CNC Laser Engraving Machine is one type of Co2 Cnc Laser Engraving Machine which is mainly used for all type of images ,letters ,characters marking on the surface of most of non metal material .Machine normally choose 60-80W laser tube which has very thin laser beam for the finest engraving quality .Meanwhile ,when Laser set 100% output ,it could also use to do cutting on material such as Acrylic ,clothes ,wood ,plastic etc .
CNC Laser Engraving Machine Laser Engraving Machine Co2,Laser Engraving Machine For Cutting,Cnc Laser Engraving Machine,Co2 Laser Cutting Machine Jinan Rapid CNC Machinery Co.,LTD , https://www.gildemeistercnc.com
High Weir Double Spiral Classifier/screw classifier:
High Weir Spiral Classifier entensively suitable for metal ore selection procedure when grading the ore slurry by size, it can also be used to get rid of the mud, dehydrates in washing ore, ofter make up a close circle together with the ball mill.
Double spiral classifier Working Principle
The grinded pulp is fed into tank from the inlet in the middle of settlement region, and the slurry classification sedimentation area is under the inclined tank. The spiral with low speed rotation stirs the slurry, so that the fine particles rice, and the coarse particles sinks to the bottom of tank. Overflow weir is above the bearing center which is under screw shaft, and is underneath overflow end.
Features and advantages of concentrating spiral classifier/screw classifier
1).Simple structure, reliable running and easy operation.
2).It mechanically classifies through the mechanism of different sedimentation speed of solid particle in liquid due to different size and different specific gravity.
3).It can classify the ground material powder from the grinder, spiral the coarse grain into material inlet of grinder through the spiral chip, and discharge the classified fine grain from overflow surface.
4).Its base is made from channel steel, and its body is welded from steel plate.
5).The lower support of spiral bearing is of engine-bearing structure of good wear resistance and durability.
6).The lifting device is of electric and manual mode.
Main Technical Parameters of the double spiral classifier :
Â
Model
Type
Spiral diameter(mm)
Flume length(mm)
Spiral speed(r/min)
Capacity(t/d)
Motor power(kw)
Weight(t)
Return sand
Overflow
Drive
Upgrade
High
Weir
Spiral
ClassifierFG7.5
750
5500
6-10
340-570
65
3.0
By Hand
2.7
FG10
1000
6500
5.0-8.0
675-1080
110
5.5
By Hand
4.43
FG12
1200
6500
5.0-8.0
1170-1870
155
5.5
1.5
8.7
FG15
1500
8400
4.0-6.0
1830-2740
235
7.5
2.2
12.5
FG20
2000
8400
4.0-6.0
3240-5400
400
11
2.8
20.5
FG24
2400
9210
3.6
4650-7450
580
15
3.0
25.6
FG30
3000
1250
3.2
11625
890
22
4.0
37.7
2FG12
1200
6500
5.0-8.0
2340-3740
310
5.5×2
1.5×2
14.0
2FG15
1500
8400
4-6.0
3660-5480
470
7.5×2
1.5×2
21.1
2FG20
2000
8400
3.0-5.5
7780-11880
800
11×2
2.8×2
36.5
2FG24
2400
9210
3.6
13600
1160
15×2
3×2
46.8
2FG30
3000
12500
2.0-3.2
14600-23400
1785
22×2
4×2
73.0
Submerged
Spiral
ClassifierFC12
1200
8400
5-8
1170-1870
120
7.5
2.2
10.4
FC15
1500
10500
4.0-6.0
1830-2740
185
7.5
2.2
16.8
FC20
2000
12900
2.0-5.5
3895-5940
320
15
2.8
29.1
FC24
2400
14200
2.5-4.0
4650-7450
455
18.5
4
41.0
FC30
3000
14300
3.2
11625
705
30
4
56.8
2FC15
1500
10500
4.0-6.0
2280-5480
370
7.5×2
1.5×2
30.7
2FC20
2000
12900
3.0-5.5
6480-11800
640
11×2
3×2
50.0
2FC24
2400
14200
3.67
9300-14900
910
18.5×2
4×2
67.9
2FC30
3000
14300
3.2
23300
1400
30×2
4×2
85.3
Double spiral classifier package and shipping :
Our service :
Hengxing equipment  can provide turkey service for customers, such as engineering consultation, engineering design, equipment manufacturing, packing & transportation, installation & commissioning personnel training etc.
About Spare Parts
Hengxing equipment will be dedicated to provide our customers with genuine spare parts with high quality. With our technological advice, the life cycle of your machine can be prolonged and sustained significantly with high effectiveness.
About Training
Hengxing equipemnt could offer excellent facilities and comfortable environment and training services to different customers. The training should include product training, safety training, operation training, maintenance know-how, technical know-how training, and regulations training, etc. All of the training is customized to fulfill every customer's expectations. Training programs can be conducted in our workshop, or at customer's site.
About Installation and Commissioning
Hengxing equipment  are able to guide the overall installation of whole set production line, including crushing production line and cement equipment production line, etc., which will allow you to start the normal operation of equipment immediately. After installation,we will make inspection of the whole machine commissioning and operation condition and provide you testing data report of installation.
Â
Â
High Weir Double Spiral Classifier/screw classifier:
High Weir Spiral Classifier entensively suitable for metal ore selection procedure when grading the ore slurry by size, it can also be used to get rid of the mud, dehydrates in washing ore, ofter make up a close circle together with the ball mill.
