Model NO.: MPDM-36
Heat Source: Heat Transfer Oil
Control Mode: P.I.D. Microprocessor
Temp. Working Range: +45ºC to 320ºC
Temp. Control Accuracy: Within +/- 1 ºC
Heating Method: Direct Heating (Indirect Cooling)
Application: Die Casting Industries
Expantion Tank Volume: 62L
Net Weight: 300kg
Trademark: MAIPT
Transport Package: Wooden Case as Usual
Specification: 1385*650*1400
Origin: China
HS Code: 8419899090
Heating Mold Used Temperature Control Equipment (MPDM-36) Special for Die Casting Industry

 
 BRIEF DESCRIPTION WWW.MAIPT.LTD/
 
Mold Temperature Control Units(TCU) PID process controller are used to preheat a process to the desired operating temperature by engaging the unit's electric immersion heater and recirculating the oil in the system. Oil type TCU circulate high temperature heat transfer fluid through the process application for temperature control.

MPDC/MPDM series Heat Transfer Oil type TCU are specially engineered for the temperature control in die casting industry.
 
According to the temperature difference of stationary mold and movable mold, it has two methods of temperature control for selection: one is single-circuit and the other is dual-circuits. Both of them can provide the temperature range from 45°C to 320 °C, customized heating capacity and voltages are available.

Heating Mold Used Temperature Control Equipment (MPDM-36)
 FEATURES / FUNCTIONS / SAFETY PROTECTIONS WWW.MAIPT.LTD/
 
  BASIC FUNCTIONS * OPTIONAL FUNCTIONS
- Thermometer for return oil   * Control mode: PLC
- Switchover of heating power   * Explosion-proof device
- Automatic air-exhausting after startup   * Delay cooling after shutdown
- Control mode: Microcomputer control   * RS485 remote control function
- BY-PASS pressure release loop for hot oil   * Air-blowing and return oil function
- Isolated electric cabinet for long service life   * Negative-pressure system running
- SUS integrated pipelines for less pipe resistance   * Customizable multi-point Temperature unit
- System pressure & Functional test before shipping   * Customizable horse power and heating power for Oil Pump
  SAFETY PROTECTIONS                                                   
  Temperature anomaly                                    →  Alarm and cut off power, when cycle-oil's Temp. exceed upper limit.
  Power reverse                                              →  Power supply phase detection to prevent pump reverse, alarm indication.
  Pump overload →  Thermal overload relay protect pump from overloading, alarm indication.
  Low oil protection →  Level-switch detects the oil level, prevent low oil and alarm indication.
  Pressure anomaly →  Automatic stop heating operation when system pressure anomaly.
  Anomaly heating →  Heating contactor working, and anomaly heating alarm indication.
  Pipe blockage →  BY-PASS pressure release loop to protect pump.
  Air exhaust Function →  Automatic air-exhausting after startup.
  Short circuit →  Air-break switch - releasing.
 
 DETAILS SHOW WWW.MAIPT.LTD/
Heating Mold Used Temperature Control Equipment (MPDM-36)
 TECHNICAL SPECIFICATION WWW.MAIPT.LTD/

Specification Table for MPDC/MPDM Series
Model Heating Capacity Pump Data Pipe Connecting Approx. Dimention
Power Flow Lift Inlet Outlet Weight L*W*H
KW BTU/Hr KW L/min m DN DN KG mm
MPDC-18 9*2 61,434 0.5 35 60 15 15 170 1150*420*1000
MPDC-36 15*2 102,390 1.1 60 60 20 20 200 1250*420*1000
MPDC-48 20*2 136,520 2.8 100 80 25 25 225 1350*500*1150
MPDM-18 18+18 122,868 0.55*2 30 50 15*2 15*2 300 1250*550*1150
MPDM-36 30+30 204,780 1.1*2 60 60 20*2 20*2 340 1250*550*1150
MPDM-48 40+40 273,040 2.8*2 100 80 25*2 25*2 380 1335*600*1350
Remark: 1. Above specifications just for reference, we reserve the right to change specifications without notice.
2. Above items are only a part of ours, customization for special specifications is also acceptable. 
3. Three types of contactor output optional: Physical contactor, Solid State Contactor, SCR Contactor.               
 
Specification Details for MPDM-36
No. Part Name Specification Technical Data
1   Power Supply 3N-380-50HZ
2   Hot Medium Oil
3   Control Mode PC board Self-optimized microprocessor
4   Temp. Control Accuracy  PID±1ºC
5   Temp. Control Range  Inlet-Oil Temp. ( +45ºC~320ºC )
6   Heating Power 30KW +30KW( 15KW *2 +15KW *2 ) Adjustable
7   Heat Exchange Area 0.36M2+0.36M2
8   Heating Method Direct heating ( Indirect cooling )
9 Pump  Model TOE/C4281
10 Power Consumption 1.1KW
11 Delivery Lift 30M
12 Flow Rate 30L/Min
13 Pipeline Diameter Hot Medium Inlet/Outlet DN20*2 (Adjustable, no more than DN20) 
14 Cooling Water Inlet/Outlet DN15
15 Drain Oil Port DN15
16 Temperature Controller Model P6100 (Accuracy PID±1ºC)
17 Modulating Action Dual PID control of heating and cooling
18 Temp. Interaction Stick K- thermocouple
19 Display State Respectively display setpoint & real point
20 Output Select Relay output
21 Heat Transfer Oil Volume ( Inside Pipeline ) Approx20L
22 Special Function Oil Return Return oil back suction of oil pump
23 Machine Frame Size L x W x H 1650*550*1250mm ( Exclude the casters )
24 Expension Tank Volume 62L
25

Camshaft Position Sensor detects the camshaft's speed, position, acceleration, and even deceleration. This is important because this information is used to control ignition timing and fuel injection timing. Information on these is sent by the sensors to the engine management system, which makes the adjustments needed for the fuel injection's timing. With a properly working Sensor, your engine can run smoothly and more economically. Meaning, you'll have less engine problems while you're able to save fuel at the same time.

Camshaft Position Sensor

Camshaft Position Sensor,Electrical Camshaft Position Sensor,Engine Camshaft Position Sensor,Jeep Camshaft Position Sensor

NINGBO DGOFEN AUTO TRADE CO., LTD , http://www.dgofen.com