of the flange should not be less than 1/3 of the diameter of the grinding wheel, and should not be less than 2/3 in the absence of a protective cover.
3, between the grinding wheel and the flange must be placed on rubber, felt and other elastic materials to increase the contact surface, so that the force evenly. After being clamped, after static balance, the grinding wheel should be tested at the maximum speed for 5 minutes before it can be used officially.
4. Adjustment method of the static balance of the grinding wheel of the CNC grinding machine When using the manual operation to adjust the static balance of the grinding wheel, the balancer, the balancer, the balancer, and the leveler must be used.
China Machine Tool Network Xiaobian reminds that the following points should be noted:
1) The balancer should be horizontal, especially vertical.
2) Shake off the coolant in the grinding wheel.
3) The grinding wheel should be fastened, and the flange and counterweight should be washed.
4) The inner cone of the flange of the grinding wheel must be tightly fitted with the balancer mandrel, and the mandrel should not be bent.
5) After balancing the grinding wheel, the balance block should be fastened.
6) The balancer is preferably knife-edge type, because the contact surface with the mandrel is small, reflecting more sensitive.
First, CNC Grinding Machine Grinding Wheel Installation and Repair Integer Grinding Machine Grinding Wheel Installation and Dressing Grinding Wheel Installation The general grinding wheel installation adopts flange mounting. The following points should be noted when installing: