We can supply both Chinese brand and foreign brand generator.
Ricardo Diesel Generator set, from 10kw to 300kw.
Cummins Diesel Generator Set, from 10kw to 800kw.
Perkins Diesel Generator, from 10kw to 800kw.
Deutz Diesel Generator, from 10kw to 120kw.
Standards:
Generator sets meets GB/TB2820 general technical specifications for Diesel Generator
set
Electric
performance for generator sets,
Rated
voltage: 480-110V
Connection
method: 3 phase, 4 wires or 1 phase 3 wires.
Rated
frequency: 50 Hz or 60 Hz
Rated speed:
1500rpm or 1800rpm
Frequency regulation:
steady state ≤-5%
Transient
state ≤±10%
Steady state
voltage regulation ≤±1%
Power factor:
0.8 lagging
Line voltage
wave from distortions:≤5
We own profession generator personal
who has strong experience
Offer 8-1000kw generator maintain
business
Supply generator machine room design
and installation project
Offer diesel generator installation,
adjust, theory instruction, and training.
Offer automatic generator from
normal, and humanization intelligent control.
Offer diesel generator machine room
noise reduction project
Supply standard
collocation
Diesel Engine , with
all accessories, fuel/air/oil filters, electric systems
Alternator
Steel structure base
or with base fuel tank
Fan, radiator, cooling
system
Flange connector
12V/24V starter and
charge alternator
Air filter, fuel
filter and oil filter
On-board control
panel, alarm and stop in condition of high water temperature, low oil pressure,
over speed, over load
MCCB air conservation
switch
12V/24V start
accumulator and batter line
Generator vibration
absorber
High-efficient muffler
Diesel Generator Deutz Diesel Generator, Ricardo Diesel Generator, Weichai Diesel Generator, Lovol Diesel Generator Weifang Huatian Diesel Engine Co., Ltd , https://www.enginepart.nl
Official Youtube Website:Â https://www.youtube.com/channel/UCM7Vp_mbWDKm3pgK3uyKBbg/featured
Product Description 
Application:
1. PVA Water Soluble 3D Printing Filament Extruding Production Line;
2. TPU/TPR(elastomer) 3D Printing Filament Extruding Production Line;
3. ABS(engineering material) and PLA(biodegradable) 3D Printing Filament Extruding Production Line.
Product Characteristics:
1. Extrusion stability, high precision;
2. The water sink can be adjusted three-dimensionally;Â
3. Traction servo control, stable operation, high precision;Â
4. Lines are adopted servo control and neat; Â
5. The advanced gas shaft is used for fixing. The plates of loading and unloading are simple.
Equipment Model:
Type
Diameter(mm)
L/D
Motor power(kw)
Output(kg/hr)
Dimension(L*W*H)
TD-SJC25
25
12/15
1.5/2.2
0.5-2
3*0.8*1.2
TD-SJC35
35
25/28
7.5
8-12
13*1.5*2.3
TD-SJC45
45
25/28
15
18-22
14.5*1.5*2.3
Scope of supply:
No.
Item name
Quantity
1.0
Drying hopper
1 set
2.0
Single screw extruder
1 set
3.0
Die head
1 set
4.0
Water sink
2 sets
5.0
Infra red ray diameter laser gauge
1 set
6.0
Traction machine
1 set
7.0
Horizontal wire storage rack
1 set
8.0
Double station automatic winding machine
1 set
User Production Workshop:
Packing & Shipping
Our machine is fisrt painted with anticorrosive oil, and then wrapped in the plastic film before it is finally packed in the wooden case.
Packing: wooden case for export, fit for multiple handing and long distance marine shipping.
Delivery time: within 30 days.
Contact Us
Company Information
Nanjing Tengda Machinery Co.,Ltd.-- To push the research and development of the high-end twin screw extruder machine, our company establised Twin Screw Technology Research and Development Business Division with the No.58 Research Institute of China North Industries Group Corporation Limited in 2013. In order to speed up the industrialization of military-civilian integration technology, the sophisticated technology is injected into out company so as to maximize the advantages of high-end twin screw extruder in China. 
