Model NO.: NT-HBF-MP
Power: Electric
Start Up: Electric Pump
Industry: Food Pumps
Media: Water etc.
Performance: Sanitary Pumps
Theory: Magnetic Drive Pump
Trademark: NEW TEK
Transport Package: Carton
Specification: 16/19 L/min
Origin: China
HS Code: 84132000
Model NO.: NT-HBF-MP
Power: Electric
Start Up: Electric Pump
Industry: Food Pumps
Media: Water etc.
Performance: Sanitary Pumps
Theory: Magnetic Drive Pump
Trademark: NEW TEK
Transport Package: Carton
Specification: 16/19 L/min
Origin: China
HS Code: 84132000

Magnetic Drive Pump 15R With Stainless Steel Head,homebrew,with 220V European Plug,High Temperature Resisting 140C

Description:
 
1. Products made of stainless steel head High temperature resistant blade Spindle and leaf separation will not leak Leakage of contaminated liquid
Not easy to plug Suitable for wort Recycling of saccharification on the boiled wort after the cycle of cooling and playing wort into the fermentation tank can be used
 
2. Pump extraction medium temperature changes should be controlled within 100 ºC, high temperature does not exceed 120 degrees
 
(warmming tips)/ magnetic pump precautions! 
1. The magnetic pump is forbidden to empty the transport (the pump is closed when the outlet valve is closed).
2. If the pump is running, it must be stopped within 1 minute.
(Gas into the pump head caused by the page idle water flow water shortage)
4. Magnetic pump recommended continuous operation; often on / off the opportunity to greatly reduce the pump life.
5. Pump extraction medium temperature changes should be controlled within 100 ºC, high temperature does not exceed 130 degrees
Excessive temperature rise / fall may cause damage to pump parts (eg shafts, bearings).
6. If the pump is suddenly powered off, the power must be switched off immediately and the outlet gate valve closed.
 
Feature:
1/2"NPT thread
With Stainless Steel Head
 
Max Capacity: 16/19 L/min .
Rated Capacity: 8/12 L/min .
Max  Head :2.7/3.4 Meter .
Rated Head:1.5 Meter .
 
Notice:
1-  Our Magnetic Pump with the CE certificate.
2-  It is made by Big Factory,not the Small workshop.
3-  It is with the very high quality,   we will make a secure and hard packing , please don't worry!      
4-  If you need the CE certificate,please contact us fee free, we can send it to your email.

Magnetic Drive Pump 15R With Stainless Steel Head,homebrew,with 220V European Plug,High Temperature Resisting 140C

Description:
 
1. Products made of stainless steel head High temperature resistant blade Spindle and leaf separation will not leak Leakage of contaminated liquid
Not easy to plug Suitable for wort Recycling of saccharification on the boiled wort after the cycle of cooling and playing wort into the fermentation tank can be used
 
2. Pump extraction medium temperature changes should be controlled within 100 ºC, high temperature does not exceed 120 degrees
 
(warmming tips)/ magnetic pump precautions! 
1. The magnetic pump is forbidden to empty the transport (the pump is closed when the outlet valve is closed).
2. If the pump is running, it must be stopped within 1 minute.
(Gas into the pump head caused by the page idle water flow water shortage)
4. Magnetic pump recommended continuous operation; often on / off the opportunity to greatly reduce the pump life.
5. Pump extraction medium temperature changes should be controlled within 100 ºC, high temperature does not exceed 130 degrees
Excessive temperature rise / fall may cause damage to pump parts (eg shafts, bearings).
6. If the pump is suddenly powered off, the power must be switched off immediately and the outlet gate valve closed.
 
Feature:
1/2"NPT thread
With Stainless Steel Head
 
Max Capacity: 16/19 L/min .
Rated Capacity: 8/12 L/min .
Max  Head :2.7/3.4 Meter .
Rated Head:1.5 Meter .
 
Notice:
1-  Our Magnetic Pump with the CE certificate.
2-  It is made by Big Factory,not the Small workshop.
3-  It is with the very high quality,   we will make a secure and hard packing , please don't worry!      
4-  If you need the CE certificate,please contact us fee free, we can send it to your email.

This kind of Armature Powder Coating Machine can meet the requirement of different armature dimension. It makes the whole powder coating process far more iconvinient than by manual. Once it can automatically powder a considerable amount of armatures. The powder coating process is very sample by machine. Firstly, operator load armautures on the fixture. Then press start button. Machine will do the rest process, including powderiing, blowing, powder recycling and ect. The powder time and material is as per customer's requirement.

Armature Powder Coating Machine

Armature Powder Coating Machine,Epoxy Coating Machine,Insulating Powder Coating Machine,Rotor Powder Coating Machine

Ningbo Nide Mechanical Equipment Co., Ltd. , http://www.nide-auto.com