Layout Type: Verticle
Additional Capabilities: Drying, Granulating, Coating, Mixing
Operating type: Continuous Operating
Condition: New
Mixing Drum: Circular Groove
Feeding Rate: 0.4-0.6
Diameter of Mixing Materials: 40-3000
Load Factor: 0.4-0.6
Mixing Time: 4-10min
Operating: Cycle Operating
Trademark: WJ
Transport Package: Wooden Case
Specification: DSH 0.3/0.5/1/2-30
Origin: China
HS Code: 8419399010
Layout Type: Verticle
Additional Capabilities: Drying, Granulating, Coating, Mixing
Operating type: Continuous Operating
Condition: New
Mixing Drum: Circular Groove
Feeding Rate: 0.4-0.6
Diameter of Mixing Materials: 40-3000
Load Factor: 0.4-0.6
Mixing Time: 4-10min
Operating: Cycle Operating
Trademark: WJ
Transport Package: Wooden Case
Specification: DSH 0.3/0.5/1/2-30
Origin: China
HS Code: 8419399010
DSH Double Screw Cone Mixer machine equipment
 
Description
DSH double screw mixer integrates powder, granule and liquid mixing. The rotation of twin screw mixer is completed by a set of motors and cycloid reducers. With asymmetric mixing by two screws, the stirring range will be expanded and stirring speed will accelerate.



Feature 
1.Homogeneous mixing
2.Short mixing time 5-15 minutes
3.Clean discharge & no leftover
4.Central discharge valve:
Electronic, pneumatic, manual (optional)
Ball valve, flap valve, knife gate valve, butterfly valve (optional)
5.Main shaft seal:Stuffing seal and air purge seal
6.Drive:Siemens motor, cycloid or gear reducer
7.Limit/safety switch (optional)
8.Heating/cooling jacket optional)

Helix cone mixer application:

1.Applicable material proportion of the poor, the powder particles are relatively large materials;
2.Suitable for ceramic glaze mixing gentle process, the material particles do not pressure-fed or broken;
3.The heat-sensitive materials will not overheat;
4.In the powder - powder mixing process is very easy to add working conditions or providing a liquid to a plurality of spray outlet means;
5.The bottom valve of dislocation convenient material, since the bottom of the spiral no fixtures, so there is no pressure fed phenomenon

Below Spec for Dry Powder Ribbon Mixer:

Model Total Capacity(CBM) Loading factor Motor Power(kw) Dimention(Max diameter*Height)(mm) Weight(kg)
DSH-0.06 0.06 0.4-0.6 1.5 630*1451 150
DSH-0.1 0.1 1.5 715*1569 250
DSH-0.3 0.3 2.2 920*1960 550
DSH-0.5 0.5 3 1140*2320 600
DSH-1 1 4 1480*2898 1200
DSH-1.5 1.5 5.5 1633*3210 1350
DSH-2 2 5.5 1816*3495 1500
DSH-3 3 7.5 2040*3760 2300
DSH-4 4 11 2250*4425 2520
DSH-6 6 15 2548*4940 3000
DSH-8 8 18.5 2780*5360 4500
DSH-10 10 22 3018*5815 5500
DSH-12 12 22 3204*6100 5900

Double Screw Fertilizer Powder Cone Ribbon Mixer/Conical Screw Ribbon Blender
 

Double Screw Fertilizer Powder Cone Ribbon Mixer/Conical Screw Ribbon Blender


Double Screw Fertilizer Powder Cone Ribbon Mixer/Conical Screw Ribbon Blender


  DSH Double Screw Cone Mixer machine equipment
 
Description
DSH double screw mixer integrates powder, granule and liquid mixing. The rotation of twin screw mixer is completed by a set of motors and cycloid reducers. With asymmetric mixing by two screws, the stirring range will be expanded and stirring speed will accelerate.



Feature 
1.Homogeneous mixing
2.Short mixing time 5-15 minutes
3.Clean discharge & no leftover
4.Central discharge valve:
Electronic, pneumatic, manual (optional)
Ball valve, flap valve, knife gate valve, butterfly valve (optional)
5.Main shaft seal:Stuffing seal and air purge seal
6.Drive:Siemens motor, cycloid or gear reducer
7.Limit/safety switch (optional)
8.Heating/cooling jacket optional)

Helix cone mixer application:

1.Applicable material proportion of the poor, the powder particles are relatively large materials;
2.Suitable for ceramic glaze mixing gentle process, the material particles do not pressure-fed or broken;
3.The heat-sensitive materials will not overheat;
4.In the powder - powder mixing process is very easy to add working conditions or providing a liquid to a plurality of spray outlet means;
5.The bottom valve of dislocation convenient material, since the bottom of the spiral no fixtures, so there is no pressure fed phenomenon

Below Spec for Dry Powder Ribbon Mixer:

Model Total Capacity(CBM) Loading factor Motor Power(kw) Dimention(Max diameter*Height)(mm) Weight(kg)
DSH-0.06 0.06 0.4-0.6 1.5 630*1451 150
DSH-0.1 0.1 1.5 715*1569 250
DSH-0.3 0.3 2.2 920*1960 550
DSH-0.5 0.5 3 1140*2320 600
DSH-1 1 4 1480*2898 1200
DSH-1.5 1.5 5.5 1633*3210 1350
DSH-2 2 5.5 1816*3495 1500
DSH-3 3 7.5 2040*3760 2300
DSH-4 4 11 2250*4425 2520
DSH-6 6 15 2548*4940 3000
DSH-8 8 18.5 2780*5360 4500
DSH-10 10 22 3018*5815 5500
DSH-12 12 22 3204*6100 5900

Double Screw Fertilizer Powder Cone Ribbon Mixer/Conical Screw Ribbon Blender
 

Double Screw Fertilizer Powder Cone Ribbon Mixer/Conical Screw Ribbon Blender


Double Screw Fertilizer Powder Cone Ribbon Mixer/Conical Screw Ribbon Blender


 

Single Head CNC Engraving Machine is mainly used Marble, bluestone, jade crystal, agate, glass, plastic cement, ceramic, stainless steel, titanium, copper, iron, aluminum, bamboo and other hardwood surface of virtue and sculpture, and carved according to different materials, a variety of different carving methods to choose from, enough to achieve different styles of artistic effects, such as carved Yin and Yang sculpture, line drawing, flat, round, sharp carving the end effect.

Single Head Cnc Engraving Machine

Single Head Cnc Engraving Machine,Wood Furniture Engraving Machine,Wood Carving Engraving Machine,Wood Engraving Machine

Nanjing Diding Numerical Control Technology Co.,Ltd. , https://www.dinglicncmachine.com