Our Services:
Pre-sales service:
~Introducing in detail features and application of the products to customer
~Selecting economical and practical machine & equipment for customer
~Providing operation data of the related machine & equipment
~Providing means of trial performance for customer
Sales service:
~Recommending engineering conditions required for installation of the machine & equipment
~Communicating in time the manufacturing progress of the machine with user
~Providing assistance in technical conditions, screw combination and barrel disposition needed for product
After-sales service:
~Providing on-the-spot technical assistance in installation, commission and training
~Filling in detail customer's informationÂ
~Providing long-term maintenance service and spare parts
~Giving technical support to customer for developing new product
~Providing free maintenance for a year.Â
Â
Official Youtube Website:Â https://www.youtube.com/channel/UCM7Vp_mbWDKm3pgK3uyKBbg/featured
Product DescriptionÂ
Application:
1. PVA Water Soluble 3D Printing Filament Extruding Production Line;
2. TPU/TPR(elastomer) 3D Printing Filament Extruding Production Line;
3. ABS(engineering material) and PLA(biodegradable) 3D Printing Filament Extruding Production Line.
Product Characteristics:
1. Extrusion stability, high precision;
2. The water sink can be adjusted three-dimensionally;Â
3. Traction servo control, stable operation, high precision;Â
4. Lines are adopted servo control and neat; Â
5. The advanced gas shaft is used for fixing. The plates of loading and unloading are simple.
Equipment Model:
Type
Diameter(mm)
L/D
Motor power(kw)
Output(kg/hr)
Dimension(L*W*H)
TD-SJC25
25
12/15
1.5/2.2
0.5-2
3*0.8*1.2
TD-SJC35
35
25/28
7.5
8-12
13*1.5*2.3
TD-SJC45
45
25/28
15
18-22
14.5*1.5*2.3
Scope of supply:
No.
Item name
Quantity
1.0
Drying hopper
1 set
2.0
Single screw extruder
1 set
3.0
Die head
1 set
4.0
Water sink
2 sets
5.0
Infra red ray diameter laser gauge
1 set
6.0
Traction machine
1 set
7.0
Horizontal wire storage rack
1 set
8.0
Double station automatic winding machine
1 set
User Production Workshop:
Packing & Shipping
Our machine is fisrt painted with anticorrosive oil, and then wrapped in the plastic film before it is finally packed in the wooden case.
Packing: wooden case for export, fit for multiple handing and long distance marine shipping.
Delivery time: within 30 days.
Contact Us
Company Information
Nanjing Tengda Machinery Co.,Ltd.-- To push the research and development of the high-end twin screw extruder machine, our company establised Twin Screw Technology Research and Development Business Division with the No.58 Research Institute of China North Industries Group Corporation Limited in 2013. In order to speed up the industrialization of military-civilian integration technology, the sophisticated technology is injected into out company so as to maximize the advantages of high-end twin screw extruder in China.Â
Our Services:
Pre-sales service:
~Introducing in detail features and application of the products to customer
~Selecting economical and practical machine & equipment for customer
~Providing operation data of the related machine & equipment
~Providing means of trial performance for customer
Sales service:
~Recommending engineering conditions required for installation of the machine & equipment
~Communicating in time the manufacturing progress of the machine with user
~Providing assistance in technical conditions, screw combination and barrel disposition needed for product
After-sales service:
~Providing on-the-spot technical assistance in installation, commission and training
~Filling in detail customer's informationÂ
~Providing long-term maintenance service and spare parts
~Giving technical support to customer for developing new product
~Providing free maintenance for a year.Â
Â
Model NO.: TD-SJC45
Engagement System: Non-Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Don′t Exhaust
Automation: Automatic
Computerized: Computerized
Item Name: PLA Biodegradable Filament Extruder
Application: 3D Printing Filament
Diameter: 1.75mm 3mm
Color: Customized
Main Market: Turkey/Mexico/USA/Russia etc
Motor Power: 15kw
Output: 20kg/H
Inverter: Toshiba or ABB
Contactor: France Schneider Contactors
Warranty: One Year
Trademark: TENDA
Transport Package: Wooden Case or Container
Specification: 18.7CBM
Origin: Jiangsu
Model NO.: TD-SJC45
Engagement System: Non-Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Don′t Exhaust
Automation: Automatic
Computerized: Computerized
Item Name: PLA Biodegradable Filament Extruder
Application: 3D Printing Filament
Diameter: 1.75mm 3mm
Color: Customized
Main Market: Turkey/Mexico/USA/Russia etc
Motor Power: 15kw
Output: 20kg/H
Inverter: Toshiba or ABB
Contactor: France Schneider Contactors
Warranty: One Year
Trademark: TENDA
Transport Package: Wooden Case or Container
Specification: 18.7CBM
Origin: Jiangsu
PLA Biodegradable Filament Extruder
PLA Biodegradable Filament Extruder