Double spiral classifier Working Principle
The grinded pulp is fed into tank from the inlet in the middle of settlement region, and the slurry classification sedimentation area is under the inclined tank. The spiral with low speed rotation stirs the slurry, so that the fine particles rice, and the coarse particles sinks to the bottom of tank. Overflow weir is above the bearing center which is under screw shaft, and is underneath overflow end.
Features and advantages of concentrating spiral classifier/screw classifier
1).Simple structure, reliable running and easy operation.
2).It mechanically classifies through the mechanism of different sedimentation speed of solid particle in liquid due to different size and different specific gravity.
3).It can classify the ground material powder from the grinder, spiral the coarse grain into material inlet of grinder through the spiral chip, and discharge the classified fine grain from overflow surface.
4).Its base is made from channel steel, and its body is welded from steel plate.
5).The lower support of spiral bearing is of engine-bearing structure of good wear resistance and durability.
6).The lifting device is of electric and manual mode.
Main Technical Parameters of the double spiral classifier :
Â
Model
Type
Spiral diameter(mm)
Flume length(mm)
Spiral speed(r/min)
Capacity(t/d)
Motor power(kw)
Weight(t)
Return sand
Overflow
Drive
Upgrade
High
Weir
Spiral
ClassifierFG7.5
750
5500
6-10
340-570
65
3.0
By Hand
2.7
FG10
1000
6500
5.0-8.0
675-1080
110
5.5
By Hand
4.43
FG12
1200
6500
5.0-8.0
1170-1870
155
5.5
1.5
8.7
FG15
1500
8400
4.0-6.0
1830-2740
235
7.5
2.2
12.5
FG20
2000
8400
4.0-6.0
3240-5400
400
11
2.8
20.5
FG24
2400
9210
3.6
4650-7450
580
15
3.0
25.6
FG30
3000
1250
3.2
11625
890
22
4.0
37.7
2FG12
1200
6500
5.0-8.0
2340-3740
310
5.5×2
1.5×2
14.0
2FG15
1500
8400
4-6.0
3660-5480
470
7.5×2
1.5×2
21.1
2FG20
2000
8400
3.0-5.5
7780-11880
800
11×2
2.8×2
36.5
2FG24
2400
9210
3.6
13600
1160
15×2
3×2
46.8
2FG30
3000
12500
2.0-3.2
14600-23400
1785
22×2
4×2
73.0
Submerged
Spiral
ClassifierFC12
1200
8400
5-8
1170-1870
120
7.5
2.2
10.4
FC15
1500
10500
4.0-6.0
1830-2740
185
7.5
2.2
16.8
FC20
2000
12900
2.0-5.5
3895-5940
320
15
2.8
29.1
FC24
2400
14200
2.5-4.0
4650-7450
455
18.5
4
41.0
FC30
3000
14300
3.2
11625
705
30
4
56.8
2FC15
1500
10500
4.0-6.0
2280-5480
370
7.5×2
1.5×2
30.7
2FC20
2000
12900
3.0-5.5
6480-11800
640
11×2
3×2
50.0
2FC24
2400
14200
3.67
9300-14900
910
18.5×2
4×2
67.9
2FC30
3000
14300
3.2
23300
1400
30×2
4×2
85.3
Double spiral classifier package and shipping :
Our service :
Hengxing equipment  can provide turkey service for customers, such as engineering consultation, engineering design, equipment manufacturing, packing & transportation, installation & commissioning personnel training etc.
About Spare Parts
Hengxing equipment will be dedicated to provide our customers with genuine spare parts with high quality. With our technological advice, the life cycle of your machine can be prolonged and sustained significantly with high effectiveness.
About Training
Hengxing equipemnt could offer excellent facilities and comfortable environment and training services to different customers. The training should include product training, safety training, operation training, maintenance know-how, technical know-how training, and regulations training, etc. All of the training is customized to fulfill every customer's expectations. Training programs can be conducted in our workshop, or at customer's site.
About Installation and Commissioning
Hengxing equipment  are able to guide the overall installation of whole set production line, including crushing production line and cement equipment production line, etc., which will allow you to start the normal operation of equipment immediately. After installation,we will make inspection of the whole machine commissioning and operation condition and provide you testing data report of installation.
Â
Â
Model NO.: FG750*5500,FG1000*6500,FG1500*8400,FG2000*8400mm
Energy Saving: Energy Saving
Warranty: 1 Year
Color: Grey
Customized: Customized
Condition: New
Brand: Hengxing
Price: Factory Price
Drawing: Offer
Spare Parts: Supply for Whole Using Time
Installation: Engineer Oversea Service
After Sale Service: Supply for Whole Using Life
Trademark: HengXing
Transport Package: Standard Container, Small Parts by Wooden Box
Specification: ISO, CE
Origin: China
Model NO.: FG750*5500,FG1000*6500,FG1500*8400,FG2000*8400mm
Energy Saving: Energy Saving
Warranty: 1 Year
Color: Grey
Customized: Customized
Condition: New
Brand: Hengxing
Price: Factory Price
Drawing: Offer
Spare Parts: Supply for Whole Using Time
Installation: Engineer Oversea Service
After Sale Service: Supply for Whole Using Life
Trademark: HengXing
Transport Package: Standard Container, Small Parts by Wooden Box
Specification: ISO, CE
Origin: China
Mineral Separator Double  Spiral Classifier for Gold Ore Beneficiation Plant
Contact:
Sara Pang
Mobile phone :Â Â 0086137 8347 1727
Â
Â
Mineral Separator Double  Spiral Classifier for Gold Ore Beneficiation Plant
Contact:
Sara Pang
Mobile phone :Â Â 0086137 8347 1727
Â
Â